Page MenuHomeAleph Objects Inc

Rear Label
Closed, ResolvedPublic


Need completed rear label design with certification marketings and other requirements.

  • Space for model number/serial number label
  • 'Aleph Objects, Inc.'
  • '626 W 66th Street Loveland, CO 80538, USA'
  • 'For Indoor Use Only'
  • ETL Intertek mark: /shared-j/Documents/R&D/product_certification/Intertek/markings/RE_ETL_Certification/
    • The 'listed' in the mark has to be legible in print
    • '5011454' control number under the ETL mark, see example, /shared-j/Documents/R&D/product_certification/Intertek/hibiscus/reference/Label Information - Direct Imprint(1).pdf
  • 'Conforms to UL Std. 60950-1'
  • 'Certified to CAN/CSA Std. C22.2 No. 60950-1'
  • CE mark
  • FCC mark
  • 'CAN ICES-3(B) / NMB-3(B)'
  • RCM mark (reviewing to confirm)
  • WEEE mark
  • 'Input: 100-240V ~ 50-60Hz, 3.2A', positioned as the bottom of the label

Event Timeline

nickp triaged this task as Normal priority.
nickp created this object with edit policy "LulzBot Hardware Products (Project)".

These look to be the same cert numbers as for the Mini 2. Quiver will be getting certified on all of these with new cert numbers later on in development, correct? Besides that and the printer model, this label is the same as on the Mini 2 and will fit on the back of the control box of the current Quiver build we have in creative. Draft with old Cert numbers is attached.

@DRobertson yeah those were a copy and paste from Mini 2. Feel free to modify the above if needed.

@DRobertson would you be able to update the name on this please?

Name has been updated. Certs all still need to be confirmed or updated. Files are attached.


The amp need to be updated to 7 please.

Also, since there is more real estate on the back of quiver, would it be possible to add the caution, risk of electric shock, do not open warning to the right of the sticker, so it lines up with outer side of the control box? Would help to combine these into one sticker.

We are wanting to have this mock up for Intertek by Monday please?

DaniAO removed a subscriber: nickp.Feb 21 2019, 1:46 PM

Two drafts are ready for review with sizing in the file. Both meet sizing standards for all logos and fit comfortably on the back of Quiver.

DaniAO added a subscriber: Steven.Feb 22 2019, 1:48 PM

@Steven thoughts on which one?

I think TAZ_Pro_AssetTag_Bleed_02.pdf is better as it has the more obvious placement of the Do Not Open caution close to the enclosure cover. I think this would more likely fill the Intertek requirements than the placement at the bottom on the other version.

DaniAO added a subscriber: jperry.Feb 25 2019, 9:59 AM

@jperry could you create a part number for this? Label it TAZ-Pro Certification sticker please!

I've created DC-LB0183 for this label.

kim added a subscriber: kim.Feb 25 2019, 12:01 PM

i HAVE CREATED AO partnumbers:
Packing list DC-MS0078
EC, Declaration of Conformity DC-MS0079
Safety Warnings DC-MS0080
Quality Assurance Record DC-MS0081
Quick Start Guide DC-MN0019

adam added a subscriber: adam.Apr 4 2019, 11:23 AM

@DRobertson the number on the Intertek label nuymber will be the same as the Mini 2 (5011454) - per our sales rep the control number is determined by manufacturing location. Can you finish out the art on this label so we can get it ordered?

Intertek label number has been added to the label. If nothing else is needed and all certifications are correct we are ready to order. File is attached. Email or Jabber me if the internal location is needed.

@Steven please review as well. Just would like another set of eyes on this one before we get it order and inspection scheduled.

Steven reassigned this task from DRobertson to DaniAO.Apr 8 2019, 3:08 PM
Steven added a subscriber: DRobertson.

@DaniAO everything there is correct.

DaniAO reassigned this task from DaniAO to jperry.Apr 8 2019, 3:13 PM

Artwork is linked in the product card- DC-LB0183.

@jperry can you get these order from my asset tag please?

@DRobertson The max size My Asset Tag has is 2 x 4. The current label is 2.5 x 4. Can you please resize this to 2 x 4?

In order to resize I've had to move around the elements of the sticker quite a bit. @DaniAO @Steven I'd like you both to review the changes since the structure has had to be altered so much. Most notably I've had to move the Electric Shock warning to the bottom of the tag. I know this isn't ideal but with the new dimensions it is the best place for it.

DaniAO added a comment.Apr 9 2019, 2:49 PM

I think it looks okay.. but we had the other labeled approved by Intertek.. so I am wondering if we have to get it reapproved?


DaniAO added a comment.Apr 9 2019, 3:34 PM

I have reached out to Mark at Intertek to find out if we can move forward with this label or if we need to get it re-certified.

The label has been sent to the label approval team

@jperry the new label has been approved.

Will get the link from @DRobertson to update the product card and we can get these ordered.


DaniAO closed this task as Resolved.Apr 17 2019, 11:08 AM

These have been ordered.