Page MenuHomeAleph Objects Inc

actuator end profile changing
Closed, ResolvedPublic

Description

Due to a revision from the supplier for the toolhead actuators, the end profile of the actuator shaft will be changing. This causes it to be around 5.7mm thick instead of 3mm. This requires a change to PP-MP0230.

Event Timeline

samantha created this task.Jan 4 2019, 9:55 AM
samantha created this object with edit policy "LulzBot Hardware Products (Project)".

Updated to have a wider slot and use a button head instead of a cap head to compensate. Added the 2 additional M3x8 button heads to the BOM. Could not find M3x8 socket heads on the BOM to remove.

west added a subscriber: west.Jan 7 2019, 8:10 AM

T4978 adds the 2x m3x8 SHCS for the actuator connectors

tutley added a subscriber: tutley.Jan 8 2019, 7:39 AM

I will tell actuonix that we have addressed the change on our end and the new design will be okay to roll forward with

kent added a subscriber: kent.Jan 9 2019, 8:58 AM

There are two different rev B's on this. I think I can fix it by adding the changes from one drawing to the other and then increment the rev letter.

kent added a comment.Jan 9 2019, 9:17 AM

Ok here is the revC that I made from the two different rev B's lmk if it looks good @samantha @west and we can merge it in.

@tutley or @samantha can you please review the merged duplicate rev B changes from Kent so we can close this one out?

@kent
5.5 vertical distance to hole added in Josh rev B should be 5.50 to match the original change by West
arrows on hole location callout are a different style than all the other arrows
2.6 distance in upper left is redundant. should be removed, and the depth of the c-bore added. that appears to have been my mistake.
arrows on diameter callout for the M4 are outside of the hole (looks like it was like that on my version too. I forgot when I was working on the model I noticed that was incorrect size, and the drawing tool didn't automatically update)
C under Rev column isn't aligned and its bothering me

kent added a comment.Jan 11 2019, 1:24 PM

Here's the pdf of the commit i just made for convenience

kent added a comment.Jan 11 2019, 1:33 PM

I don't know how to change the arrows being outside the hole on the M4 so I will need some help @samantha @tutley

@kent delete and remake. Dimensions done in the new workbench can be updated, but the ones in the old workbench need to be remade.

kent added a comment.Jan 14 2019, 7:43 AM

Ok here is the most recent version:

kent closed this task as Resolved.Jan 14 2019, 8:20 AM
kent claimed this task.

Ok thanks, this is merged into master.