- User Since
- Mar 20 2018, 11:17 AM (77 w, 5 d)
Mon, Sep 9
We will go through the EL-HR0153 harnesses that are already build to make sure they are build correctly we will do 100% QC on them and the purple erase switch from step 19 in the OHAI we will be vigilant to make sure it is plug .The tester does not test for this switch.
Wed, Aug 28
We have started using the cables from CCX but we will watch out for this wire harness so far we have not found one internal extruder harness that was wire wrong but we will continue to be vigilant.
Jul 17 2019
we have installed the AS-PR0169 into the 15 Workhorse chassis here at Rockies they will have 2 yellow tags to indentify them saying they have fuses when they come to Mountain and now we are waiting for Fuses to be able to proceed with this change.Thank you all for the team work this change went really smooth.
Jul 10 2019
Maybe we could cut the Braided sleeving 20 mm and push the heatshrink up to the 15mm standard to the connector or maybe the slots in the interconnector could be enlarged to fit the braided sleeve maybe this could help
Jun 26 2019
Thank you for this Info we will verify for the bloom this last delivery of PP-IS0086 was a lot better on the inserts except 25 of them but we took the bloom off.Thank you West for the info on the longer screws.
We have seen one control box with this Bright Spot issue and have come to Learn that when their is a plastic bloom on PP-IS0086 Touch screen with inserts it will cause this spot so we are also taking off the excess plastic when we put the
HD-BT0234 screw to hold the PC-BD108. Maybe a shorter screw HD-BT0104 which is an M3x8 will prevent this cause HD-BT0234 is M3x10 is a little bit longer.