Feed Advanced Search

Today

alexei closed T5274: Update firmware to 1.1.9.34 as Resolved.

Firmware was updated:
rCT25a245aaae33
rCBDab00b89c8072

Tue, Jan 15, 6:45 AM · Cura LulzBot Edition

Yesterday

alexei changed the edit policy for T4954: Print never ends.
Mon, Jan 14, 1:41 PM · Marlin, Quiver
alexei updated subscribers of T4954: Print never ends.

@matth , This sounds like a Marlin reset. If it's happening only for this particular printer it might be an electrical problem too. @marcio , are you able to reproduce it for other TAZ 7?

Mon, Jan 14, 1:41 PM · Marlin, Quiver
alexei committed rCBDab00b89c8072: Changed Marlin FW to v1.1.9.34 for all LulzBot printers. (authored by alexei).
Changed Marlin FW to v1.1.9.34 for all LulzBot printers.
Mon, Jan 14, 1:32 PM
alexei committed rCT25a245aaae33: Changed Marlin FW to v1.1.9.34 for all LulzBot printers. (authored by alexei).
Changed Marlin FW to v1.1.9.34 for all LulzBot printers.
Mon, Jan 14, 1:31 PM
alexei awarded Aleph Objects Inc. to recipient: mbloom.
Mon, Jan 14, 9:30 AM
alexei added a member for AO: mbloom.
Mon, Jan 14, 9:30 AM

Fri, Jan 11

alexei awarded Aleph Objects Inc. to recipient: jmalley.
Fri, Jan 11, 10:28 AM
alexei added a member for AO: jmalley.
Fri, Jan 11, 10:27 AM
alexei awarded Aleph Objects Inc. to recipient: nancy.
Fri, Jan 11, 10:26 AM
alexei added a member for AO: nancy.
Fri, Jan 11, 10:26 AM

Wed, Jan 9

alexei added a comment to T5195: collapsing setting categories sometimes makes them all disappear.

@logan, You can use them, just make sure you have a single instance of CuraLE running and also that you are clearing cache when switching versions.

Wed, Jan 9, 2:39 PM · Cura LulzBot Edition
alexei changed the edit policy for T5133: Mirror Upstream Cura Sources.
Wed, Jan 9, 2:23 PM · Cura LulzBot Edition
alexei changed the edit policy for T5061: Polydissolve profile is missing for Quiver .
Wed, Jan 9, 2:21 PM · Cura LulzBot Edition
alexei added a comment to T5195: collapsing setting categories sometimes makes them all disappear.

This is relevant:

Wed, Jan 9, 2:20 PM · Cura LulzBot Edition
alexei changed the edit policy for T5124: Curabuild readme outdated.
Wed, Jan 9, 2:13 PM · Cura LulzBot Edition
alexei triaged T5048: Profile request, PETG Moarstruder as Normal priority.
Wed, Jan 9, 2:12 PM · Cura LulzBot Edition
alexei triaged T5198: Slice Error 3.6.2 Dual v3 Extruder as Normal priority.
Wed, Jan 9, 2:10 PM · Cura LulzBot Edition
alexei assigned T5129: start/end gcode retract/prime not cooperating to karrad.
Wed, Jan 9, 2:08 PM · Cura LulzBot Edition, Quiver
alexei triaged T5146: double layer stacking - dual extrusion artifact as High priority.
Wed, Jan 9, 2:07 PM · Quiver, Cura LulzBot Edition
alexei added a comment to T5190: Cura 3.2.32 for Windows having difficulty with 100MB+ files.

@karrad ,
This is most probably numpy-stl or numpy problem.

Wed, Jan 9, 1:50 PM · Cura LulzBot Edition
alexei triaged T5190: Cura 3.2.32 for Windows having difficulty with 100MB+ files as Normal priority.
Wed, Jan 9, 1:42 PM · Cura LulzBot Edition
alexei merged T5194: collapsing setting categories sometimes makes them all disappear into T5195: collapsing setting categories sometimes makes them all disappear.
Wed, Jan 9, 1:41 PM · Cura LulzBot Edition
alexei merged task T5194: collapsing setting categories sometimes makes them all disappear into T5195: collapsing setting categories sometimes makes them all disappear.
Wed, Jan 9, 1:41 PM · Cura LulzBot Edition
alexei changed the edit policy for T5194: collapsing setting categories sometimes makes them all disappear.
Wed, Jan 9, 1:40 PM · Cura LulzBot Edition
alexei changed the edit policy for T5195: collapsing setting categories sometimes makes them all disappear.
Wed, Jan 9, 1:34 PM · Cura LulzBot Edition

Tue, Jan 8

alexei committed rCBae0c84f52e5c: Version set to 3.6.3 (authored by alexei).
Version set to 3.6.3
Tue, Jan 8, 1:38 PM
alexei closed T5043: Custom Support Plugin as Resolved.

Merged to master.

Tue, Jan 8, 11:56 AM · Cura LulzBot Edition
alexei added a comment to T5043: Custom Support Plugin.

@TKostennov ,
Confirmed that it's working. Very Nice !


I'll merge this to master.
How one can define extruder for this generated support?
If it can't be defined, probably we should implement it, but it will be a separate ticket I guess.

Tue, Jan 8, 11:51 AM · Cura LulzBot Edition

Mon, Jan 7

alexei closed T5034: When multiplying merged model for multi-extruder printer the extruder assignment is not transfered. as Resolved.

Merged to master.

Mon, Jan 7, 7:07 PM · Cura LulzBot Edition
alexei closed T5133: Mirror Upstream Cura Sources as Resolved.

Merged to master.

Mon, Jan 7, 7:05 PM · Cura LulzBot Edition
alexei committed rCB85f0daa5cef1: T5133: Mirror all sources used for CuraLE build on download.lulzbot.com or code. (authored by jebba).
T5133: Mirror all sources used for CuraLE build on download.lulzbot.com or code.
Mon, Jan 7, 3:53 PM
alexei claimed T5133: Mirror Upstream Cura Sources.

@jebba . I will add this patch to master.

Mon, Jan 7, 3:18 PM · Cura LulzBot Edition

Fri, Jan 4

alexei placed T5120: cura crashes when moving multiple objects on the bed, just closes or used to give a visual c++ runtime error up for grabs.
Fri, Jan 4, 9:49 AM · Cura LulzBot Edition
alexei triaged T5120: cura crashes when moving multiple objects on the bed, just closes or used to give a visual c++ runtime error as Normal priority.
Fri, Jan 4, 9:47 AM · Cura LulzBot Edition

Thu, Jan 3

alexei removed a member for AO: JustSkyler.
Thu, Jan 3, 9:06 AM

Fri, Dec 28

alexei added a comment to T4976: Smoke test 3.6.1.

@Yahuba , 3.6.1 should be ready for a smoke test now.

Fri, Dec 28, 9:09 AM · Cura LulzBot Edition
alexei changed the edit policy for T4976: Smoke test 3.6.1.
Fri, Dec 28, 9:08 AM · Cura LulzBot Edition
alexei closed T3202: Sync CuraEngine only with upstream 3.6 as Resolved.

I think I merged all the required changes to master. Closing this one as resolved for now.

Fri, Dec 28, 9:07 AM · Cura LulzBot Edition
alexei committed rCB19e269ff3181: Version set to 3.6.2 (authored by alexei).
Version set to 3.6.2
Fri, Dec 28, 8:49 AM
alexei triaged T5034: When multiplying merged model for multi-extruder printer the extruder assignment is not transfered. as Normal priority.
Fri, Dec 28, 8:02 AM · Cura LulzBot Edition
alexei closed T4940: Certain features missing in Cura LE 3.6 (such as Gyroid Infill) as Resolved.

@marcio : Not all CuraEngine parameters were merged into Cura itself: T3202. Gyroid Infill should be in Cura now.

Fri, Dec 28, 7:10 AM · Cura LulzBot Edition
alexei triaged T4940: Certain features missing in Cura LE 3.6 (such as Gyroid Infill) as Normal priority.
Fri, Dec 28, 7:07 AM · Cura LulzBot Edition
alexei added a comment to T4963: Cura port error.

@MikeR ,
This sounds like Marlin crash problem, not the cura problem. Seems like ttyACM0 just disappeared but since it was open, the cura kept trying to connect.
It will be hard to debug, unless you give us some more details. I'm pretty sure it's not Cura problem though.

Fri, Dec 28, 7:05 AM · Marlin, Cura LulzBot Edition, Quiver
alexei added a project to T4963: Cura port error: Marlin.
Fri, Dec 28, 7:02 AM · Marlin, Cura LulzBot Edition, Quiver
alexei triaged T5030: [LulzBot Forum] 3.2.32 - Printer Temp Inital Layer - Don't use 0 as Normal priority.
Fri, Dec 28, 6:50 AM · Cura LulzBot Edition
alexei added a parent task for T4976: Smoke test 3.6.1: T3202: Sync CuraEngine only with upstream 3.6.
Fri, Dec 28, 6:48 AM · Cura LulzBot Edition
alexei added a subtask for T3202: Sync CuraEngine only with upstream 3.6: T4976: Smoke test 3.6.1.
Fri, Dec 28, 6:48 AM · Cura LulzBot Edition
alexei merged T5009: c.3.6.1 not slicing with Dual v3 Extruder into T3202: Sync CuraEngine only with upstream 3.6.
Fri, Dec 28, 6:47 AM · Cura LulzBot Edition
alexei merged task T5009: c.3.6.1 not slicing with Dual v3 Extruder into T3202: Sync CuraEngine only with upstream 3.6.
Fri, Dec 28, 6:47 AM · Cura LulzBot Edition
alexei triaged T5009: c.3.6.1 not slicing with Dual v3 Extruder as Normal priority.
Fri, Dec 28, 6:46 AM · Cura LulzBot Edition
alexei merged task T5029: 3.6.1 wont slice with supports enabled into T3202: Sync CuraEngine only with upstream 3.6.
Fri, Dec 28, 6:45 AM · Cura LulzBot Edition
alexei merged T5029: 3.6.1 wont slice with supports enabled into T3202: Sync CuraEngine only with upstream 3.6.
Fri, Dec 28, 6:45 AM · Cura LulzBot Edition

Thu, Dec 27

alexei committed rCTf15db292df9f: T3202: Fix typo's. [CURA-5760] Feature support brim. (authored by Remco Burema <r.burema@ultimaker.com>).
T3202: Fix typo's. [CURA-5760] Feature support brim.
Thu, Dec 27, 3:54 PM
alexei committed rCTaaa4c3a252f6: T3202: brim_replaces_support is now based on the support infill extruder (authored by Tim Kuipers <t.kuipers@ultimaker.com>).
T3202: brim_replaces_support is now based on the support infill extruder
Thu, Dec 27, 3:54 PM
alexei committed rCT81257fff39d3: T3202: Fix spelling (authored by Ghostkeeper).
T3202: Fix spelling
Thu, Dec 27, 3:54 PM
alexei committed rCT23c58c4a786f: T3202: limit to extruder of top/bottom polygon connector (authored by Tim Kuipers <t.kuipers@ultimaker.com>).
T3202: limit to extruder of top/bottom polygon connector
Thu, Dec 27, 3:54 PM
alexei committed rCT8a823ef292ad: T3202: Add gyroid infill pattern. (authored by Mark Burton <markb@smartavionics.com>).
T3202: Add gyroid infill pattern.
Thu, Dec 27, 3:54 PM
alexei committed rCTd3df78857a09: T3202: JSON fix: connect_infill_polygons by default only when polygons can be… (authored by Tim Kuipers <t.kuipers@ultimaker.com>).
T3202: JSON fix: connect_infill_polygons by default only when polygons can be…
Thu, Dec 27, 3:54 PM
alexei committed rCTb2ada2070d7c: T3202: JSON setting: option to let support be replaced by brim or not (authored by Tim Kuipers <t.kuipers@ultimaker.com>).
T3202: JSON setting: option to let support be replaced by brim or not
Thu, Dec 27, 3:54 PM
alexei committed rCTffd80aab9493: T3202: Allow the full range of orientations (authored by fieldOfView).
T3202: Allow the full range of orientations
Thu, Dec 27, 3:54 PM
alexei committed rCT5d1d88d4272e: T3202: Don't give error value for infill layer thickness if no infill (authored by Ghostkeeper).
T3202: Don't give error value for infill layer thickness if no infill
Thu, Dec 27, 3:54 PM
alexei committed rCT4438e10de9df: T3202: Hide setting when support pattern is set to concentric... (authored by fieldOfView).
T3202: Hide setting when support pattern is set to concentric...
Thu, Dec 27, 3:54 PM
alexei committed rCTff12661b334b: T3202: Now zig_zaggify_infill is enabled for gyroid infill. (authored by alexei).
T3202: Now zig_zaggify_infill is enabled for gyroid infill.
Thu, Dec 27, 3:54 PM
alexei committed rCT3f35f0583d4e: T3202: Add draft shield distance into the prime tower position fomulas (authored by Lipu Fei <lipu.fei815@gmail.com>).
T3202: Add draft shield distance into the prime tower position fomulas
Thu, Dec 27, 2:08 PM
alexei committed rCT32ff58833e2d: T3202: Capital Letters In Setting Name. CURA-5623 (authored by Jack Ha <jackha@gmail.com>).
T3202: Capital Letters In Setting Name. CURA-5623
Thu, Dec 27, 2:08 PM
alexei committed rCTd5c74b74cd7b: T3202: Renamed snap_distance to minimum_polygon_circumference and changed the… (authored by Jack Ha <jackha@gmail.com>).
T3202: Renamed snap_distance to minimum_polygon_circumference and changed the…
Thu, Dec 27, 2:08 PM
alexei committed rCT7eb8a80bc1e2: T3202: Fix description of the setting (authored by fieldOfView).
T3202: Fix description of the setting
Thu, Dec 27, 2:08 PM
alexei committed rCT0fefd9b72140: T3202: JSON fix: only enable skin settings when there is skin (authored by Tim Kuipers <t.kuipers@ultimaker.com>).
T3202: JSON fix: only enable skin settings when there is skin
Thu, Dec 27, 2:08 PM
alexei committed rCT58e497a796cc: T3202: Add setting for Support Infill Line Direction (authored by fieldOfView).
T3202: Add setting for Support Infill Line Direction
Thu, Dec 27, 2:08 PM
alexei committed rCT80af250efc3b: T3202: Add user editable snap distance (authored by alexei).
T3202: Add user editable snap distance
Thu, Dec 27, 2:08 PM
alexei committed rCT442f88f6b5a7: T3202: Added the "Within Infill" combing option that functions identically to… (authored by alexei).
T3202: Added the "Within Infill" combing option that functions identically to…
Thu, Dec 27, 2:08 PM
alexei committed rCT5cb5715479dd: T3202: Bind Top Surface Skin Layers value to Top Surface Skin Extruder (authored by Lipu Fei <lipu.fei815@gmail.com>).
T3202: Bind Top Surface Skin Layers value to Top Surface Skin Extruder
Thu, Dec 27, 2:08 PM
alexei committed rCT497372b96a19: T3202: fix typo in setting formula (authored by Tim Kuipers <t.kuipers@ultimaker.com>).
T3202: fix typo in setting formula
Thu, Dec 27, 12:33 PM
alexei committed rCT3004ee3b5aa7: T3202: setting fix: make Connect Infill Polygons available for Multiplied Infill (authored by Tim Kuipers <t.kuipers@ultimaker.com>).
T3202: setting fix: make Connect Infill Polygons available for Multiplied Infill
Thu, Dec 27, 12:33 PM
alexei committed rCTe23c735dea90: T3202: make connect_infill_polygons true by default (authored by Tim Kuipers <t.kuipers@ultimaker.com>).
T3202: make connect_infill_polygons true by default
Thu, Dec 27, 12:33 PM
alexei committed rCTfaca19fe5bc8: T3202: Give warning when sum of volumes exceeds volume of prime tower (authored by alexei).
T3202: Give warning when sum of volumes exceeds volume of prime tower
Thu, Dec 27, 12:33 PM
alexei committed rCT4ecf88e4ecdc: T3202: Add infill_multiplier setting. (authored by Tim Kuipers <t.kuipers@ultimaker.com>).
T3202: Add infill_multiplier setting.
Thu, Dec 27, 12:33 PM
alexei committed rCT6b048876f9d3: T3202: settings: connect_skin_polygons and connect_infill_polygons (authored by Tim Kuipers <t.kuipers@ultimaker.com>).
T3202: settings: connect_skin_polygons and connect_infill_polygons
Thu, Dec 27, 12:33 PM
alexei committed rCT1874d9e91330: T3202: Disable 'Alternate Mesh Removal' and 'Remove Mesh Intersection' if… (authored by alexei).
T3202: Disable 'Alternate Mesh Removal' and 'Remove Mesh Intersection' if…
Thu, Dec 27, 12:03 PM
alexei committed rCT2e2dbc4dbf6e: T3202: allow zig_zaggify for linear infill because of infill_multiplier (authored by alexei).
T3202: allow zig_zaggify for linear infill because of infill_multiplier
Thu, Dec 27, 11:54 AM
alexei committed rCTee07c5f6f95c: T3202: Don't round the warning threshold (authored by alexei).
T3202: Don't round the warning threshold
Thu, Dec 27, 10:35 AM
alexei committed rCTee14ac9cff5f: T3202: Remove Wipe Nozzle After Switch and Purge Volume settings. The entire… (authored by alexei).
T3202: Remove Wipe Nozzle After Switch and Purge Volume settings. The entire…
Thu, Dec 27, 10:25 AM
alexei committed rCTf9a49706c28a: T3202: Added setting for initial layer support distance CURA-5527 (authored by Aleksei S <a.sasin@ultimaker.com>).
T3202: Added setting for initial layer support distance CURA-5527
Thu, Dec 27, 9:53 AM
alexei committed rCTf727ef56c4be: T3202: Remove all concentric_3d references (authored by Lipu Fei <lipu.fei815@gmail.com>).
T3202: Remove all concentric_3d references
Thu, Dec 27, 9:53 AM
alexei committed rCT189c32060ab6: T3202: Remove prime_tower_wall_thickness setting. In CuraEngine the wall… (authored by alexei).
T3202: Remove prime_tower_wall_thickness setting. In CuraEngine the wall…
Thu, Dec 27, 9:31 AM
alexei committed rCT8e2bc0500d72: T3202: Replaced one line with more manageable multiple lines for Default… (authored by alexei).
T3202: Replaced one line with more manageable multiple lines for Default…
Thu, Dec 27, 7:38 AM

Wed, Dec 26

alexei committed rCT8a60dfc2fa56: T3202: Make showing of support density image dependent on support pattern (authored by Ghostkeeper).
T3202: Make showing of support density image dependent on support pattern
Wed, Dec 26, 7:58 PM
alexei committed rCT741631bfe7d4: T3202: Additions to material_shrinkage_percentage addition. (authored by alexei).
T3202: Additions to material_shrinkage_percentage addition.
Wed, Dec 26, 7:58 PM
alexei committed rCTfca7e601cec6: T3202: Remove Alternate Cross 3D Pockets setting (authored by Ghostkeeper).
T3202: Remove Alternate Cross 3D Pockets setting
Wed, Dec 26, 7:58 PM
alexei committed rCT959889db8a6d: T3202: Remove Hollow Out Objects setting (authored by Ghostkeeper).
T3202: Remove Hollow Out Objects setting
Wed, Dec 26, 7:58 PM
alexei committed rCTdd6a6ea59e9e: T3202: Add some missing units to machine settings (authored by fieldOfView).
T3202: Add some missing units to machine settings
Wed, Dec 26, 7:58 PM
alexei committed rCT4e2482d9e903: T3202: Add cross_infill_density_image setting (authored by Tim Kuipers <t.kuipers@ultimaker.com>).
T3202: Add cross_infill_density_image setting
Wed, Dec 26, 7:58 PM
alexei committed rCT3443a886b74a: T3202: Added unit to adaptive layer height settings (authored by nallath).
T3202: Added unit to adaptive layer height settings
Wed, Dec 26, 7:58 PM
alexei committed rCT6d60c6834457: T3202: Add cross_support_density_image setting (authored by Tim Kuipers <t.kuipers@ultimaker.com>).
T3202: Add cross_support_density_image setting
Wed, Dec 26, 7:58 PM
alexei committed rCT069bb8686aae: T3202: Added support_fan_enable and support_supported_skin_fan_speed settings. (authored by Mark Burton <markb@smartavionics.com>).
T3202: Added support_fan_enable and support_supported_skin_fan_speed settings.
Wed, Dec 26, 7:58 PM
alexei committed rCT3042b3c0ecaf: T3202: added material_shrinkage_percentage setting (authored by Jack Ha <jackha@gmail.com>).
T3202: added material_shrinkage_percentage setting
Wed, Dec 26, 7:58 PM
alexei committed rCT45f385e1a688: T3202: Removed duplicate of bridge_wall_coast setting. (authored by alexei).
T3202: Removed duplicate of bridge_wall_coast setting.
Wed, Dec 26, 2:17 PM
alexei committed rCT25706fc961bb: T3202: support_wall_count setting (authored by Tim Kuipers <t.kuipers@ultimaker.com>).
T3202: support_wall_count setting
Wed, Dec 26, 2:02 PM
alexei committed rCTe00168a234af: T3202: setting to disable omitting retractions in support (authored by Tim Kuipers <t.kuipers@ultimaker.com>).
T3202: setting to disable omitting retractions in support
Wed, Dec 26, 2:02 PM