Yes, lets stick with what we are already doing - clear bag and printed, in-house label.

After some more testing with 3.6.15 firmware and profiles, I feel the PA-CF profile is dialed in enough to send to a reviewer. The results are as good as I have gotten from a 0.5mm nozzle.

My favorite of the samples @DaniAO shared with me is the SM-9947. I'd like to get a few samples and see what they look like. If we don't have time, or need a different size/shape I'm fine with using the current green bags for the product launch.

@Steven Sounds good, we will take a look.

I have done this a few times now, and it seems like the key to switching from PA-CF is to always crank the heat way up. Even if the PA-CF has been sitting in the nozzle, turning up the temp to 275 seems to be enough to successfully switch back to PLA.

I've run two prints with PA-CF. Both were done with dry filament, Cura 3.6.11 firmware, and the T8010 profiles:

I flashed .134 on my production quiver. The nozzles wipe in the correct location, and calibration was a success. This is the most successful print I've done.

I have no preference on the type or color of screws. Function over form is fine here.

I've had some issues with nozzles getting clogged when printing with the Polycast. I have had two TAZ Aerostruders, one one Mini SE tool head get clogged after completing prints and letting the nozzles cool.

I am getting good results using the standard PolyLite PLA profile.

@Steven this was straight out of the packaging, but it didn't have any of the signs of moisture Adam warned me to look for. No popping sounds or steam.

Sorry, this was high speed.

First print with Banded Tiger and X Strand filament resulted in poor print quality:

While this isn't exactly my area of expertise, I'd love to be involved. Incorporating the printer sounds into video transitions was a huge hit, and I'd love to recreate that magic with future hardware. These little touches do a lot for brand recognition, especially as the hardware itself gets quieter and quieter. My rice cooker sings twinkle twinkle little star and I absolutely love it :)

Attribution:

Staged on YT:

@eBeardslee sounds good to me:

Thumbnail options:

Rough Draft 2:

Product Video Rough Draft 1:

@kenhara Will do!

/home/aleph/shared-j/Documents/Creative/Video/Achemon_Sphinx/SLA_Campaign/Copy/Achemon_Sphinx_SLA_Campaign.odt

Playing with some potential copy for the short, teaser content:

@kenhara @adam I feel pretty confident we have some film tricks that will work quite well for showing off the results as is. The lines are so faint I don't see too much of a need to show the vapor smoothing.

Sorry, got my tickets mixed up...

The pause functionality seems to work, but there is still no resume button:

I'm using a mini, and I just flashed the firmware today, so it should be the most recent version.

Using 2.6.34 version of Cura2