Page MenuHomeAleph Objects Inc

Missing parts on BoM
Closed, ResolvedPublic

Description

@tomc was pulling inventory and noticed a few parts that were not on there:

EL-WR0157 SELF-WRAPPING BRAIDED SLEEVING - 1/4" - BLACK - 100 FT SPOOL -
HD-MS0470 Two side Rubber seal Bearing, 623-2RS, ABEC1 grade
AS-HE0036 Quiver E3D Mirrored Aero Hot End 3.0mm, 0.5mm Nozzle, Hot Tightened
AS-HE0035 Quiver E3D Standard Aero Hot End 3.0mm, 0.5mm Nozzle, Hot Tightened

Are these parts used and need to be on the BoM?

Event Timeline

DaniAO created this task.Nov 28 2018, 1:38 PM
DaniAO created this object with edit policy "LulzBot Hardware Products (Project)".
west added a comment.EditedNov 28 2018, 1:39 PM

the hd-MS0470 need to replace the HD-MS0449

west added a comment.EditedNov 28 2018, 2:17 PM

We will wait on EL-WR0157 until we decide the full length on the toolhead
I will add AS-HE0036,35 Replace HD-MS0449 with HD-MS0470

west added a comment.Nov 28 2018, 2:22 PM
This comment was removed by west.
west added subscribers: kent, Steven.Nov 28 2018, 2:22 PM
This comment was removed by west.
west reassigned this task from west to Steven.Nov 28 2018, 2:23 PM
west added a subscriber: west.
west added a comment.Nov 28 2018, 3:34 PM
This comment was removed by west.
west added a comment.Dec 4 2018, 4:28 PM

The only thing left on this ticket is determining if we want to use the braided sleeving for the whole length of the toolhead harnesses or not... and the cable clamp of the shelf part depending on what we chose

DaniAO added a comment.Dec 7 2018, 1:11 PM

Looks like we are also missing HD-BL0032 as well.

west added a comment.Dec 11 2018, 10:09 AM

Belts and braided sleeving were added in T4829

kent added a comment.Dec 12 2018, 1:07 PM

Add EL-WR0157 SELF-WRAPPING BRAIDED SLEEVING - 1/4" - BLACK - 100 FT SPOOL -

Not done but I think this is in a different branch T4829

Add HD-MS0470 Two side Rubber seal Bearing, 623-2RS, ABEC1 grade

Not done

Add AS-HE0036 Quiver E3D Mirrored Aero Hot End 3.0mm, 0.5mm Nozzle, Hot Tightened

Done

Add AS-HE0035 Quiver E3D Standard Aero Hot End 3.0mm, 0.5mm Nozzle, Hot Tightened

Done

Remove HD-MS0449

Not done

Add HD-BL0032

Being done in another ticket.

So, I think all that needs to be done before this is ready to merge is to replace HD-MS0449 with HD-MS0470.

$ git diff master
diff --git a/production_docs/BOM.csv b/production_docs/BOM.csv
index 39835c4..463a77f 100644
--- a/production_docs/BOM.csv
+++ b/production_docs/BOM.csv
@@ -1,4 +1,6 @@
 Part #,Part Name,UoM,Qty,Released
+AS-HE0035,"Quiver E3D Standard Aero Hot End 3.0mm, 0.5mm Nozzle, Hot Tightened",PCE,1,
+AS-HE0036,"Quiver E3D Mirrored Aero Hot End 3.0mm, 0.5mm Nozzle, Hot Tightened ",PCE,1,
 AS-HB0006,"TAZ Etched Modular Print Bed Heater, no felt",PCE,1,Y
 AS-PR0023,90mm Cut wiper pad,PCE,2,
 AS-HE0035,"Quiver E3D Standard Aero Hot End 3.0mm, 0.5mm Nozzle, Hot Tightened",PCE,1,Y
west added a comment.Dec 12 2018, 1:10 PM

@kent I just looked and HD-MS0470 is in there and HD-MS0449 isnt

Steven closed this task as Resolved.Dec 13 2018, 12:20 PM

Something in the merge of master into this branch reverted changes. I re-added them and have merge this branch into master. Closing and will delete the branch shortly.