Page MenuHomeAleph Objects Inc
Feed Advanced Search

Yesterday

adam removed a project from T9705: e3d volcano block drawing v5.3: Redgum.
Wed, Nov 20, 9:38 AM · Dingy Cutworm(1.2mm), Banded Tiger

Oct 10 2019

logan closed T9721: test die cast heatsinks as Wontfix.

would've been nice

Oct 10 2019, 1:17 PM · Cecropia Silk, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus, Quiver, Redgum
logan closed T9707: e3d titan hobb drawing as Wontfix.
Oct 10 2019, 1:16 PM · Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Redgum
logan closed T9708: e3d titan pinon gear drawing as Wontfix.
Oct 10 2019, 1:16 PM · Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Yellowfin, Redgum
logan closed T9709: e3d large gear as Wontfix.
Oct 10 2019, 1:16 PM · Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Redgum
logan closed T9703: e3d V6 nozzle drawing v8.1 as Wontfix.
Oct 10 2019, 1:16 PM · Angelfish, Yellowfin, Dingy Cutworm(1.2mm), Cecropia Silk, Banded Tiger, Achemon Sphinx, Quiver, Finch, Mini-Hibiscus, Redgum
logan closed T9710: e3d Titan aero sink drawing as Wontfix.
Oct 10 2019, 1:15 PM · Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Redgum
logan closed T9711: e3d e heater drawing as Wontfix.
Oct 10 2019, 1:15 PM · Mini-Hibiscus, Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Quiver, Redgum
logan closed T9717: rev2 e3d thermistor drawing as Wontfix.
Oct 10 2019, 1:15 PM · Yellowfin, Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Redgum

Sep 13 2019

Galadriel created T10061: Double Wiper Mount Width Causes Mounting Difficulties.
Sep 13 2019, 8:15 AM · Banded Tiger, Dingy Cutworm(1.2mm)

Sep 4 2019

kent added a comment to T9717: rev2 e3d thermistor drawing.

Missing cut and strip length tolerances. There is a tolerance table on the heater cartridges, but no electrical tolerances on this drawing. Could use more detail on the inside of the cartridge, potting material, installation depth, length of insulation inside the cartridge.

Sep 4 2019, 3:34 PM · Yellowfin, Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Redgum
kent added a comment to T9705: e3d volcano block drawing v5.3.

Probably want to make the tolerances on the heater and thermistor holes unilateral with -0 to ensure no fitment issues with the thermistors and heater cartridges.

Sep 4 2019, 3:30 PM · Dingy Cutworm(1.2mm), Banded Tiger
kent added a comment to T9709: e3d large gear.

Probably want the ID of the gear to be a unilateral tolerance with +0 to ensure good grip on the hobb knurled section.

Sep 4 2019, 3:25 PM · Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Redgum
kent added a comment to T9707: e3d titan hobb drawing.

Probably want to make that 5mm callout on the ends a unilateral tolerance to avoid interference where it goes into the bearing. More detail on the hobbgoblin profile and especially the knurling major diameter spec since that gets pressed into the titan large gear (we saw an issue with this on the v3 gear hobb setup).

Sep 4 2019, 3:25 PM · Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Redgum
kent added a comment to T9709: e3d large gear.

No tolerances.

Sep 4 2019, 3:21 PM · Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Redgum
kent added a comment to T9710: e3d Titan aero sink drawing.

The tolerance block doesn't cover the 9.000 hole where the bearing goes, we will probably want to set that as a unilateral tolerance so that we don't run into interference with the bearing.

Sep 4 2019, 3:20 PM · Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Redgum
west added a comment to T9711: e3d e heater drawing.

contact e3d

Sep 4 2019, 3:12 PM · Mini-Hibiscus, Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Quiver, Redgum
west added a comment to T9708: e3d titan pinon gear drawing.

contact e3d

Sep 4 2019, 3:12 PM · Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Yellowfin, Redgum
kent added a comment to T9711: e3d e heater drawing.

Also no tolerances on dimensional callouts here.

Sep 4 2019, 3:00 PM · Mini-Hibiscus, Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Quiver, Redgum
kent added a comment to T9708: e3d titan pinon gear drawing.

Not seeing any tolerances on this drawing.

Sep 4 2019, 3:00 PM · Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Yellowfin, Redgum
west added a comment to T9721: test die cast heatsinks.

I received 100 of the black oxide screws listed above and they work with the die cast heatsink

Sep 4 2019, 1:33 PM · Cecropia Silk, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus, Quiver, Redgum

Aug 29 2019

logan added a comment to T9721: test die cast heatsinks.

Glad I asked, those look sweet!
Them being black definitely reinforces wanting black screws.
Thanks

Aug 29 2019, 1:41 PM · Cecropia Silk, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus, Quiver, Redgum
west added a comment to T9721: test die cast heatsinks.

Aug 29 2019, 1:37 PM · Cecropia Silk, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus, Quiver, Redgum
logan added a comment to T9721: test die cast heatsinks.

@west just for my own curiosity do you have any pics of the die cast heat sinks?

Aug 29 2019, 1:32 PM · Cecropia Silk, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus, Quiver, Redgum
logan added a comment to T9721: test die cast heatsinks.

I don't see any issue with using those, I think it will look better than the silver ones. Lets do it!

Aug 29 2019, 1:30 PM · Cecropia Silk, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus, Quiver, Redgum
adam added a comment to T9721: test die cast heatsinks.

E3D can't drill and tap those holes right away and if they do set up for that the cost savings will be minimal from the milled heat sinks.
@west found some self-tapping screws that should blend better than the stainless steel: https://www.mcmaster.com/90935A135
We are still looking at a new screw with a phillips head instead of a hex.

Aug 29 2019, 11:42 AM · Cecropia Silk, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus, Quiver, Redgum

Aug 26 2019

west added a comment to T9721: test die cast heatsinks.

@logan, they dont tap the holes for the fan for us. We are essentially wedging the screw between the fins. With the new heatsink, the holes no longer align with gaps between the fins, there are untapped posts.
The plan is to roll this new heatsink in on all aero toolheads. @adam do you know the saving going to the new heatsink?

Aug 26 2019, 9:11 AM · Cecropia Silk, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus, Quiver, Redgum
logan added a comment to T9721: test die cast heatsinks.

@west They currently tap those locations for us in the machined heat sinks right? Is there concerns with doing so for the die cast ones?
Ultimately, socket cap hex heads are sturdier and the self tapping screws are Phillips if I remember correctly. The aesthetic appearance will change due to the color of the fastener also. This would require stocking a different fastener as well.
Would this heat sink change apply to all Aero hotends?

Aug 26 2019, 9:06 AM · Cecropia Silk, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus, Quiver, Redgum

Aug 20 2019

west updated subscribers of T9721: test die cast heatsinks.
Aug 20 2019, 3:16 PM · Cecropia Silk, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus, Quiver, Redgum
west reassigned T9721: test die cast heatsinks from west to adam.
Aug 20 2019, 2:58 PM · Cecropia Silk, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus, Quiver, Redgum
west added a comment to T9721: test die cast heatsinks.

I did some thermocouple testing on a regular heatsink and a die cast to see the differences by placing thermocouples in the fins both at the top and bottom. On average they are very similar

Aug 20 2019, 1:46 PM · Cecropia Silk, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus, Quiver, Redgum
west created T9721: test die cast heatsinks.
Aug 20 2019, 1:42 PM · Cecropia Silk, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus, Quiver, Redgum
kent added a comment to T9703: e3d V6 nozzle drawing v8.1.

This is the v8 version of the drawing. The 150 micron nozzles no longer have a question mark after the length of the orifice which is nice. There are a couple additional radius callouts, and the angle of the outside cone is called out.

Aug 20 2019, 1:28 PM · Angelfish, Yellowfin, Dingy Cutworm(1.2mm), Cecropia Silk, Banded Tiger, Achemon Sphinx, Quiver, Finch, Mini-Hibiscus, Redgum
kent triaged T9717: rev2 e3d thermistor drawing as Normal priority.
Aug 20 2019, 10:07 AM · Yellowfin, Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Redgum
kent triaged T9711: e3d e heater drawing as Normal priority.
Aug 20 2019, 9:51 AM · Mini-Hibiscus, Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Quiver, Redgum
kent triaged T9710: e3d Titan aero sink drawing as Normal priority.
Aug 20 2019, 9:49 AM · Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Redgum
kent triaged T9709: e3d large gear as Normal priority.
Aug 20 2019, 9:47 AM · Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Redgum
kent updated the task description for T9708: e3d titan pinon gear drawing.
Aug 20 2019, 9:44 AM · Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Yellowfin, Redgum
kent triaged T9708: e3d titan pinon gear drawing as Normal priority.
Aug 20 2019, 9:43 AM · Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Yellowfin, Redgum
kent added projects to T9707: e3d titan hobb drawing: Quiver, Mini-Hibiscus, Finch, Angelfish, Cecropia Silk, Banded Tiger, Dingy Cutworm(1.2mm).
Aug 20 2019, 9:41 AM · Dingy Cutworm(1.2mm), Banded Tiger, Cecropia Silk, Angelfish, Finch, Mini-Hibiscus, Quiver, Redgum
kent triaged T9705: e3d volcano block drawing v5.3 as Normal priority.
Aug 20 2019, 9:37 AM · Dingy Cutworm(1.2mm), Banded Tiger
kent added a project to T9703: e3d V6 nozzle drawing v8.1: Angelfish.
Aug 20 2019, 9:35 AM · Angelfish, Yellowfin, Dingy Cutworm(1.2mm), Cecropia Silk, Banded Tiger, Achemon Sphinx, Quiver, Finch, Mini-Hibiscus, Redgum
kent removed a project from T9703: e3d V6 nozzle drawing v8.1: gyrfalcon.
Aug 20 2019, 9:31 AM · Angelfish, Yellowfin, Dingy Cutworm(1.2mm), Cecropia Silk, Banded Tiger, Achemon Sphinx, Quiver, Finch, Mini-Hibiscus, Redgum
kent triaged T9703: e3d V6 nozzle drawing v8.1 as Normal priority.
Aug 20 2019, 9:28 AM · Angelfish, Yellowfin, Dingy Cutworm(1.2mm), Cecropia Silk, Banded Tiger, Achemon Sphinx, Quiver, Finch, Mini-Hibiscus, Redgum

Jun 24 2019

anolen added a comment to T3528: LCD status not updated.

Has anyone else noticed this recently? I haven't been running minis.

Jun 24 2019, 10:51 AM · Banded Tiger

Jun 3 2019

DaniAO reassigned T3759: Wiper pads change from DaniAO to adam.

Reassigning this to Adam as he was working on wiper pads.

Jun 3 2019, 3:27 PM · Dingy Cutworm(1.2mm), Banded Tiger

Apr 1 2019

kent added a comment to T3759: Wiper pads change.

this process was documented in the "Lulzbot whitepapers" if anyone knows what thoes are.

Apr 1 2019, 7:22 AM · Dingy Cutworm(1.2mm), Banded Tiger

Mar 31 2019

mbloom added a comment to T3759: Wiper pads change.

I did some research over the weekend, and found a thingiverse page where someone described how they're making their own wiper pads. They're using .25 inch polyester felt, Mcmaster part# 88085K311, cutting them to length, then soaking both sides in Lulzjuice (abs dissolved in acetone). He said thiat this process was documented in the "Lulzbot whitepapers" if anyone knows what thoes are. I think this is exactly what we've been using. Links below;

Mar 31 2019, 1:05 PM · Dingy Cutworm(1.2mm), Banded Tiger

Feb 26 2019

adam closed T4229: Banded Warehouse stock verification as Resolved.

These have been for sale for a while now - closing this ticket

Feb 26 2019, 8:54 AM · Banded Tiger
adam closed T2613: Banded Tracking as Resolved.
Feb 26 2019, 8:01 AM · Banded Tiger

Dec 13 2018

btiernan added a comment to T4229: Banded Warehouse stock verification.

Stock in retail and Chicago

Dec 13 2018, 10:17 AM · Banded Tiger

Nov 27 2018

anolen added a comment to T3759: Wiper pads change.

Updates on wiper pad testing data can be found here: T2885 and T2904

Nov 27 2018, 10:25 AM · Dingy Cutworm(1.2mm), Banded Tiger

Nov 26 2018

adam moved T4229: Banded Warehouse stock verification from Release Prep to Maintenance on the Banded Tiger board.
Nov 26 2018, 9:37 AM · Banded Tiger

Nov 21 2018

DaniAO added a comment to T2785: Maximum Volumetric Output for tool head add-ons.

This looks to be completed. Closing this one for now, can always reopen if needed.

Nov 21 2018, 10:21 AM · Achemon Sphinx, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus
DaniAO closed T2785: Maximum Volumetric Output for tool head add-ons as Resolved.
Nov 21 2018, 10:19 AM · Achemon Sphinx, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus
Orias added a comment to T4151: Banded Customer OHAI 11/16/18.

I'm rolling in a few minor edits. Thank you all for this!

Nov 21 2018, 9:04 AM · Banded Tiger
mcoronado closed T4151: Banded Customer OHAI 11/16/18 as Resolved.
Nov 21 2018, 8:49 AM · Banded Tiger
mcoronado added a comment to T4151: Banded Customer OHAI 11/16/18.

This OHAI is now live:
https://ohai.lulzbot.com/project/hs-08mm-tool-head-install-instructions/accessories/

Nov 21 2018, 8:48 AM · Banded Tiger
adam added a comment to T4151: Banded Customer OHAI 11/16/18.

@mcoronado step 4B has a lower case b
I think everything else looks good

Nov 21 2018, 7:24 AM · Banded Tiger

Nov 20 2018

mcoronado added a comment to T4151: Banded Customer OHAI 11/16/18.

Orais: Please review for approval:
https://ohai.lulzbot.com/project/hs-08mm-hardened-steel-tool-head-install-instr/drafts/

Nov 20 2018, 4:23 PM · Banded Tiger
mcoronado added a comment to T4151: Banded Customer OHAI 11/16/18.

@adam reformatting these has been a bit of an undertaking. I'll have them published tomorrow. @Orias Thanks for the help w/ Django markdown.

Nov 20 2018, 3:43 PM · Banded Tiger
adam added a comment to T4151: Banded Customer OHAI 11/16/18.

@mcoronado I see that some of these edits have been rolled in, but not all. We had at least one delivered last Saturday and several delivered/delivering this week so we need this finalized and pushed to the accessories section as soon as we can get it done.

Nov 20 2018, 3:40 PM · Banded Tiger
bowman closed T4219: Banded Initial Production MR as Resolved.

Both Banded and dingy are in full production

Nov 20 2018, 8:26 AM · Banded Tiger

Nov 19 2018

Orias added a comment to T4151: Banded Customer OHAI 11/16/18.

General feedback:

Nov 19 2018, 11:23 AM · Banded Tiger
Orias added a comment to T4151: Banded Customer OHAI 11/16/18.

Corrected link: https://ohai.lulzbot.com/project/hs-08mm-hardened-steel-tool-head-install-instr/drafts/

Nov 19 2018, 10:56 AM · Banded Tiger
Orias updated the task description for T4151: Banded Customer OHAI 11/16/18.
Nov 19 2018, 10:56 AM · Banded Tiger
mcoronado added a comment to T4151: Banded Customer OHAI 11/16/18.

@lansky List and photo has been updated to accurately reflect included materials.

Nov 19 2018, 10:23 AM · Banded Tiger
lansky added a comment to T4151: Banded Customer OHAI 11/16/18.

This looks good. I would like to list the included filament in step 2.

Nov 19 2018, 10:06 AM · Banded Tiger
mcoronado added a comment to T4151: Banded Customer OHAI 11/16/18.
Nov 19 2018, 7:52 AM · Banded Tiger
karrad added a comment to T4151: Banded Customer OHAI 11/16/18.

Photo added to step 2

Nov 19 2018, 7:28 AM · Banded Tiger

Nov 16 2018

DRobertson added a comment to T4151: Banded Customer OHAI 11/16/18.

Image has been updated and is attached.

Nov 16 2018, 1:25 PM · Banded Tiger
adam added a comment to T4151: Banded Customer OHAI 11/16/18.

@DRobertson Looks like we're still missing the extra pack of wiper pads in the included materials step 2 and the first print sample filament (unsure if we want to include the filament)

Nov 16 2018, 9:11 AM · Banded Tiger

Nov 15 2018

mcoronado added a comment to T4151: Banded Customer OHAI 11/16/18.

@DRobertson Will you please keep an eye on this tomorrow? If any changes are needed, feel free to login on my workstation. If they're good to go, please move out of "Drafts" to publish live.

Nov 15 2018, 2:55 PM · Banded Tiger
mcoronado added a comment to T4151: Banded Customer OHAI 11/16/18.

@adam steps and capitalization have been corrected.

Nov 15 2018, 2:52 PM · Banded Tiger

Nov 14 2018

adam added a comment to T4151: Banded Customer OHAI 11/16/18.

The 18a, 18b, and 18c highlights on the picture don't seem to match the written directions. You will also need to create the link to http://download.lulzbot.com/3D_Models/Wrench/ for the actual stl. I think in the past we've done something like "Load the first print model" and had "first print" be the link to the stl.
The written instructions could probably use some fleshing out and definitely some capitalization policing (lots of unintended lowercase directions in there).
Pictures look good - clear and obvious steps.

Nov 14 2018, 1:15 PM · Banded Tiger
mcoronado added a comment to T4151: Banded Customer OHAI 11/16/18.

@Hob @Orias @adam @DRobertson
Aside from the requested addition (above) a draft is ready for review:
https://ohai.lulzbot.com/project/hs-08mm-hardened-steel-tool-head-install-instr/drafts/

Nov 14 2018, 11:12 AM · Banded Tiger
mcoronado added a comment to T4151: Banded Customer OHAI 11/16/18.

@adam thanks for the heads up. I'll have to retake the photo and edit the step copy.

Nov 14 2018, 11:09 AM · Banded Tiger
karrad changed the edit policy for T2785: Maximum Volumetric Output for tool head add-ons.
Nov 14 2018, 7:52 AM · Achemon Sphinx, Dingy Cutworm(1.2mm), Banded Tiger, Mini-Hibiscus
adam closed T4202: Banded 0.8 printing feedback as Resolved.

Final profile tweaks and feedback have been moved into cura and it is capped - closing this as resolved.
If there are print issues, please open another ticket for specific issues.

Nov 14 2018, 7:34 AM · Banded Tiger
adam closed T3231: Profiles for Banded Tiger as Resolved.

Profiles are updated and loaded into CuraLE - closing as resolved.

Nov 14 2018, 7:23 AM · Banded Tiger
adam moved T2613: Banded Tracking from Alpha/Beta Stage to Maintenance on the Banded Tiger board.
Nov 14 2018, 7:23 AM · Banded Tiger
adam closed T3871: Banded (0.8) Z-Offset as Resolved.

closing as resolved

Nov 14 2018, 7:22 AM · Banded Tiger
adam closed T3249: Banded Tiger First Print as Resolved.

closing out since product is released and this model is in the repo as the first print.

Nov 14 2018, 7:21 AM · Banded Tiger
adam closed T4230: Banded Product release as Resolved.

Product is released for backorder

Nov 14 2018, 7:19 AM · Banded Tiger

Nov 13 2018

adam added a comment to T4151: Banded Customer OHAI 11/16/18.

@mcoronado the tool heads are coming with a pack of 5 wiper pad which the customer will need to fill the double wiper pad mount. I noticed on this OHAI draft that it's not pictured or mentioned and I wanted to make sure it gets in there.

Nov 13 2018, 8:07 AM · Banded Tiger
bowman added a comment to T4219: Banded Initial Production MR.

5 ea of both Banded and Dingy have been completed for initial build to verify routing/BoM's. Now ramping up production on both.

Nov 13 2018, 7:41 AM · Banded Tiger

Nov 12 2018

mcoronado added a comment to T4151: Banded Customer OHAI 11/16/18.

Drafts in progress:
https://ohai.lulzbot.com/group/drafts/

Nov 12 2018, 4:34 PM · Banded Tiger
karrad added a comment to T4202: Banded 0.8 printing feedback.

Just a heads up everyone, we plan to set a release candidate tomorrow. Get your feedback in now!

Nov 12 2018, 2:26 PM · Banded Tiger
Galadriel added a comment to T4202: Banded 0.8 printing feedback.

Machine Type: Mini with adapter
Toolhead Type: Banded (HS)
Firmware Version:
Cura Version: 3.2.32 (Firmware 1.1.9.28)
Material Being Used: ABS
Estimated age of filament: A few weeks
Profile being used: High Speed (0.6mm)
Environmental Description: Open air
Adjustments to profile: I added supports only touching build plate, and added a support roof to try and make removal easier.

Nov 12 2018, 1:39 PM · Banded Tiger
DRobertson added a comment to T3249: Banded Tiger First Print.

File prints adequately on all tests that I have done with Banded and has been added to downloads along with licensing. Once Downloads is updated it will be all set.

Nov 12 2018, 9:27 AM · Banded Tiger
mcoronado added a comment to T4151: Banded Customer OHAI 11/16/18.

Once given access to ohai.lulzbot.com, i'll start drafting content for review:

Nov 12 2018, 9:03 AM · Banded Tiger
mcoronado claimed T4151: Banded Customer OHAI 11/16/18.
Nov 12 2018, 9:01 AM · Banded Tiger
mcoronado reassigned T4151: Banded Customer OHAI 11/16/18 from mcoronado to DRobertson.
Nov 12 2018, 8:58 AM · Banded Tiger

Nov 9 2018

jessica closed T4423: PP-GP0398 Double wiper mount - buffers and MOs as Resolved.
Nov 9 2018, 1:29 PM · Dingy Cutworm(1.2mm), Banded Tiger
kforrest closed T3642: Banded Production OHAI as Resolved.
Nov 9 2018, 9:39 AM · Assembly Instruction Content Request, Banded Tiger
kforrest moved T3642: Banded Production OHAI from Writing worksteps to Under review on the Assembly Instruction Content Request board.
Nov 9 2018, 9:01 AM · Assembly Instruction Content Request, Banded Tiger
kforrest moved T3642: Banded Production OHAI from Taking photos to Writing worksteps on the Assembly Instruction Content Request board.
Nov 9 2018, 9:01 AM · Assembly Instruction Content Request, Banded Tiger
Galadriel added a comment to T4202: Banded 0.8 printing feedback.

Machine Type: Mini with adapter
Toolhead Type: Banded (HS)
Firmware Version:
Cura Version: 3.2.32
Material Being Used: IC3D PETG
Estimated age of filament: Roll has sticker saying 08/30/18
Profile being used: High Speed (0.6mm)
Environmental Description: Open air

Nov 9 2018, 8:45 AM · Banded Tiger
adam closed T4227: Banded Sales Review as Resolved.
Nov 9 2018, 8:34 AM · Banded Tiger
adam closed T4228: Banded TSR review as Resolved.
Nov 9 2018, 8:34 AM · Banded Tiger