Page MenuHomeAleph Objects Inc

No Part Number Currently 24v 40w Heater Cartridge, 235mm with Micro-Fit 3.0 Pin Terminations
Closed, ResolvedPublic

Description

Part Number: N/A

Part Description: We currently only have the 24v 40w Heater Cartridge, 235mm with the older style of pin terminations used on MOARStruder and V3 Dual. It would be exceptionally helpful if we could get a part made specifically for the heater cartridge with the newer style of Micro-Fit 3.0 pins for use on the V2 Aerostruders (SE, SL, HS, HS+, HE). A lot of our customers don't have the tools to switch out the pins on their heater cartridge for new ones even if we send them the new pins so having this part available is a pretty important thing for our customers ease of use IMO.
This would require a part that combines EL-MS0480 for the pins and EL-MS0184 for the heater cartridge.

Is it marked as can be sold? N/A

Is there a price set? N/A

Has this items been requested enough that it needs to have a retail kit set up for it? We will definitely want this part to be available as a retail kit if at all possible.

Thanks!

Event Timeline

Galadriel created this task.Aug 9 2019, 8:51 AM

Adding ticket ID for customer who needs this part under RMA so that if this is updated while I'm not here the customer can be informed.

ID: 209,995

DaniAO reassigned this task from karrad to adam.Aug 13 2019, 4:22 PM
DaniAO added a subscriber: adam.

Going to tag @adam into this one as he is most familiar with these parts.

adam added a comment.Aug 14 2019, 8:34 AM

We have plenty of the EL-MS0184 in stock. IIRC we were concerned that customers would break the microfit pins trying to remove the old ones and install the new ones. We can get a retail part project set up for this.

@adam We get a fair amount of requests for this part so I definitely think that getting a retail part set up for this would be a good idea. Thanks!

adam added a comment.Aug 20 2019, 9:34 AM

@DaniAO I am familiar with these parts and we have enough of the heaters on hand (I believe) to make a retail part for this, but I am slammed. can you put together a BOM for this into a retail part?

@Galadriel working on getting this set up for you

DaniAO added a subscriber: Heather.EditedAug 20 2019, 2:59 PM

KT-EL0074 is set up for this- @Heather can you please set up routing for this and put in an MO for 10 of these?

@Galadriel do we need these available on the website or are these good as is?

Once Heather is done, these should be good to sell.

Thanks!

@DaniAO

I think it would be a good idea to have these on the store, next to our other heaters

Heather closed this task as Resolved.Aug 21 2019, 5:49 AM

This product is set up and ready to be produced.

Heather reopened this task as Open.Aug 22 2019, 5:09 AM
Heather added a subscriber: draubach.

Per Dylan in ElectroMech:

"Just a quick question on the process of doing the KT-EL0074. Typically when we do a Hot End kit, it has the completed assembly number on the BOM. This one has the raw number. Are we just taking a raw part without trimming it or anything and throwing it in a bag and then putting in 2 loose crimps with it? Threw us off when we first looked at it and wanted to verify."

@draubach
@DaniAO

TSR would like the pins on the heater cartridge please.

The team will need a length for this wire as well @DaniAO

After consulting with @Kazkade, we would like to see drawings be sent to production teams prior to releasing MR's for them to build.

@west or @tutley Or @samantha would any of you be able to put a quick drawing together for this?

Thanks!

@DaniAO yea i can get one made up. Where should i push the drawing to? retail parts?

@DaniAO i will need a part number for this harness.
24V 40W 195mm length, molex microfit

@tutley AS-CB0084 has been set up with the bom.

@Heather can you please set up routing for this part number.

thank you!

@tutley yea push it to retail parts for now.

Thanks!

We now have two parts using Internal Reference number AS-CB0084; the valid one is Hibiscus LCD Harness Two, Mini 2. I suggest re-naming this new part since this harness is an existing one that is currently used on Mini 2. Will readdress after this occurs.

@Heather sorry about that.. AS-CB0096 is the new part number

@tutley sorry you will have to update your drawing as well!

Thanks for getting the new part set up for this!
I checked the part page with morning and it says we don't have any of these on hand, we have a customer who is currently waiting on these for an RMA so I wanted to check and see if I am okay to set up the RMA SO for a couple of these? We would only need 2. I just wanted to check on if we have someone with some free hands to throw two of these together before I set up the RMA for it. Thanks!

adam added a comment.Aug 30 2019, 10:05 AM

I was told these were being built yesterday, but I don't think there's anyone in ElectroMech today

@adam Thanks for the check in! I got tagged into the MO for this by Heater White a little while ago and she let me know the situation. You were exactly right :)

@DaniAO If I'm caught up on this ticket, it looks like we have some in Retail, but a price hasn't been set. We have a customer requesting one of these. If it's ready, could we get a price set?

@youngmrcarlson sorry about that. Price is set

adam closed this task as Resolved.Tue, Nov 26, 9:16 AM