Updated parts for easier manufacturing
Open, Needs TriagePublic

Description

So far we have

Z upper right: mini-hibiscus/Production_parts/printed_parts/z_upper_right_mini2/Z_upper_right_test.stl

Z upper left: mini-hibiscus/Production_parts/printed_parts/z_upper_left_mini2/Z_upper_left_test.stl

Z lower left: mini-hibiscus/Production_parts/printed_parts/z_lower_left_mini2/Z_lower_left_double_shear_v1.1.stl

Z lower right: mini-hibiscus/Production_parts/printed_parts/z_lower_right_mini2/Z_lower_right_double_shear_V1.1.stl

Adjustable belt tensioner:mini-hibiscus/Production_parts/printed_parts/adjustable_belt_tensioner/adjustable-Belt_tensioner_v2.1.stl

Y belt mount: mini-hibiscus/Production_parts/printed_parts/y_belt_mount/y_belt_mount_v5.stl

X belt mount: mini-hibiscus/Production_parts/printed_parts/x-belt_mount/mini2_X-Belt_mount_v0.4.6.stl

X idler end: mini-hibiscus/Production_parts/printed_parts/x_end_idler_mini2/X_end_idler_belt_tension_v2.1.stl

mini-hibiscus/Production_parts/printed_parts/x_end_idler_mini2/x_idler_adjustable_V1.2.1.stl

X motor end: mini-hibiscus/Production_parts/printed_parts/x_end_motor_mini2/x_end_motor_belt_tension_v2.stl

mini-hibiscus/Production_parts/printed_parts/x_end_motor_mini2/x_motor_adjustable_v1.3.1.stl

Y single bearing holder: mini-hibiscus/Production_parts/printed_parts/y-single-bearing-holder/y_single_bearing_holder.stl

Z tensioner for 2.1 idler and 2.0 motor: mini-hibiscus/Production_parts/printed_parts/adjustable_belt_tensioner/Z_belt_tensioner.stl
@tutley

west created this task.Jun 18 2018, 12:29 PM
tutley updated the task description. (Show Details)Jun 18 2018, 12:42 PM
west updated the task description. (Show Details)Jun 18 2018, 12:44 PM
DaniAO added a subscriber: DaniAO.Jun 18 2018, 2:15 PM
DaniAO added a comment.Aug 7 2018, 3:11 PM

ECO has been started and completed for the Single Y bearing holder, X motor end, and the adjustable belt tensioners for X and Y.

DCO have been started for the Single Y bearing holder, X motor end to be rolled in as soon as we can and the DCO for adjustable belt tensioners for X and Y will be done here in a few weeks.

Single bearing and x carriage parts are in use in production.