Page MenuHomeAleph Objects Inc

Polydissolve profile issues
Open, Needs TriagePublic


We have been seeing some issues with the Polydissolve profile causing some heat creep issues when printing with PLA on the Dual v3. The heat transfer between the two cause both to experience heat creep and fail out fairly consistently on longer prints. We typically recommend lowering the print temperature for both filaments, but I have found that if you lower Polydissolve to 195 (or just use the PVA profile) you eliminate heat creep on both filaments.

Event Timeline

nathan created this task.Sep 11 2018, 12:07 PM