Page MenuHomeAleph Objects Inc

MichaelM (Michael McCloud)
User

Projects

User Details

User Since
Jul 31 2018, 8:19 AM (46 w, 16 h)

Recent Activity

Yesterday

MichaelM added a comment to T7989: Taz Pro tool Head BOM change.

Ok. Thanks!

Tue, Jun 18, 12:28 PM · Quiver
MichaelM added a comment to T7654: Under extrusion from toolhead?.

I still have the first one you sent back to us at Rockies. MER told me to just hold onto it for now so we will just be sitting on that one too. Just an FYI

Tue, Jun 18, 11:56 AM · Quiver
MichaelM added a comment to T7989: Taz Pro tool Head BOM change.

no it is not. It is a OCA BoM change for (AS-TH0074). We are talking about (PP-IS0081) on that other ticket.

Tue, Jun 18, 11:55 AM · Quiver
MichaelM added a comment to T7988: Serial Number stickers for retail.

@DaniAO yes I am asking to get the small u-line sticker the we use for serial numbers to be added to the boxing BOM for Mini 2. And yes we do put serial numbers on Taz 6 tool heads for retail

Tue, Jun 18, 8:12 AM · Cecropia Silk
MichaelM added a comment to T7784: Taz Pro Tool head Ohai.

Hey guys. So can we get the OHAI updated and get the (PP-IS0081) removed off of the first half of the build?

Tue, Jun 18, 7:27 AM · Quiver, Assembly Instruction Content Request

Mon, Jun 17

MichaelM created T7990: Taz Pro OHAI update.
Mon, Jun 17, 3:30 PM · Quiver
MichaelM triaged T7989: Taz Pro tool Head BOM change as Normal priority.
Mon, Jun 17, 3:27 PM · Quiver
MichaelM triaged T7988: Serial Number stickers for retail as Normal priority.
Mon, Jun 17, 3:23 PM · Cecropia Silk

Thu, Jun 13

MichaelM triaged T7852: Taz Pro tool head test stand. as High priority.
Thu, Jun 13, 8:34 AM · Restricted Project

Wed, Jun 12

MichaelM added a comment to T7844: Top rod mounts.

The one on the left is good and the one on the right is the NC part.

Wed, Jun 12, 5:01 PM · Quiver
MichaelM added a comment to T7844: Top rod mounts.
Wed, Jun 12, 4:54 PM · Quiver
MichaelM added a comment to T7844: Top rod mounts.

Ok. thank you for looking into this. We will just wait to hear a final verdict.

Wed, Jun 12, 1:51 PM · Quiver
MichaelM added a comment to T7844: Top rod mounts.

because of the finish on the part. Quattro said that there was some metal debris stuck in the tumbler and it caused this cosmetic issue

Wed, Jun 12, 1:12 PM · Quiver
MichaelM triaged T7844: Top rod mounts as High priority.
Wed, Jun 12, 12:50 PM · Quiver

Tue, Jun 11

MichaelM added a comment to T7784: Taz Pro Tool head Ohai.

@EricNugent moving the idler clamps isn't a big deal. But the Actuator cover does cause some issues. It makes it difficult when you are putting the motors onto the motor mounts, and we would have to do a BOM change. The actuator cover is on the BOM for the second half of the build (AS-TH0074) . If we put it on then we would have to add it to the BOM for the first half build (AS-TH0073).

Tue, Jun 11, 2:25 PM · Quiver, Assembly Instruction Content Request
MichaelM added a comment to T7784: Taz Pro Tool head Ohai.

@MikeR We have always put that part on close to the end. The BOM for the final build (AS-TH0074) has always had (PP-ISOO81) on it. And the OHAI has definitely changed. Some things are in different order, for example the idler clamps (PP-IS0082) & (PP-IS0083) are put on in a different spot now too.

Tue, Jun 11, 1:57 PM · Quiver, Assembly Instruction Content Request
MichaelM triaged T7786: tool head cable channel torque specs as Normal priority.
Tue, Jun 11, 10:45 AM · Quiver, Assembly Instruction Content Request
MichaelM triaged T7784: Taz Pro Tool head Ohai as Normal priority.
Tue, Jun 11, 10:38 AM · Quiver, Assembly Instruction Content Request

Wed, May 29

MichaelM triaged T7507: Redgum tool head OHAI instructions as Normal priority.
Wed, May 29, 10:45 AM · Redgum, Assembly Instruction Content Request
MichaelM triaged T7503: Redgum tool head as Normal priority.
Wed, May 29, 10:39 AM · Redgum, Assembly Instruction Content Request
MichaelM added a project to T7486: Taz 6 Tool Head Update: TAZ 6.
Wed, May 29, 8:10 AM · TAZ 6, Assembly Instruction Content Request
MichaelM triaged T7486: Taz 6 Tool Head Update as Normal priority.
Wed, May 29, 8:10 AM · TAZ 6, Assembly Instruction Content Request

Tue, May 28

MichaelM added a comment to T7464: Tool Heads test stand.

Never mind. false alarm, It was a tool head making the LCD not come on. We took the trouble tool head off the test stand and replaced it with a good one and now the test stand works fine.

Tue, May 28, 8:15 AM · Restricted Project
MichaelM triaged T7464: Tool Heads test stand as High priority.
Tue, May 28, 8:04 AM · Restricted Project

Wed, May 22

MichaelM triaged T7433: Taz Pro tool head OHAI as Normal priority.
Wed, May 22, 10:40 AM · Quiver, Assembly Instruction Content Request
MichaelM added a comment to T6905: Insert breaking in extruder body.

We have not seen any more returned to us for that reason in Tool Heads.

Wed, May 22, 9:44 AM · Quiver

May 8 2019

MichaelM created T7103: Taz Pro Tool head.
May 8 2019, 7:33 AM · Assembly Instruction Content Request, Quiver

May 1 2019

MichaelM added a comment to T3612: Make quiver dual test stand and gcode.

yay! thank you sir!

May 1 2019, 11:23 AM · Quiver

Apr 29 2019

MichaelM added a comment to T6848: qa records for toolhead and filament runout sensor.

I am on board with putting the QA sheets in a sleeve or something when the tool heads are transported and tagging them so the assemblers know which tool head they go to. But my only concern is do we want to write our own internal notes on something we are giving to the customer. I just worry that our scribble on the QA sheet might not look very professional.

Apr 29 2019, 2:41 PM · Quiver

Apr 23 2019

MichaelM updated the task description for T6775: Quiver toolhead BOM change.
Apr 23 2019, 10:49 AM · Quiver
MichaelM created T6775: Quiver toolhead BOM change.
Apr 23 2019, 10:48 AM · Quiver

Apr 9 2019

MichaelM created T6567: Titan HS extruder OHAI .
Apr 9 2019, 11:31 AM · Assembly Instruction Content Request
MichaelM created T6565: Taz Pro insert BOM change.
Apr 9 2019, 10:50 AM · Quiver, Assembly Instruction Content Request
MichaelM created T6564: Taz Pro extruder OHAI.
Apr 9 2019, 10:46 AM · Quiver, Assembly Instruction Content Request

Mar 28 2019

MichaelM triaged T6426: New tool for Taz x-end station as Normal priority.
Mar 28 2019, 4:38 PM · Restricted Project

Mar 8 2019

MichaelM created T6067: MOARstruder Ohai.
Mar 8 2019, 8:52 AM · Assembly Instruction Content Request

Feb 11 2019

MichaelM triaged T5673: Mini 1.04 Extruder assembly as Normal priority.
Feb 11 2019, 2:22 PM · Assembly Instruction Content Request

Dec 27 2018

MichaelM added a comment to T3431: Find more reliable and manufacturable thermistor connector solution..

I would like to add that we are seeing a lot of fallout of the E3D thermistors in the tool head building process. The thermistors seem to be breaking at the pins/ pin housing. One of my assemblers has had 5 break in the past two days. Another one of my assemblers has 5 fall out so far out of an order of 20 today. here are some examples of what we are running into.

Dec 27 2018, 11:41 AM · Quiver

Nov 8 2018

MichaelM added a comment to T2548: AS-HE0031 MOAR hotend subassembly.

@franklin thank you for adding the E-Step calibration to the final step of the OHAI. It all looks good to me now.

Nov 8 2018, 2:50 PM · Assembly Instruction Content Request
MichaelM added a comment to T3643: Dingy Production OHAI.

@kforrest the OHAI looks good but there are a few things that we noticed that could use a change. On Step 6, the chart for matching up nozzle sizes, is not the correct chart. It needs to have the Volcano tip chart. The chart that is up there now does not work with the H.S.+ nozzle. Also on Step 10, when putting on the blower shroud. It is easier if you put the blower shroud in place before putting in the bolt for the ground wire. Instead of putting the ground wire down first and then putting the blower shroud on. Then on the boxing portion the BOM calls for (RM-PE0015), a petg fillament sample, instead of the (AS-PK0031). And it also needs to include the (AS-PK0010), (PP-GP0398), (SH-PG0030), and the (TL-CS0255). Thank you!
-Michael M.

Nov 8 2018, 11:48 AM · Assembly Instruction Content Request, Dingy Cutworm(1.2mm)
MichaelM added a comment to T3642: Banded Production OHAI.

@kforrest the OHAI looks good but there are a few things that we noticed that could use a change. On Step 6, the chart for matching up nozzle sizes, is not the correct chart. It needs to have the Volcano tip chart. the chart that is up there now does not work with the H.S. nozzle. Also on Step 10, when putting on the blower shroud. It is easier if you put the blower shroud in place before putting in the bolt for the ground wire. Instead of putting the ground wire down first and then putting the blower shroud on. Then on the boxing portion we use (RM-PE0015), a petg fillament sample, instead of the (AS-PK0031). And it also needs to include the (AS-PK0010), (PP-GP0398), (SH-PG0030), and the (TL-CS0255). Thank you!
-Michael M.

Nov 8 2018, 11:46 AM · Assembly Instruction Content Request, Banded Tiger

Nov 6 2018

MichaelM added a comment to T2548: AS-HE0031 MOAR hotend subassembly.

Hey @franklin . Thank you for taking the time to re-due that OHAI, It looks great! The only thing I would add is at the end on the very last step. If we could just add a note (on the very last step) to put on the serialized E-step sticker and to do the 300mm spit test. Then I think we will be golden!

Nov 6 2018, 10:12 AM · Assembly Instruction Content Request

Sep 27 2018

MichaelM updated subscribers of T3754: Build beta units for Banded Tiger.

I have received the the hot ends and have begun the process to build the tool head. @adam i just need to know what kind of filament we are using for the spit test for Banded Tiger.
and @logan is going to make us a G code for it.

Sep 27 2018, 1:31 PM · Banded Tiger
MichaelM updated subscribers of T3755: Build beta units for Dingy Cutworm.

I have received the the hot ends and have begun the process to build the tool head. @adam i just need to know what kind of filament we are using for the spit test for Dingy Cutworm.
and @logan is going to make us a G code for it.

Sep 27 2018, 1:31 PM · Dingy Cutworm(1.2mm)

Sep 26 2018

MichaelM added a comment to T3755: Build beta units for Dingy Cutworm.

I have received the raw parts to insert for the beta build. I will get them inserted and hold into them until we receive the hobbed bolt.

Sep 26 2018, 11:38 AM · Dingy Cutworm(1.2mm)
MichaelM added a comment to T3754: Build beta units for Banded Tiger.

I have received the raw parts to insert for the beta build. I will get them inserted and hold into them until we receive the hobbed bolt.

Sep 26 2018, 11:38 AM · Banded Tiger

Sep 18 2018

MichaelM created T3669: Taz 6 and Taz Aero extruder OHAI.
Sep 18 2018, 3:37 PM · Assembly Instruction Content Request
MichaelM added a comment to T2548: AS-HE0031 MOAR hotend subassembly.

yes please! @franklin if there is anything I can do to help this process through please let me know.

Sep 18 2018, 3:21 PM · Assembly Instruction Content Request