Page MenuHomeAleph Objects Inc

jperry (Josh Perry)
User

Projects

User Details

User Since
Oct 24 2018, 2:07 PM (58 w, 2 d)

Recent Activity

Aug 7 2019

jperry closed T9478: Part numbers for front and back labels, a subtask of T8912: Retail Label - HE Tool head, as Resolved.
Aug 7 2019, 1:32 PM · Retail Parts
jperry closed T9478: Part numbers for front and back labels as Resolved.
Aug 7 2019, 1:32 PM · Retail Parts
jperry added a comment to T9478: Part numbers for front and back labels.

I've created the following parts:

Aug 7 2019, 1:32 PM · Retail Parts
jperry added a comment to T9472: Part number was not created for M2.5x14mm screw.

I have created part HD-BT0255 for this.

Aug 7 2019, 9:40 AM · kangaroo-paw

Aug 6 2019

jperry added a comment to T8384: Initial order of new NinjaFlex sizes.

I've attached the UPC Code list to this ticket.

Aug 6 2019, 2:29 PM · Filament

Aug 5 2019

jperry added a comment to T8533: AS-CB0075 rev in filename doesn't match rev on drawing.

The drawing has been updated for AS-CB0075 but has not been signed off on yet.

Aug 5 2019, 9:42 AM · Mini-Hibiscus

Aug 2 2019

jperry added a comment to T9150: EL-MS0380 Cable Chain for Pro X-Axis Harness.

I've created part HD-CB0001 for the base unit we order from Igus. These come with 100 total links in the chain. I've also created KT-HR0008 for the kit. Let me know if you would like to see any changes.

Aug 2 2019, 2:07 PM · Retail Parts
jperry added a comment to T7529: PP-MP0205 E3D Aero Steel Pinion Gear - Issue - Set Screw Hole Location.

I've updated part PP-MP0205 to have CC-AO-TITAN-GEAR-SMALL-300 and PP-MP0282 to have CC-AO-TITAN-GEAR-SMALL-250. I also updated PP-MP0282 to have the link to the parent directory. The link is https://devel.lulzbot.com/TAZ/accessories/yellowfin/production_parts/machined_parts/pinion/.

Aug 2 2019, 9:01 AM · Yellowfin

Aug 1 2019

jperry added a comment to T9252: Make drawing for bed standoff.

Here is the drawing.

Aug 1 2019, 9:09 AM · Redgum

Jul 31 2019

jperry added a comment to T9221: Obsolete Diode.

One helpful tool I use is findchips.com. Just type in the manufacturers part number and it will give you a list of vendors.

Jul 31 2019, 3:46 PM · Quiver, Redgum

Jul 29 2019

jperry added a comment to T8383: NinjaFlex - create new part numbers.

I have reached out to Fenner Drives to get this info.

Jul 29 2019, 9:53 AM · Filament

Jul 26 2019

jperry added a comment to T8909: OCA Entry - HE Tool head.

The stock buffers have been created for Retail and the 4 Ship Wire locations. Let me know if you have any questions.

Jul 26 2019, 11:42 AM · Retail Parts

Jul 25 2019

jperry added a comment to T9053: Re-Ordering Rules-LulzBot TAZ PRO/WE ABS+ Enclosure by Printed Solid-KT-MS0014.

I've setup 5 buffer stock locations and set the lead time at 21 days. Please let me know the actual lead time so I can update the buffers with accurate information.

Jul 25 2019, 9:18 AM · Retail Parts

Jul 24 2019

jperry added a comment to T8478: Box Artwork.

I have sent quote requests to both Preferred Packaging as well as UPC. I will update this ticket with the quotes.

Jul 24 2019, 11:18 AM · kangaroo-paw

Jul 22 2019

jperry added a comment to T8503: update bed plate to include the caution hot symbol.

The files have been sent. I've contacted Epocs again to verify they have received the updated drawings.

Jul 22 2019, 2:21 PM · kangaroo-paw
jperry added a comment to T7359: OSHWA Certification Redgum.

Yes we should be good to close this out.

Jul 22 2019, 12:52 PM · Redgum

Jul 17 2019

jperry added a comment to T7529: PP-MP0205 E3D Aero Steel Pinion Gear - Issue - Set Screw Hole Location.

The file path is below. I've also logged this path in the product card for part PP-MP0282.

Jul 17 2019, 11:58 AM · Yellowfin

Jul 16 2019

jperry added a comment to T6683: White screws.

I've created the following part numbers for the stainless steel hardware.

Jul 16 2019, 4:10 PM · kangaroo-paw
jperry added a comment to T6784: verify new chassis sheet metal .

Below is the update PMM sent me yesterday. The covers are done but they had an over spray issue on the chassis,

Jul 16 2019, 9:00 AM · Redgum

Jul 15 2019

jperry added a comment to T8533: AS-CB0075 rev in filename doesn't match rev on drawing.

I'd prefer to have the Rev letter in the actual file name. We have instances in the past were the file name had a different rev letter than the file and this caused some confusion for our vendors.

Jul 15 2019, 8:18 AM · Mini-Hibiscus

Jul 12 2019

jperry added a comment to T6683: White screws.

@DaniAO I have not ordered any samples yet. Stainless steel versions are 2 week lead time from Hardware Specialty and 1 day from Mcmaster-Carr.

Jul 12 2019, 2:35 PM · kangaroo-paw
jperry added a comment to T6683: White screws.

Here are the updated quotes for the Blue-Dyed version of the hardware. Lead times on these parts is 5 weeks. Total cost of the Blue-Dyed parts is $4.96 while stainless steel total cost is $1.076.

Jul 12 2019, 1:57 PM · kangaroo-paw

Jul 10 2019

jperry added a comment to T6683: White screws.

I found the following items through McMaster-Carr. I'm having Hardware Specialties quote both stainless steel and blue-dyed versions.

Jul 10 2019, 4:17 PM · kangaroo-paw
jperry added a comment to T7359: OSHWA Certification Redgum.

I notified Preferred Packaging and sent them the new files located at home/aleph/shared-j/Documents/Creative/Print/Packaging/Quiver_Box/Ready/

Jul 10 2019, 11:05 AM · Redgum
jperry added a comment to T7985: Cert label.

Below is the response from EIM. We need to decide on whether we want a tamper-evident label or if the chemical resistant label as it is one or the other at this point. I can also look for some other suppliers in the meantime.

Jul 10 2019, 9:12 AM · kangaroo-paw

Jul 9 2019

jperry created T8549: Kangaroo Paw Toolhead Milled Parts for Alpha.
Jul 9 2019, 11:58 AM · Restricted Project
jperry added a comment to T7529: PP-MP0205 E3D Aero Steel Pinion Gear - Issue - Set Screw Hole Location.

I created a change order under T8547

Jul 9 2019, 10:44 AM · Yellowfin
jperry added a comment to T7985: Cert label.

I sent an email to EIM and copied both @DaniAO and @tutley .

Jul 9 2019, 10:19 AM · kangaroo-paw

Jul 8 2019

jperry added a comment to T8503: update bed plate to include the caution hot symbol.

We currently have an FA order on hold with Epocs awaiting some drawing updates. Once Kent updates the drawings for the other two items I will reload the repo and make sure Epocs has the most recent revs. of each part.

Jul 8 2019, 2:40 PM · kangaroo-paw
jperry added a comment to T7529: PP-MP0205 E3D Aero Steel Pinion Gear - Issue - Set Screw Hole Location.

The new part PP-MP0282 is for the V3 version only

Jul 8 2019, 9:59 AM · Yellowfin

Jul 5 2019

jperry added a comment to T7529: PP-MP0205 E3D Aero Steel Pinion Gear - Issue - Set Screw Hole Location.

I've created part PP-MP0282: E3D, V3 Aero Steel Pinion Gear w/ Set Screw. We will need to update AS-TH0055 BOM to have this part instead of the PP-MP0205.

Jul 5 2019, 9:25 AM · Yellowfin

Jul 3 2019

jperry added a comment to T8477: Change etching on bed heater.

It is usually 8-12 weeks from Tempco.

Jul 3 2019, 3:17 PM · kangaroo-paw
jperry added a comment to T8427: Need cable harness part numbers.

I created the following parts

Jul 3 2019, 12:02 PM · kangaroo-paw
jperry added a comment to T7849: Electronics case silk screen.

I have 15 units on order with Epocs with a delivery date of 7/21. They did find two issues with our drawings that Kent is working on and said he will have completed by the end of the week. I also touched base with PMM on getting some of our FA metal reworked. Maureen at PMM said these RMA's are 4-5 days out.

Jul 3 2019, 10:04 AM · kangaroo-paw
jperry added a comment to T7630: FInal MO for non-etched Beds.

Yes we have the new version on order and will have some delivered later this month.

Jul 3 2019, 8:37 AM · Retail Parts

Jul 2 2019

jperry added a comment to T6784: verify new chassis sheet metal .

I got a hold of PMM and it looks like the initial run was rejected by their QC due to overspray on the inside of the chassis. They currently have more in process and they said they are 8 working days out.

Jul 2 2019, 11:44 AM · Redgum
jperry added a comment to T6784: verify new chassis sheet metal .

PMM said they were going to deliver this week but they haven't confirmed yet. I will call them today.

Jul 2 2019, 8:59 AM · Redgum

Jul 1 2019

jperry added a comment to T8383: NinjaFlex - create new part numbers.

I made the following parts. We still need to update the UPC codes as well as the sales price.

Jul 1 2019, 10:15 AM · Filament
jperry updated subscribers of T8301: Update Tool Head Sticker.

I ordered 750 of the new label on PO32228. I've also requested @tomc to scrap the old labels and adjust them out of inventory.

Jul 1 2019, 9:30 AM · Redgum

Jun 28 2019

jperry added a comment to T8301: Update Tool Head Sticker.

Dave can you provide me the file pathway and I'll update the product card?

Jun 28 2019, 2:06 PM · Redgum
jperry added a comment to T8299: use flanged hex head M5x10s for Z lower to frame.

I created TL-HD0573: 8mm, Ratcheting Combination Wrench

Jun 28 2019, 10:30 AM · Redgum
jperry added a comment to T8299: use flanged hex head M5x10s for Z lower to frame.

@logan Just to confirm this is the wrench you are referring to? https://www.mcmaster.com/5163a24

Jun 28 2019, 9:46 AM · Redgum
jperry added a comment to T8299: use flanged hex head M5x10s for Z lower to frame.

I created part (HD-BT0250: M5 x 0.8mm Thread, 10mm Long Flanged Hex Head Screw) for the Hex Head Screw. Let me know if you need anything else.

Jun 28 2019, 9:11 AM · Redgum

Jun 27 2019

jperry added a comment to T8306: Redgum Chassis PP-FP0172 Masking issue.

I sent an email to Weiser for these 3 NCMR's. I copied both Justin and Sheryl on that email.

Jun 27 2019, 1:43 PM · Workmanship Standard

Jun 26 2019

jperry added a comment to T8299: use flanged hex head M5x10s for Z lower to frame.

This is the wrench that was originally sourced with the part. Cost is $10.00.
https://www.mcmaster.com/5163a24

Jun 26 2019, 2:44 PM · Redgum
jperry added a comment to T8309: Change Redgum to Workhorse on part names.

Ok. If you need any help just let me know.

Jun 26 2019, 10:49 AM · Redgum
jperry added a comment to T8299: use flanged hex head M5x10s for Z lower to frame.

Attached is the quote from Hardware Specialty. These parts went down to $0.09 from $0.1059.

Jun 26 2019, 10:45 AM · Redgum
jperry added a comment to T8309: Change Redgum to Workhorse on part names.

I'm finding a total of 53 parts that need to be changed from Redgum to Workhorse. I will get started on them.

Jun 26 2019, 10:43 AM · Redgum

Jun 24 2019

jperry added a comment to T7529: PP-MP0205 E3D Aero Steel Pinion Gear - Issue - Set Screw Hole Location.

I'm not entirely sure what has and hasn't been communicated yet. I have contact E3D about this and requested a drawing. Sam from E3D provided their drawing which was passed along to the appropriate parties at Aleph. I haven't heard anything after that.

Jun 24 2019, 8:44 AM · Yellowfin

Jun 19 2019

jperry added a comment to T6591: USB Drive read intermittent .

Kingston will only do custom branding up to a total of 150 units. Anything over that quantity they do not do custom branding and we would need to order from a distributor for any quantities greater than 150 branded/ unbranded. The USB starts at $4.99 before any branding and I'm sure the cost would be higher than if we did it in house. I got a quote from Sticker Giant and each label would be $0.176.

Jun 19 2019, 12:57 PM · Quiver
jperry closed T7844: Top rod mounts as Resolved.
Jun 19 2019, 11:54 AM · Quiver
jperry added a comment to T7844: Top rod mounts.

We received back this RMA for 199 units. Brain has moved them to dock receiving and they will go back to QC.

Jun 19 2019, 11:54 AM · Quiver

Jun 18 2019

jperry added a comment to T6591: USB Drive read intermittent .

I emailed Kingston to get volume pricing on 500 and 1000 pcs as well as the lead time. Kingston only offers limited custom runs of these up to 150 units. Anything outside of of those quantities they do not do any custom logos. Dani G and I decided to source a label from My Asset Tag that we can place on the side of the USB. I will create a part number and get some samples on order.

Jun 18 2019, 3:59 PM · Quiver
jperry added a comment to T6591: USB Drive read intermittent .

I will delete EL-MS0562

Jun 18 2019, 3:05 PM · Quiver
jperry added a comment to T6591: USB Drive read intermittent .

I created EL-MS0562: Kingston, 16GB, USB 2.0 Flash Drive

Jun 18 2019, 3:04 PM · Quiver
jperry added a comment to T6591: USB Drive read intermittent .

We have 662 on hand of the EL-MS0543 and were purchased at $3.83. The new version from Kingston is 4.99 and we only quoted up to 150 units. I emailed them for a new quoter and lead time.

Jun 18 2019, 1:36 PM · Quiver
jperry added a comment to T6784: verify new chassis sheet metal .

I emailed PMM. We were on credit hold with them but these are past due.

Jun 18 2019, 1:30 PM · Redgum
jperry closed T6714: Re-Ordering Rules- TAZ Pro Extruder KT-CP0145 as Resolved.
Jun 18 2019, 1:10 PM · Retail Parts
jperry added a comment to T6714: Re-Ordering Rules- TAZ Pro Extruder KT-CP0145.

I created 6 reordering rules for this part.

Jun 18 2019, 1:10 PM · Retail Parts
jperry added a comment to T6798: New middle foam insert for packaging.

I created the following parts. Have we received a quote back on these parts?

Jun 18 2019, 11:53 AM · Redgum
jperry closed T7954: DO Routing-TAZ Pro 5 to 1 Geard Moons Motor- KT-MT0005 as Resolved.
Jun 18 2019, 9:52 AM · Retail Parts
jperry added a comment to T7954: DO Routing-TAZ Pro 5 to 1 Geard Moons Motor- KT-MT0005.

Reordering rules were setup for AM/ Retail and back stock

Jun 18 2019, 9:52 AM · Retail Parts
jperry closed T7271: Initial Manufacturing Order - LulzBot Tool Kit KT-MS0013 as Resolved.
Jun 18 2019, 9:38 AM · Retail Parts
jperry added a comment to T7271: Initial Manufacturing Order - LulzBot Tool Kit KT-MS0013.

I placed a MO for 25 pcs for AM/ Retail

Jun 18 2019, 9:38 AM · Retail Parts
jperry closed T5426: Re-Ordering Rules-Etched Heat Beds-TAZ- KT-HB0014 and Mini KT-HB0015 as Resolved.
Jun 18 2019, 9:31 AM · Retail Parts

Jun 13 2019

jperry added a comment to T7644: PP-FP0138 Silk Screened Bed Mount Plate, Mini Epocs.

Hey Kent. Epocs knows they missed these graphics. We told them we would complete the functional test and then they would take back the parts to add the graphics. If these parts are ready to go, I'll get them back to Epocs to be finished.

Jun 13 2019, 2:51 PM · Restricted Project
jperry added a comment to T7844: Top rod mounts.

Quattro said they would only take a day. He should receive them tomorrow by end of day.

Jun 13 2019, 1:38 PM · Quiver
jperry added a comment to T7844: Top rod mounts.

199 units were returned to me from McCloud in ToolHead. We are sending these units back to Quattro to be repaired on 6/13.

Jun 13 2019, 1:31 PM · Quiver
jperry added a comment to T7790: create part numbers for milled parts for tool head.

Here you go Tyler!

Jun 13 2019, 11:36 AM · kangaroo-paw

Jun 7 2019

jperry added a comment to T7659: Interconnect Housing - endstop wire retention.

I think making some sort of a kanban system for these parts would be ideal.

Jun 7 2019, 12:58 PM · Quiver

Jun 6 2019

jperry added a comment to T7663: Serial Number Sticker for Redgum.

I created the following parts

Jun 6 2019, 2:58 PM · Redgum
jperry closed T3420: removed inventroy for KT-HR0002 and KT-HR0003 as Resolved.
Jun 6 2019, 2:01 PM · Retail Parts
jperry added a comment to T3420: removed inventroy for KT-HR0002 and KT-HR0003.

Both harnesses have been archived.

Jun 6 2019, 2:00 PM · Retail Parts

Jun 4 2019

jperry added a comment to T7630: FInal MO for non-etched Beds.

The buffers for KT-HB0013 we archived/inactivated when we moved to the new version. These parts won't show up in stock buffer planning if they are archived. We already have a replacement for these AS-HB0006 that we have been using. These MO's are to consume what remaining inventory of the old version.

Jun 4 2019, 12:03 PM · Retail Parts
jperry added a comment to T7630: FInal MO for non-etched Beds.

I reactivated the retail buffer for KT-HB0013 and requested procurement. I also requested 16 units of KT-HB0011.

Jun 4 2019, 11:18 AM · Retail Parts

May 29 2019

jperry added a comment to T6258: QC to MER/Production Passdown - TAZ Pro, Multiple Part #s, Aero Idler Levers.

Which part were the paint identifiers on? FP0135 or FP0162?

May 29 2019, 2:02 PM · Workmanship Standard

May 23 2019

jperry added a comment to T6798: New middle foam insert for packaging.

I created part SH-PA0067: Redgum, Print Head Stabilizer Foam, 1.7# Density Polyethylene Foam, Black.
Do we have a drawing ready for this so I can quote it?

May 23 2019, 10:32 AM · Redgum
jperry added a comment to T7436: PMM_PP-FP0171 bed mount plate mini white.

Thanks Kent!

May 23 2019, 9:50 AM · Restricted Project
jperry added a comment to T5371: PC-Max to PolyMax PC name change.

They should have the new labels on them.

May 23 2019, 8:41 AM · Filament
jperry added a comment to T5371: PC-Max to PolyMax PC name change.

We have 570 reels coming to Chicago and 30 reels to London. This isn't the first order of this material we have ordered/ received. As far as I know all they are doing is changing the name from PC-Max to PolyMax PC.

May 23 2019, 8:37 AM · Filament

May 21 2019

jperry added a comment to T6591: USB Drive read intermittent .

I contacted Kingston with this request and copied Kent on the email.

May 21 2019, 12:31 PM · Quiver

May 20 2019

jperry closed T7382: create pn as Resolved.
May 20 2019, 12:37 PM · Brizo
jperry added a comment to T7382: create pn.

I created the following parts:

May 20 2019, 12:37 PM · Brizo

May 16 2019

jperry added a comment to T7270: Copper tape on RAMBo.

We will be getting in a total of 650 TAZ 6 Chassis w/ Redgum graphics. We received 239 yesterday. The part number is PP-FP0172

May 16 2019, 11:47 AM · Redgum

May 15 2019

jperry closed T6638: LULZBOT plaque as Resolved.
May 15 2019, 3:55 PM · Redgum
jperry added a comment to T2896: Initial Warehouse Shipment- Einsy Retro.

Procurement request was issued for 25 units.

May 15 2019, 3:43 PM · Retail Parts
jperry added a comment to T3689: RoHS Compliance.

Updates RoHS for hardware from Hardware Specialty.

May 15 2019, 12:00 PM · Quiver

May 14 2019

jperry added a comment to T3689: RoHS Compliance.

DC-LB0175 and DC-LB0176

May 14 2019, 1:26 PM · Quiver
jperry added a comment to T3689: RoHS Compliance.

HD-BT0048: https://www.mcmaster.com/91290a224

May 14 2019, 1:06 PM · Quiver
jperry closed T7281: Re-Ordering Rules- LulzBot 3D Printer Enclousres-KT-MS0010, KT-MS0011, KT-MS0012 as Resolved.
May 14 2019, 11:01 AM · Retail Parts
jperry added a comment to T7281: Re-Ordering Rules- LulzBot 3D Printer Enclousres-KT-MS0010, KT-MS0011, KT-MS0012.

all buffers/ reordering rules have been created for these 3 items.

May 14 2019, 11:01 AM · Retail Parts
jperry closed T7209: Re-Ordering Rules -TAZ Frame Reinforcement Kit KT-MP0001 as Resolved.
May 14 2019, 10:33 AM · Retail Parts
jperry added a comment to T7209: Re-Ordering Rules -TAZ Frame Reinforcement Kit KT-MP0001.

all buffers/ reordering rules have been setup.

May 14 2019, 10:33 AM · Retail Parts
jperry closed T7268: Re-Ordering Rules- LulzBot Tool Kit KT-MS0013 as Resolved.
May 14 2019, 10:21 AM · Retail Parts
jperry added a comment to T7268: Re-Ordering Rules- LulzBot Tool Kit KT-MS0013.

The Stock Buffer/ Reordering Rules have been setup for this product.

May 14 2019, 10:21 AM · Retail Parts
jperry added a comment to T6638: LULZBOT plaque.

I had a typo. It is under PO31775.

May 14 2019, 8:29 AM · Redgum

May 13 2019

jperry added a comment to T6638: LULZBOT plaque.

I placed PO31755 for 100 pcs.

May 13 2019, 3:59 PM · Redgum

May 10 2019

jperry added a comment to T6638: LULZBOT plaque.

The last time we received first articles they were perfectly fine. I do feel comfortable placing a production order now.

May 10 2019, 10:33 AM · Redgum

May 7 2019

jperry added a comment to T6540: Y axis thumb screws tied to frame.

I pulled the drawing from the digi-key website off of the link you provided. Hardware Specialty is a licensed distributor of RAF products so this was an easy find for them. Their cost is half of what Digi-Key is charging.

May 7 2019, 8:24 AM · Redgum

May 6 2019

jperry added a comment to T6540: Y axis thumb screws tied to frame.

HS came back with a price of $1.52 with a MOQ of 1,000 pcs.

May 6 2019, 3:40 PM · Redgum