Page MenuHomeAleph Objects Inc

QC to MER/Production Passdown - TAZ Pro, Multiple Part #s, Aero Idler Levers
Closed, ResolvedPublic

Description

TAZ Pro
PP-FP0135, Mirrored Aero Idler Lever
PP-FP0162, Standard Aero Idler Lever
Our supplier for this part, E3D, appears to have accidentally mixed some PP-FP0162's into bags of PP-FP0135's. Inspecting one bag of 500 PP-FP0135's, we found one PP-FP0162 mixed in.
It has been reported by MER that another bag also had this issue.
Due to this issue, and also the parts being nearly identical and easily mixed up on the assembly line, assemblers will need to know how to differentiate between the two.
Refer to the photos to see the difference between the pin that holds the bearing in place. The end of the pin is being referred to as a "Nub" in the photos.

One of each unit is being held for referencing/training in QC.

Event Timeline

AOJAS created this task.Mar 15 2019, 2:39 PM
AOJAS triaged this task as Low priority.Mar 15 2019, 3:50 PM
AOJAS added subscribers: MikeR, logan, oliver and 2 others.
logan removed a subscriber: logan.Mar 18 2019, 9:09 AM
kent closed this task as Resolved.Apr 1 2019, 11:10 AM
kent claimed this task.
kent added a subscriber: kent.

I'm printing these out to use as reference in pre-sub. Thanks for making them.

AOJAS added a comment.EditedMay 29 2019, 1:36 PM

A recent shipment of the PP-FP0135's had a white paint mark consistently in the same spot( a non-visible area once assembled). It looks like the supplier is adding this mark to differentiate the PP-FP0135 from the PP-FP0162.

On some units the paint is speckled on visible areas. It comes off pretty easily by finger or paper towel, so it shouldn't be an issue, I just wanted to make sure the issue is communicated to everyone.

@jperry

AOJAS added a subscriber: jperry.May 29 2019, 1:37 PM

Which part were the paint identifiers on? FP0135 or FP0162?

AOJAS added a comment.May 29 2019, 2:38 PM

The white paint dots are on the PP-FP0135's.