Page MenuHomeAleph Objects Inc

New profile creation error
Closed, ResolvedPublic

Description

Trying to make a new test profile for the PVA material. Profile appears created and selected. When looking in the drop down, however, it is not there.

Event Timeline

anolen created this task.Apr 29 2019, 11:19 AM

only happening in Taz Pro as far as I can tell

Also for PA-CF

Confirmed for bridge nylon as well. look like all materials are having this issue

anolen closed this task as Resolved.Apr 29 2019, 11:38 AM
anolen claimed this task.
This comment was removed by anolen.
anolen reopened this task as Open.Apr 29 2019, 11:57 AM

Seems to be for all materials in all categories, I have confirmed "Experimental" and "all"

confirmed it is happening on the T6 Dual V3 also

anolen triaged this task as Unbreak Now! priority.Apr 29 2019, 2:49 PM
karrad reassigned this task from anolen to victor_larchenko.Apr 29 2019, 2:50 PM
karrad added a subscriber: victor_larchenko.

@victor_larchenko I am not sure what broke here for the dual extruders, please push to your highest priority.

alexei changed the edit policy from "All Users" to "Restricted Project (Project)".Apr 29 2019, 2:54 PM
alexei added a subscriber: alexei.

@victor_larchenko , might be because of T6396 ?

@karrad fixed, the reason was global container stack is empty now by T2421

alexei moved this task from Restricted Project Column to Restricted Project Column on the Restricted Project board.Apr 30 2019, 7:19 AM
karrad added a comment.EditedApr 30 2019, 8:33 AM

@victor_larchenko Thank you for the quick fix, we can now create a profile and export it.

When trying to import the profile, I noticed one issue I was hoping you can take care of. When importing a profile, it will associate that profile for whatever material you have selected, instead of the material it was generated from.

I tested on a TAZ 6 and a TAZ pro with these profiles:


Looking at the exported profiles, they call out what materials, printers, and quality settings they are derived from:

[metadata]
setting_version = 4
material = PolyLite_PLA_(Polymaker)_lulzbot_quiver_evergreen_bagworm
type = quality_changes
quality_type = high speed

[metadata]
material = copperFill_(colorFabb)_lulzbot_taz6
quality_type = high speed
setting_version = 4
type = quality_changes

Would it be possible when importing profiles to check for this data, and automatically assign the profile to the correct material and printer combination regardless of what is the active material?

Steps to Duplicate:
1.) Generate a profile from existing settings/overrides on Polylite PLA TAZ Pro
2.) Export profile
3.) Clear cache and reboot cura
4.) Activate ABS Chromastrand labs
5.) Import exported profile from step 2

Actual Results:
Exported profile is now selectable from Chromastrand Labs ABS Material
Exported profile is not selectable from Polylite PLA

Desired Results:
Imported profile is only selectable when Polylite PLA is the active material

Yahuba added a subscriber: Yahuba.Apr 30 2019, 8:57 AM

Looks like its been figured out but just wanted to post here that I was able to replicate this bug on a Mini with an Aerostruder toolhead. So not sure if this was exclusive to dual extruders.

@karrad Fixed. Now profile importing for material which it was exported, if this material exists, otherwise to selected material.

karrad closed this task as Resolved.May 8 2019, 8:43 AM

@victor_larchenko Tested on a dual machine and single headed, with standard and experimental materials. Looks good, thanks for the fix!