Page MenuHomeAleph Objects Inc

PVA profile for V2 Dual
Closed, ResolvedPublic

Description

Cura 3.2.23. We found that the V2 Flexydually does not have a material or profile for PVA. Note that this is for the second flexy extruder, as that will be used for support.

Event Timeline

karrad assigned this task to anolen.Aug 2 2018, 3:15 PM
karrad added a subscriber: karrad.

We need to generate a esun PVA profile for the V2 dual extruder. We will use the same one for TAZ 5 and TAZ 6, and will only require a standard profile.

alexei changed the edit policy from "All Users" to "Cura LulzBot Edition (Project)".Aug 10 2018, 1:47 PM
karrad reassigned this task from anolen to lansky.Oct 26 2018, 11:48 AM
karrad added a subscriber: anolen.

@lansky With all the development for Banded/Dingy/Quiver coming up, do you think you and your team could develop a PVA profile? R&D is too busy right now to get profiles made for legacy tool heads

@karrad We can give it a shot. I'll have the weekend crew work on it.

jlund added a subscriber: jlund.Oct 30 2018, 4:20 AM

I have been working on the PVA profile for the Flexydually, and once I created a material profile for it, Cura ended up finding the actual profile profiles for it. The standard profile worked out well for the impossible gears print. I am still testing the high speed and high detail profiles, but here is the material profile that I set up for it.

All three profiles seem to work pretty well, however the prime tower gets positioned on the back side of the bed in the grey area. I have tried uploading the profile with a change in location for it, however Cura seems to not save it, or allow me to export it out, or even find it under the Manage Profiles. The positioning I was using for testing was X 30mm and Y 10mm which positioned the prime tower on the front left of the bed.

I forgot to add that I'm using Cura LE 3.2.31 for this.

karrad closed this task as Resolved.Nov 12 2018, 11:26 AM

PVA profiles added