Page MenuHomeAleph Objects Inc
Feed Advanced Search

Today

Steven closed T4956: Change idler bolt side and insert side to be the tube clamp as Resolved.

This is now merged into master. FYI, this has all four screws accessible from the front of the tool head. This will be clarified in the insert diagrams: T4714

Tue, Jan 22, 2:04 PM · Quiver
Steven committed rTAZQUIVERf34fffa258b9: Merge branch 'master' into T4956 (authored by Steven).
Merge branch 'master' into T4956
Tue, Jan 22, 2:00 PM
Steven closed T5446: Extruder sensor harness servo 1 pinout 8 not 7 as Resolved.

The required are confirmed. This is now merged into master.

Tue, Jan 22, 1:25 PM · Quiver
Steven committed rTAZQUIVER396ab5ec3821: Merge branch 'master' into T5446 (authored by Steven).
Merge branch 'master' into T5446
Tue, Jan 22, 1:24 PM
Steven committed rTAZQUIVER444ee2becf2e: Merge branch 'master' into T5446 (authored by Steven).
Merge branch 'master' into T5446
Tue, Jan 22, 1:09 PM
Steven moved T5433: EL-HR0149 has image of 6 pin connector where 16 pin connector is used from Report Issues Here to Alpha Sprint (2019/01/04) on the Quiver board.
Tue, Jan 22, 1:02 PM · Quiver
Steven closed T5222: Remove hinge function from cap as Resolved.

This is now merged into master. @EricNugent FYI, I increased the revision number of the interface_board_mount to v1.2 in the merge. The file is the same as you reviewed but the file revision had not been incremented in the branch commits.

Tue, Jan 22, 12:11 PM · Quiver
Steven committed rTAZQUIVERde754c3869d1: Merge branch 'master' into T5222 (authored by Steven).
Merge branch 'master' into T5222
Tue, Jan 22, 12:09 PM
Steven moved T5014: Add TVS diode to bed extension harness EL-HR0146 from Needs Review to Alpha Sprint (2019/01/04) on the Quiver board.
Tue, Jan 22, 10:34 AM · Quiver
Steven closed T5206: Wire z max switch in parallel with second z max switch as Resolved.

This is now merged into master. @west @EricNugent FYI, I increased the revision number of vr_x_idler, Z_upper_left, and Z_upper_right because the versions in this branch matched the revision number already in master.

Tue, Jan 22, 10:32 AM · Quiver
Steven committed rTAZQUIVERe7c4be10bc6d: Merge branch 'master' into T5206 (authored by Steven).
Merge branch 'master' into T5206
Tue, Jan 22, 10:30 AM
Steven closed T5253: reduce LCD assembly free play to alleviate cosmetic concerns as Resolved.

This looks good and is now merged into master.

Tue, Jan 22, 10:14 AM · Quiver
Steven committed rTAZQUIVER8dd71a7e6248: Merge branch 'master' into T5253 (authored by Steven).
Merge branch 'master' into T5253
Tue, Jan 22, 10:12 AM
Steven closed T5315: EL-HR0166 heater pinout needs relabeled as Resolved.

This is now merged into master.

Tue, Jan 22, 10:06 AM · Quiver
Steven committed rTAZQUIVER9ffef0a3245e: Merge branch 'master' into T5315 (authored by Steven).
Merge branch 'master' into T5315
Tue, Jan 22, 10:05 AM
Steven closed T4638: Get new first articles of PC-BD0104 - Dual_Interface Rev. C and PC-BD0105 - USB_Reader_Rev_B Assembly as Resolved.

The new revs were received and are working well. Closing this out.

Tue, Jan 22, 10:01 AM · Quiver
Steven moved T5389: Y-chain pivot screw may need to be longer from Report Issues Here to Alpha Sprint (2019/01/04) on the Quiver board.
Tue, Jan 22, 6:32 AM · Quiver

Yesterday

Steven committed rTAZQUIVER3104d5f31613: Move KiCad_Files to electronics directory (authored by Steven).
Move KiCad_Files to electronics directory
Mon, Jan 21, 12:53 PM
Steven closed T5379: Update part number on EL-FA0036 as Resolved.

This is now merged into master.

Mon, Jan 21, 12:42 PM · Quiver
Steven committed rTAZQUIVER2b0b7b58cafc: Merge branch 'master' into T5379 (authored by Steven).
Merge branch 'master' into T5379
Mon, Jan 21, 12:41 PM
Steven closed T5316: Add PP-GP0432 bed mount chassis and remove pp-gp0223 bed mount chassis 3.3 as Resolved.

This is now merged into master.

Mon, Jan 21, 12:29 PM · Quiver
Steven committed rTAZQUIVER6d83ef6d0975: Merge branch 'master' into T5316 (authored by Steven).
Merge branch 'master' into T5316
Mon, Jan 21, 12:28 PM
Steven closed T5149: Order USB sticks with LulzBot Logo as Resolved.

This is now merge into master.

Mon, Jan 21, 12:24 PM · Quiver
Steven committed rTAZQUIVERe1bc7b258c8b: Merge branch 'master' into T5149 (authored by Steven).
Merge branch 'master' into T5149
Mon, Jan 21, 12:23 PM
Steven closed T4866: x bump stop doesnt sit flat against x motor as Resolved.

This is now merged into master. If we see the issue again in Beta we can reopen.

Mon, Jan 21, 12:21 PM · Quiver
Steven committed rTAZQUIVERd7681eec06b7: Merge branch 'master' into T4866 (authored by Steven).
Merge branch 'master' into T4866
Mon, Jan 21, 12:19 PM

Tue, Jan 15

Steven closed T4751: PP-MP0227 xy calibration cube Dimensional tolerance as Resolved.

Ok, this is now merged into master.

Tue, Jan 15, 3:54 PM · Quiver
Steven committed rTAZQUIVERf645d8b7d76d: Merge branch 'master' into T4751 (authored by Steven).
Merge branch 'master' into T4751
Tue, Jan 15, 3:53 PM
Steven closed T4962: Update Part number on HD-EX0093 as Resolved.

This is now merged to master.

Tue, Jan 15, 2:53 PM · Quiver
Steven committed rTAZQUIVERff4717659070: Merge branch 'master' into T4962 (authored by Steven).
Merge branch 'master' into T4962
Tue, Jan 15, 2:52 PM
Steven added a comment to T5283: Cold bootup, nozzle pushes into bed.

@jebba Quiver uses geared Z motors which hold the axis in place in most conditions. The Mini 2 is using standard motors which would drop axis more quickly without the break board. The shipping packaging would hold up the axis in shipping so the issue would largely be if the printer is transported after already assembled.

Tue, Jan 15, 12:26 PM · Marlin, Quiver
Steven added members for Aegir: karrad, adam.
Tue, Jan 15, 10:38 AM
Steven set the image for Aegir to F2896909: profile.
Tue, Jan 15, 10:36 AM
Steven changed the edit policy for Aegir.
Tue, Jan 15, 10:36 AM
Steven added a comment to T5253: reduce LCD assembly free play to alleviate cosmetic concerns.

@west @tutley it appears this is left outstanding.

Tue, Jan 15, 10:06 AM · Quiver
Steven committed rTAZQUIVER4643330f735d: Merge branch 'master' into T4861 (authored by Steven).
Merge branch 'master' into T4861
Tue, Jan 15, 9:37 AM
Steven committed rTAZQUIVEReab001f24bbb: Merge branch 'T4861' of ssh://code.alephobjects.com/diffusion/TAZQUIVER/taz… (authored by Steven).
Merge branch 'T4861' of ssh://code.alephobjects.com/diffusion/TAZQUIVER/taz…
Tue, Jan 15, 9:37 AM
Steven closed T4861: investigate a way to label feed tubes E1 and E2 as Resolved.

This is now merged to master.

Tue, Jan 15, 9:37 AM · Quiver
Steven added a comment to T3431: Find more reliable and manufacturable thermistor connector solution..

@tutley have we heard anything more from E3D on this? If not, can you please check in with them on this?

Tue, Jan 15, 8:17 AM · Quiver
Steven reassigned T3694: Make TAZ 7 Control Box test stand from Steven to mjpelletier.

@mjpelletier can you please work with @logan on this?

Tue, Jan 15, 8:14 AM · Quiver
Steven committed rTAZQUIVER94ba6d6fea2c: Merge branch 'master' into T4410 (authored by Steven).
Merge branch 'master' into T4410
Tue, Jan 15, 8:10 AM
Steven closed T4410: Tool head LulzBot logo plaque as Resolved.

@mcoronado we haven't found off the shelf sheet adhesives that would work reliably on a 3D printed part. There are paste adhesives we could look into that would very likely work but those are generally a nightmare in production as they are hard to control and have waste and air quality concerns. I'm going to merge this in to move forward to get Betas started. We can open another ticket in Betas if needed but I think we should stick with the hardware.

Tue, Jan 15, 8:10 AM · Quiver
Steven added a comment to T4962: Update Part number on HD-EX0093.

@west ^

Tue, Jan 15, 7:44 AM · Quiver
Steven assigned T4751: PP-MP0227 xy calibration cube Dimensional tolerance to west.

@west can you please make the changes recommended above so this can get to review and merge?

Tue, Jan 15, 7:41 AM · Quiver

Mon, Jan 14

Steven closed T4979: Dust build up on electronics as Wontfix.

I don't see adding a filter at this point in the project but it would be worth adding to a usage and maintenance page to clean out the enclosure if working in a dusty environment. -> T3984

Mon, Jan 14, 1:42 PM · Quiver
Steven moved T5253: reduce LCD assembly free play to alleviate cosmetic concerns from Report Issues Here to Alpha Sprint (2019/01/04) on the Quiver board.
Mon, Jan 14, 1:38 PM · Quiver
Steven added a comment to T4751: PP-MP0227 xy calibration cube Dimensional tolerance.

@oliver do you agree to the recommendation given by @samantha? We need to get this modified in a branch and reviewed.

Mon, Jan 14, 1:35 PM · Quiver
Steven closed T5047: TAZ 7 Quiver Drop Test as Invalid.

The issues associated with this are being worked in other tickets, T5088 and T5071, and a new rev of the packaging materials is in process. Closing this out as there is nothing specifically actionable in this ticket.

Mon, Jan 14, 1:31 PM · Quiver
Steven moved T4962: Update Part number on HD-EX0093 from Alpha Sprint (2019/01/04) to Needs Review on the Quiver board.

Ok, the UoM and length is updated in the BoM now. This does not include the length that will be needed for T5206 as that should be added in that change and branch. @kent can you please review this and merge?

Mon, Jan 14, 1:28 PM · Quiver
Steven committed rTAZQUIVER403392116d47: Merge branch 'master' into T4962 (authored by Steven).
Merge branch 'master' into T4962
Mon, Jan 14, 1:27 PM
Steven committed rTAZQUIVER5fc6cf462fa1: Merge branch 'master' into T4962 (authored by Steven).
Merge branch 'master' into T4962
Mon, Jan 14, 1:27 PM
Steven committed rTAZQUIVER5c40ec6c8690: Correct HD-EX0093 UoM and qty (authored by Steven).
Correct HD-EX0093 UoM and qty
Mon, Jan 14, 1:27 PM
Steven reopened T3841: Tool head hot warning plaque as "Open".

I think this still has BOM changes that need to be merged over. @DaniAO @west is the BOM ready with the correct parts in this branch.

Mon, Jan 14, 12:27 PM · Quiver
Steven closed T5294: Need Part number for cable channel as Resolved.

This is good and is now merged to master.

Mon, Jan 14, 12:22 PM · Quiver
Steven closed T3607: Half frame assembly jig as Resolved.

This is now merged into master.

Mon, Jan 14, 9:29 AM · Quiver
Steven committed rTAZQUIVER9f9d3b3b3d8d: Merge branch 'master' into T3607 (authored by Steven).
Merge branch 'master' into T3607
Mon, Jan 14, 9:27 AM
Steven added a comment to T4962: Update Part number on HD-EX0093.

@DaniAO I don't see that HD-EX0093 has any purchases on it. Was it purchased under a different product? If not and we're going to use HD-EX0093, the product name shouldn't include 285mm.

Mon, Jan 14, 8:51 AM · Quiver
Steven committed rTAZQUIVER286d1f6b3e36: Merge branch 'master' into T5276 (authored by Steven).
Merge branch 'master' into T5276
Mon, Jan 14, 8:22 AM
Steven committed rTAZQUIVER82f1499063f2: Merge branch 'master' into T5276 (authored by Steven).
Merge branch 'master' into T5276
Mon, Jan 14, 8:21 AM
Steven closed T4723: M5 insert hole in Y-Corners too large as Resolved.

This is fixed and now merged into master.

Mon, Jan 14, 8:18 AM · Quiver
Steven committed rTAZQUIVERa15e7aa7a9d8: Add revision number to file names of revised y corners (authored by Steven).
Add revision number to file names of revised y corners
Mon, Jan 14, 8:16 AM
Steven committed rTAZQUIVER4a13f7785e18: Merge branch 'master' into T4723 (authored by Steven).
Merge branch 'master' into T4723
Mon, Jan 14, 8:10 AM
Steven committed rTAZQUIVER452f7a45b2f3: Replace HD-MS0060 with HD-MS0158 on BoM (authored by Steven).
Replace HD-MS0060 with HD-MS0158 on BoM
Mon, Jan 14, 8:09 AM
Steven added a project to T5283: Cold bootup, nozzle pushes into bed: Marlin.
Mon, Jan 14, 7:54 AM · Marlin, Quiver

Fri, Jan 11

Steven closed T4911: Tool head runs into frame during probe as Resolved.

This is now merged to master. @west FYI, the part didn't have a rev number up so I committed that change in master after the merge.

Fri, Jan 11, 1:00 PM · Quiver
Steven committed rTAZQUIVER9b726cbf9d83: Rev x_idler version missed in T4911 (authored by Steven).
Rev x_idler version missed in T4911
Fri, Jan 11, 12:59 PM
Steven committed rTAZQUIVER8864bb4a23a1: Merge branch 'master' into T4911 (authored by Steven).
Merge branch 'master' into T4911
Fri, Jan 11, 12:56 PM
Steven added a comment to T5122: actuator end profile changing.

@tutley or @samantha can you please review the merged duplicate rev B changes from Kent so we can close this one out?

Fri, Jan 11, 12:46 PM · Quiver
Steven closed T4819: Interconnect housing adjustments as Resolved.

@MikeR thanks! This is now merged into master.

Fri, Jan 11, 12:44 PM · Quiver
Steven committed rTAZQUIVER21e7d7672d58: Merge branch 'master' into T4819 (authored by Steven).
Merge branch 'master' into T4819
Fri, Jan 11, 12:43 PM
Steven closed T4732: EL-HR0155 Documentation Quantity Error as Resolved.

lol, looks like this was added back with another merge :P

Fri, Jan 11, 12:35 PM · Quiver
Steven added a comment to T5073: False positive reading from filament sensor.

@MikeR what was the runout detection setting used in this print? Can you try turning the runout detection higher and test again? I wonder if we shouldn't make this setting defined in profiles as flexible materials may require a higher threshold.

Fri, Jan 11, 9:44 AM · Quiver

Thu, Jan 10

Steven closed T4728: Research current Open Hardware hot ends and extruders as Resolved.

Ok, going to close this out as we're pretty certain we're going to have to do something in house.

Thu, Jan 10, 1:51 PM · Brizo
Steven closed T4510: Finalize tool head cable strain relief as Resolved.

This is completed with T4864

Thu, Jan 10, 1:43 PM · Quiver
Steven closed T4518: Use off the shelf part for cable tie down, a subtask of T4510: Finalize tool head cable strain relief, as Wontfix.
Thu, Jan 10, 1:43 PM · Quiver
Steven closed T4518: Use off the shelf part for cable tie down as Wontfix.

This is no longer needed with the changes in T4864.

Thu, Jan 10, 1:43 PM · Quiver
Steven updated subscribers of T4819: Interconnect housing adjustments.

@EricNugent @MikeR the Alpha changes doc shows this was test on one machine in MER. Can this be installed on another machine and confirmed if good?

Thu, Jan 10, 12:16 PM · Quiver
Steven closed T4841: Make frame feet round instead of square as Resolved.

This is now merged into master.

Thu, Jan 10, 12:11 PM · Quiver
Steven committed rTAZQUIVER4292ba07aa08: Merge branch 'master' into T4841 (authored by Steven).
Merge branch 'master' into T4841
Thu, Jan 10, 12:11 PM
Steven added a comment to T4736: create GP reference for cluster.

@west ok, let's get all of the printed part changes completed in merged in but it would be good to have this merged in before the Beta tag.

Thu, Jan 10, 12:01 PM · Quiver
Steven closed T4922: extruder blower sucking in heat bed air as Wontfix.

Closing this out. Please reopen if we see irreconcilable issues with profiles through Betas.

Thu, Jan 10, 12:00 PM · Quiver
Steven closed T5027: Sensor wires difficult to route to sensor board as Resolved.

This is now merged into master.

Thu, Jan 10, 11:58 AM · Quiver
Steven committed rTAZQUIVERd872a8b71c8f: Merge branch 'master' into T5027 (authored by Steven).
Merge branch 'master' into T5027
Thu, Jan 10, 11:58 AM
Steven updated subscribers of T4841: Make frame feet round instead of square.

@EricNugent or @MikeR any issues with printing and install of these new feet?

Thu, Jan 10, 11:39 AM · Quiver
Steven closed T4872: Add washer to pivot spring as Resolved.

This is now merged into master. Heads up @DaniAO and @logan

Thu, Jan 10, 11:34 AM · Quiver
Steven committed rTAZQUIVER52e795895a57: Merge branch 'master' into T4872 (authored by Steven).
Merge branch 'master' into T4872
Thu, Jan 10, 11:34 AM
Steven closed T4815: archim pinout drawing changes as Resolved.

This is now merged into master.

Thu, Jan 10, 11:29 AM · Quiver
Steven committed rTAZQUIVERf4966c991e2d: Merge branch 'master' into T4815 (authored by Steven).
Merge branch 'master' into T4815
Thu, Jan 10, 11:29 AM
Steven moved T5143: Update chassis drawing and model to reflect requested changed by vendor from Needs Review to Beta Sprint on the Quiver board.

@west @samantha these changes look good. I'm moving this to the Beta work board. We'll want to wait to merge this in after the Beta tag is done as we will not have this design for the Beta builds.

Thu, Jan 10, 11:26 AM · Quiver
Steven closed T4938: Add Caution Hot Tag to BoM as Resolved.

@DaniAO this is now merged to master.

Thu, Jan 10, 11:16 AM · Quiver
Steven committed rTAZQUIVERa2b6afc61ce3: Merge branch 'master' into T4938 (authored by Steven).
Merge branch 'master' into T4938
Thu, Jan 10, 11:15 AM
Steven closed T4937: Add Toolhead tag part number to BoM as Resolved.

@DaniAO this is merged into master now.

Thu, Jan 10, 11:02 AM · Quiver
Steven committed rTAZQUIVERc3e51be3eccd: Merge branch 'master' into T4937 (authored by Steven).
Merge branch 'master' into T4937
Thu, Jan 10, 11:01 AM
Steven added a comment to T4962: Update Part number on HD-EX0093.

@west @dani I think we should make the drawing in case we ever need the cut process out sourced.

Thu, Jan 10, 10:58 AM · Quiver
Steven closed T4830: Determine Y-axis belt tensions as Resolved.

This is now merged into master.

Thu, Jan 10, 10:56 AM · Quiver
Steven committed rTAZQUIVER1852df379b2b: Merge branch 'master' into T4830 (authored by Steven).
Merge branch 'master' into T4830
Thu, Jan 10, 10:56 AM
Steven closed T4856: Blower shroud hits wiper mounts on first layer. as Resolved.

Ok, this is now merged into master.

Thu, Jan 10, 10:50 AM · Quiver
Steven committed rTAZQUIVER335a311819a4: Merge branch 'master' into T4856 (authored by Steven).
Merge branch 'master' into T4856
Thu, Jan 10, 10:49 AM
Steven updated subscribers of T4856: Blower shroud hits wiper mounts on first layer..

@EricNugent @MikeR can one of you confirm if the changes to the wiper pad mount here fixed the issues you were seeing?

Thu, Jan 10, 7:22 AM · Quiver
Steven closed T4865: Remove ridge on top of y pivot mount for easier print orientation as Resolved.

This is now merged into master.

Thu, Jan 10, 7:18 AM · Quiver