Page MenuHomeAleph Objects Inc

kim (Kim Greene)
User

Projects

User Details

User Since
Jul 26 2016, 12:08 PM (164 w, 4 d)

Recent Activity

Mon, Sep 16

kim closed T8537: new schleuniger applicator to make EL-HR0190 syringe pump harness as Resolved.

Yes, we are getting these Harnesses from CCX, ok to close this ticket.

Mon, Sep 16, 11:35 AM · kangaroo-paw
kim added a comment to T10072: Determine feasibility of reorder (heat bed disc).

I will send request for quote to National Plastic Heater (supplier for these Heaters) and wait for the quotation.

Mon, Sep 16, 11:17 AM · Retail Parts

Thu, Aug 29

kim created T9890: EL-HR0181 Y-Z End Harness, Assembled Rev c / CCX review request.
Thu, Aug 29, 10:37 AM

Wed, Aug 28

kim added a comment to T8539: Tool Kit Bag.

@DaniAO
Created AO P/N : TL-MS0691
product card is setup with all information needed. A purchase request can be made now.

Wed, Aug 28, 11:20 AM · kangaroo-paw

Fri, Aug 23

kim added a comment to T8537: new schleuniger applicator to make EL-HR0190 syringe pump harness.

Hello, CCX is needing a BoM they have the drawing, The drawing only contains internal part numbers, 3 of which I could find from past quotes.

Fri, Aug 23, 11:35 AM · kangaroo-paw
kim added a comment to T8537: new schleuniger applicator to make EL-HR0190 syringe pump harness.

Dani, I just forwarded an email that CCX was needing BoMs. Possibly Adam can followup on this w/CCX.

Fri, Aug 23, 10:46 AM · kangaroo-paw

Aug 12 2019

kim added a comment to T9479: PP-MP0281 Carriage pre-inserted with a 6mm bushing sleeve.

sent drawing and requested quote from igus for milled part with bearing inserted.

Aug 12 2019, 1:48 PM · kangaroo-paw
kim closed T9266: update name in odoo for touchscreen cover as Resolved.

I updated the part description as requested to: Kangaroo Paw, Touch Screen Bezel Cover

Aug 12 2019, 1:29 PM · kangaroo-paw

Aug 7 2019

kim added a comment to T9479: PP-MP0281 Carriage pre-inserted with a 6mm bushing sleeve.

Tyler / All, We have procured PP-MP0281 from JMT, and not from igus. I spoke with Josh, igus has not quoted this carriage and we would need a more complete drawing that details the bushing inserted into the carriage to send to igus for consideration.
Please let us know.Thank you

Aug 7 2019, 1:54 PM · kangaroo-paw
kim added a comment to T8537: new schleuniger applicator to make EL-HR0190 syringe pump harness.

RFQ to CCX, sent the drawing for EL-HR0190 to get First article and production qty pricing of entire harness.

Aug 7 2019, 10:12 AM · kangaroo-paw

Jul 26 2019

kim created T9131: EL-HR0181 and EL-HR0186 CCX inquiry Redgum Harnesses Drawings.
Jul 26 2019, 11:50 AM
kim added a comment to T8537: new schleuniger applicator to make EL-HR0190 syringe pump harness.

Quotes
EL-HR0172 (harness) lead time: 12 weeks
Part number: 4634 1402 04190
1-99 pieces: $3.75 each
100-199 pieces: $2.75 each
200-999 pieces: $1.80 each
1,000-4,999 pieces: 1.15 each

Jul 26 2019, 10:09 AM · kangaroo-paw
kim closed T9127: CCX_First Article Report: EL-HR0182 Y Motor Ground Harness, Assembled Rev C as Resolved.

Emailed FA report to CCX.

Jul 26 2019, 9:31 AM · Restricted Project
kim added a comment to T9028: Y-motor ground getting caught in foam on production floor..

Please note: We have just received the First Article Harness EL-HR0182 Rev C and Oliver is testing. This FA is the last TAZ WE harness from CCX needing approval and we are ready to release a production qty Purchase order
If a change is going to be made, we need to make a decision today. We must have complete approval of the Harnesses prior to releasing this PO.

Jul 26 2019, 7:57 AM · Redgum

Jul 25 2019

kim added a comment to T8537: new schleuniger applicator to make EL-HR0190 syringe pump harness.

I just found where we did purchase EL-HR0172 [4634 1402 04190] Harness for NEMA 11 Stepper Motor from Moons. I will request a quote from them.

Jul 25 2019, 3:33 PM · kangaroo-paw
kim added a comment to T8537: new schleuniger applicator to make EL-HR0190 syringe pump harness.

Tyler, The Nema stepper Motor EL-MR0063, I show we have purchase 5 pcs of this motor, but don't have a quote from Moons about this Harness. Please forward any information you have on this Harness and I will followup with Moons. This is the first that I have heard I was suppose to source this Harness with Moons.
Thanks, Kim

Jul 25 2019, 3:31 PM · kangaroo-paw
kim added a comment to T9028: Y-motor ground getting caught in foam on production floor..

Adam /Logan, Yes this is harness EL-HR0182 Rev C and CCX is producing. We have the First Article sample being delivered today. (for revision C)

Jul 25 2019, 11:00 AM · Redgum
kim added a comment to T9028: Y-motor ground getting caught in foam on production floor..

Adam, what is the Aleph P/N please.

Jul 25 2019, 10:51 AM · Redgum

Jul 24 2019

kim created T9013: Drawing needs updated on EL-HR0186 Dual V3 Adapter Harness Rev IR that shows sticker .
Jul 24 2019, 10:09 AM · Redgum
kim added a comment to T8955: cb z endstop harness doesnt have solder sleeve pn.

@sherylb
Im working with Kent now to get updated drawing to CCX. Per Kent: I can review and merge that drawing, so that it shows up on devel. Check with Sheryl and ask her to assign it to me if she would like me to do that.

Jul 24 2019, 7:56 AM · Redgum

Jul 22 2019

kim closed T8905: CCX_First Article Report: EL-HR0179 X Motor Harness, Assembled Rev B as Resolved.

Emailed FA report to CCX.

Jul 22 2019, 10:08 AM · Restricted Project
kim closed T8907: CCX_First Article Report: EL-HR0177 CB Y Endstop Harness, Assembled Rev B as Resolved.

Emailed FA report to CCX.

Jul 22 2019, 10:08 AM · Restricted Project

Jul 18 2019

kim closed T8826: Make Production Tag as Resolved.

Released PO32324 to Coren Printing for these documents.

Jul 18 2019, 10:40 AM · Redgum
kim closed T8830: CCX_First Article Report: EL_HR0173 CB X Harness Rev D as Resolved.

Emailed FA report to CCX, passed

Jul 18 2019, 10:00 AM · Restricted Project
kim closed T8831: CCX_First Article Report: EL-HR0178 Extruder Harness, Assembled Rev C as Resolved.

Emailed CCX FA report

Jul 18 2019, 10:00 AM · Restricted Project

Jul 16 2019

kim triaged T8801: Dust on smooth rods, add specs to workmanship standards as Normal priority.
Jul 16 2019, 1:05 PM · Workmanship Standard

Jul 15 2019

kim added a comment to T7552: Default tweezers can't be used during printing for several layers.

We just received 3,000 pc of TL-HD0049 I will look into straight tweezers (source)

Jul 15 2019, 8:19 AM · Quiver

Jul 2 2019

kim added a comment to T8427: Need cable harness part numbers.

@DaniAO here are the AO part numbers:
EL-HR0188 LCD harness 1, kangaroopaw,
EL-HR0189 LCD harness 2, split, kangaroopaw
EL-HR0190 syringe pump harness kangaroopaw
EL-HR0191 LCD ground harness, kangaroopaw

Jul 2 2019, 3:01 PM · kangaroo-paw

Jun 10 2019

kim added a comment to T7687: EL-HR0150: Cable diagram got overwritten by another change.

Note: Harness EL-HR0150 Rev A that we have received First articles notedRev B are actually EL-HR0185 Rev B not EL-HR0150.
I will ask CCX to re-quote EL-HR0150 REV A again- and procure another First Article 5 pcs

Jun 10 2019, 11:05 AM · Quiver

May 31 2019

kim closed T7488: CCX_First Article Report: EL-HR0155 CB Bed Harness, Assembled Rev D as Resolved.

Sent CCX FA report, approved.

May 31 2019, 3:12 PM · Restricted Project

May 29 2019

kim closed T7487: CCX_First Article Report: EL-HR0146 Bed Extension Harness, Assembled Rev C as Resolved.

Emailed FA report to CCX, passed

May 29 2019, 11:26 AM · Restricted Project
kim closed T7446: CCX_First Article Report: EL-HR0148 CB Bed Power Harness, Assembled Rev C as Resolved.

Sheryl emailed FA reports to CCX.

May 29 2019, 10:49 AM · Restricted Project
kim closed T7447: CCX_First Article Report: EL-HR0142 Z Endstop Harness Assembled Rev C as Resolved.

Emailed report to CCX.

May 29 2019, 10:44 AM · Restricted Project
kim closed T7095: CCX_First Article Report: AS-CB0064 Heatsink Fan Harness Revision A as Resolved.

5/8/19 notified CCX with FA report-passed

May 29 2019, 10:38 AM · Restricted Project
kim closed T7466: CCX_First Article Report: EL-HR0143 Y-Z Harness, Assembled Rev J as Resolved.

Sheryl emailed CCX FA report- approved.

May 29 2019, 10:34 AM · Restricted Project
kim closed T7465: CCX_First Article Report: EL-HR0160 E1 Thermotground Harness, Assembled Rev D as Resolved.

Sheryl emailed CCX FA report- approved.

May 29 2019, 10:33 AM · Restricted Project
kim closed T7468: CCX_First Article Report: EL-HR0144 Filament Sensor Harness, Assembled Rev C as Resolved.

Sheryl emailed CCX FA report -passed

May 29 2019, 10:31 AM · Restricted Project

May 23 2019

kim closed T7094: CCX_First Article Report: EL-HR0168 PLUG TO SWITCH BLACK AND WHITE WITH FERRITE Revision A as Resolved.

5/8 emailed CCX First article approval

May 23 2019, 3:36 PM · Restricted Project
kim closed T7092: CCX_First Article Report: EL-HR0164 USB GROUND Revision A as Resolved.

5/8/19 emailed CCX First article approval.

May 23 2019, 3:34 PM · Restricted Project
kim closed T7157: CCX_First Article Report: AS-CB0077 Mini SW to PW White Wire Extension Revision IR as Resolved.

emailed CCX first article approval

May 23 2019, 3:34 PM · Restricted Project
kim closed T7175: CCX_First Article Report: EL-HR0149 CB Y-Z HARNESS, ASSEMBLED Revision D as Resolved.

5/8 emailed First article approval to CCX.

May 23 2019, 3:33 PM · Restricted Project
kim closed T7179: CCX_First Article Report: EL-HR0157 CB SWITCH TO PSU HARNESS, ASSEMBLED Revison A as Resolved.

5/8/19 sent email to CCX First article approval

May 23 2019, 3:32 PM · Restricted Project
kim closed T7182: CCX_First Article Report: EL-HR0151 CB X HARNESS, ASSEMBLED Revision A as Resolved.

5/9/19 sent email to CCX first article approval

May 23 2019, 3:31 PM · Restricted Project
kim closed T7193: CCX_First Article Report: EL-HR0145 E1 Extension Harness, Assembled Revision A as Resolved.

5/10/19 dent email to CCX first article approval

May 23 2019, 3:30 PM · Restricted Project
kim closed T7197: CCX_First Article Report: EL-HR0150 CB Z ENDSTOP HARNESS, ASSEMBLED Revision A as Resolved.

emailed CCX FA approval document.

May 23 2019, 3:29 PM · Restricted Project
kim added a comment to T7440: hd-eX0090 90 degree Corner Bracket 2 Hole 20mm Slotted Inside Corner Bracket with Dual Support for 20 Series, T-slot / Inposition.

I have the samples at my desk for review. Kim

May 23 2019, 1:22 PM · Restricted Project
kim triaged T7440: hd-eX0090 90 degree Corner Bracket 2 Hole 20mm Slotted Inside Corner Bracket with Dual Support for 20 Series, T-slot / Inposition as Normal priority.
May 23 2019, 1:21 PM · Restricted Project

May 21 2019

kim closed T6599: CCX_First Article Report: EL-HR0152 CB PSU to ground green harness, assembled, Revision A as Resolved.

4/11 notified CCX FA report passed

May 21 2019, 7:06 AM · Restricted Project
kim closed T7256: CCX_First Article Report: EL-HR0154 DC Power Harness, Assembled REV A as Resolved.

5/14/19 notified CCX with FA report- passed.

May 21 2019, 7:05 AM · Restricted Project

May 17 2019

kim added a comment to T7333: EL-MS0356, alternate manufacturer for Heat shrink tubing.

OCA part card updated to include approved heatshrink DWHST12BK4.

May 17 2019, 2:11 PM · Redgum, TAZ 6, Quiver
kim added a comment to T7333: EL-MS0356, alternate manufacturer for Heat shrink tubing.

Correction: The AO partnumber should be EL-MS0356 Heat Shrink Dual Tubing 1/2" for 5mm ID 11mm OD Ferrite, Black 4FT

May 17 2019, 7:32 AM · Redgum, TAZ 6, Quiver

May 16 2019

kim added a comment to T7270: Copper tape on RAMBo.

I have created new AO p/n EL-MS0560 for Conductive Copper Foil Electrical Tape Conductive Adhesive, 3/4" Wide, this will need added to the BOM.

May 16 2019, 3:30 PM · Redgum
kim added a comment to T7333: EL-MS0356, alternate manufacturer for Heat shrink tubing.

See attached files for specifications/drawings of both items.

May 16 2019, 3:00 PM · Redgum, TAZ 6, Quiver
kim triaged T7333: EL-MS0356, alternate manufacturer for Heat shrink tubing as High priority.
May 16 2019, 2:58 PM · Redgum, TAZ 6, Quiver
kim closed T6602: CCX_First Article Report: AS-CB0081 Mini PS to Einsyretro black wire Revision IR as Resolved.

4/11/19 sent FA report email to CCX.

May 16 2019, 9:01 AM · Restricted Project
kim closed T7322: CCX_First Article Report: EL-HR0161 E2 Extruder Motor Harness, Assembled Rev C as Resolved.

5/16/19 sent FA report email to CCX.

May 16 2019, 8:59 AM · Restricted Project
kim closed T6635: CCX_First Article Report: AS-CB0080 PS to ground post extension Revision IR as Resolved.

5/16/19 sent FA report email to CCX.

May 16 2019, 8:56 AM · Restricted Project
kim closed T7104: CCX_First Article Report: AS-CB0083 Hibiscus LCD Harness Harness 1 Revision B as Resolved.

5/8/19 sent FA report email to CCX.

May 16 2019, 8:54 AM · Restricted Project
kim closed T6926: CCX_First Article Report: AS-CB0063 v2Aero Hotend GND Wire as Resolved.

4/30/19 sent FA report email to CCX.

May 16 2019, 8:48 AM · Restricted Project
kim closed T6997: CCX_First Article Report: AS-CB0084 Hibiscus LCD Harness 2 Revision B as Resolved.

4/30/19 sent FA report email to CCX.

May 16 2019, 8:47 AM · Restricted Project
kim closed T6999: CCX_First Article Report: AS-CB0074 MINI PC TO EINSYRETRO RED WIRE Revision IR as Resolved.

5/16/19 sent FA report email to CCX.

May 16 2019, 8:46 AM · Restricted Project
kim closed T7002: CCX_First Article Report: AS-CB0079 Plug to Ground Post Extension- Hibiscus Revision IR as Resolved.

4/30/19 sent FA report email to CCX.

May 16 2019, 8:43 AM · Restricted Project
kim closed T7085: CCX_First Article Report: EL-HR0147 LCD-USB Harness, Assembled Revision IR as Resolved.

5/13/19 sent FA report email to CCX.

May 16 2019, 8:42 AM · Restricted Project
kim closed T7089: CCX_First Article Report: EL-HR0171 Y MOTOR GROUND EXTENSION Revision A as Resolved.

5/16/19 sent FA report email to CCX.

May 16 2019, 8:41 AM · Restricted Project
kim closed T7091: CCX_First Article Report: EL-HR0156 CB ERASE SWITCH HARNESS, ASSEMBLED Revision B as Resolved.

5/16/19 sent FA report email to CCX.

May 16 2019, 8:40 AM · Restricted Project

May 15 2019

kim added a comment to T7270: Copper tape on RAMBo.

Mark, could you please look at these 2 options and get back to me with what item will work best for our needs.
Amazon: Tapes Master Copper Foil Tape - EMI Shielding Conductive Adhesive 10 ft (1/2" Wide)
or
Mcmaster : 76555A712 Conductive Copper Foil Electrical Tape, Conductive Adhesive, 1/2" Wide, 18 Feet Long

May 15 2019, 7:51 AM · Redgum

May 14 2019

kim closed T7293: Mounting Configuration/ Brackets igus chain as Resolved.

I have passed this information back to igus. Resolved.

May 14 2019, 2:49 PM · Mini-Hibiscus, Quiver
kim added a comment to T7293: Mounting Configuration/ Brackets igus chain .

please confirm the mounting configuration for the assemblies that we are building EL-HR0140, EL-HR1041, EL-HR0130, and EL-HR0135. They should be Config #0, or Config #1.
Josh, please specify config # for each

May 14 2019, 11:06 AM · Mini-Hibiscus, Quiver
kim triaged T7293: Mounting Configuration/ Brackets igus chain as Normal priority.
May 14 2019, 10:39 AM · Mini-Hibiscus, Quiver

Apr 24 2019

kim updated subscribers of T6776: EL-HR0141 large cable chains oriented wrong.

We need a clear-updated drawing that reflects orientation of the connectors on the Harness example: (which on is on top and bottom)

Apr 24 2019, 8:50 AM · Quiver

Feb 26 2019

kim added a comment to T3689: RoHS Compliance.

Hello, I will go through the list again and request. I do see that Actuonix EL-MS0513 (micro linear actuator) was purchased once, for review by R&D do we still need Rohs compliance for it? Its not on a BoM. some other p/ns might not be on BoMs, do they need Rohs info?

Feb 26 2019, 8:52 AM · Quiver

Feb 25 2019

kim added a comment to T3645: Rear Label.

i HAVE CREATED AO partnumbers:
Packing list DC-MS0078
EC, Declaration of Conformity DC-MS0079
Safety Warnings DC-MS0080
Quality Assurance Record DC-MS0081
Quick Start Guide DC-MN0019

Feb 25 2019, 12:01 PM · Quiver

Jan 16 2019

kim added a comment to T5149: Order USB sticks with LulzBot Logo.

Supplier is shipping a sample, will not have marking on clip, but be USB drive and swivel clip. Approx 1/24/19 arrival
Black Case/Lime Green/White Imprint – 4GB $3.83 each, production time, 10 days, plus shipping.
Please process a Purchase request for ordering these USB drives. Thank you, Kim

Jan 16 2019, 2:45 PM · Quiver

Jan 15 2019

kim added a comment to T5149: Order USB sticks with LulzBot Logo.

Note, I have requested quote cost for 1,000 pcs, 1500 pcs, 2000 pcs of the USB. I expect to have this information no later than Friday 1/18/19

Jan 15 2019, 3:30 PM · Quiver

Jan 14 2019

kim added a comment to T5149: Order USB sticks with LulzBot Logo.

Hello, Updated pdf with only Lulzbot and registered has been sumitted to supplier for consideration.

Jan 14 2019, 2:28 PM · Quiver
kim added a comment to T5149: Order USB sticks with LulzBot Logo.

@DRobertson I sent the pdf you posted earlier to have mock-up usb created. would it be possible to revise the pdf? right away?

Jan 14 2019, 2:09 PM · Quiver

Jan 11 2019

kim added a comment to T5149: Order USB sticks with LulzBot Logo.

F2737751

Jan 11 2019, 8:57 AM · Quiver

Jan 8 2019

kim added a comment to T5149: Order USB sticks with LulzBot Logo.

The previous Flash USB was 4gb, sorry for error on earlier post.
@Tyler is 4gb sufficient size?
@DRobertson If you have artwork, I have found a company that will make a mockup for our review. Please let me know.

Jan 8 2019, 9:34 AM · Quiver
kim added a comment to T5149: Order USB sticks with LulzBot Logo.

Josh, I am working to find other source for usb flash for quiver.
Mini2 uses a 'SDcard' whereas Mini1 (gladiola) was a usb flash -thumb drive however it was a 6gb, and the supplier did have high failures.

Jan 8 2019, 7:34 AM · Quiver

Dec 18 2018

kim added a comment to T4837: Serial Number Labels.

Partnumbers created:
DC-LB0178 TAZ 7 NA Serial Number Sticker, Tamper Evident
DC-LB0179 TAZ 7 AU Serial Number Sticker, Tamper Evident
DC-LB0180 TAZ 7 EU Serial Number Sticker, Tamper Evident

Dec 18 2018, 9:34 AM · Quiver

Dec 12 2018

kim added a comment to T4495: Add USB static fingers to mitigate ESD to the USB drive socket housing.

Tyler, the samples were shipped today 12/12 and should deliver tomorrow 12/13

Dec 12 2018, 2:45 PM · Quiver

Nov 27 2018

kim added a comment to T3977: Include bed power harness retention clip in accesories kit and document how to use it in QSG..

I purchased 10 pcs and they show located in MER. I will add 10 pcs to first order to test.

Nov 27 2018, 9:40 AM · Quiver
kim closed T3977: Include bed power harness retention clip in accesories kit and document how to use it in QSG. as Resolved.

Found immediate stock at Mouser to support Alpha and Beta builds.
and previously had source: Min order qty 1,000 pc 0.421 / 5 weeks leadtime, contacted a few other distributors for best cost and lead time info to set up OCA product card.

Nov 27 2018, 9:29 AM · Quiver

Oct 11 2018

kim added a comment to T3977: Include bed power harness retention clip in accesories kit and document how to use it in QSG..

@jessica @nickp @logan
I found source, Sager, 100 min order qty 5 weeks lead time $0.421 each

Oct 11 2018, 2:59 PM · Quiver

Apr 24 2018

kim closed T1805: Order Packaging as Resolved.

Hi, The mini2 foam, confirm delivery is May 2nd at this time we are expediting.
Boxes are in stock at Preferred and can be delivered at any time. Thanks! Kim

Apr 24 2018, 9:55 AM · Mini-Hibiscus

Apr 19 2018

kim closed T2253: fork terminal on AS-CB0069 Z brake power harness as Resolved.

EL-MS0502 has been ordered from supplier to meet production demands.

Apr 19 2018, 3:02 PM · Mini-Hibiscus
kim added a comment to T2253: fork terminal on AS-CB0069 Z brake power harness.

@caguilar @jessica Located available stock of EL-MS0502, Chris will you please enter a Purchase request for qty needed. Thank you

Apr 19 2018, 9:57 AM · Mini-Hibiscus
kim claimed T2253: fork terminal on AS-CB0069 Z brake power harness.

Need inventory to order EL-MS0502 on Purchase request.
Have Request for availability out to suppliers, pending response.

Apr 19 2018, 9:40 AM · Mini-Hibiscus

Apr 3 2018

kim closed T2299: X-Carriage bearing retention screws rubbing on smooth rod as Resolved.

Logan, Thank you for identifying the part numbers. Kim

Apr 3 2018, 11:30 AM · Mini-Hibiscus
kim reassigned T2299: X-Carriage bearing retention screws rubbing on smooth rod from kent to logan.

It's helpful if the AO partnumbers are identified. need what the AO p/n is for the removing two from the total quantity of M3x8 please
HD-BT0140 stock does cover usage, when the BoM is updated the usage will drive procurements.

Apr 3 2018, 7:52 AM · Mini-Hibiscus

Mar 19 2018

kim closed T1908: Place order with Igus as Resolved.

HD-BU0046 are already ordered, will have tracking later today 5,500pcs
we are waiting on First Article for EL-HR0130 and EL-HR0135 then we will release PO for them. the First Article will deliver tomorrow 3/20 or Wed 3/21

Mar 19 2018, 11:49 AM · Mini-Hibiscus

Mar 12 2018

kim triaged T2072: Qty of Gladiola Harness EL-HR0102 & EL-HR0108 needed to suppport retail and repair as Normal priority.
Mar 12 2018, 10:32 AM · Mini-Hibiscus

Mar 6 2018

kim closed T2041: PP-MP0210 (Heatsink Einsy) as Resolved.

closed

Mar 6 2018, 11:20 AM · Mini-Hibiscus
kim reopened T2041: PP-MP0210 (Heatsink Einsy) as "Open".
Mar 6 2018, 11:19 AM · Mini-Hibiscus

Feb 20 2018

kim closed T1834: Z-Brake Production Boards as Resolved.
Feb 20 2018, 9:57 AM · Mini-Hibiscus

Feb 14 2018

kim closed T1831: Order Open Pulley Wheel Kit as Resolved.
Feb 14 2018, 3:20 PM · Mini-Hibiscus
kim added a comment to T1831: Order Open Pulley Wheel Kit.

Released PO for Pulley Wheel Kits, 1000 pcs in transit.

Feb 14 2018, 3:20 PM · Mini-Hibiscus
kim closed T1790: Quote and receive heatsinks as Resolved.
Feb 14 2018, 3:17 PM · Mini-Hibiscus
kim added a comment to T1790: Quote and receive heatsinks.

Received Quote and released PO to Colorado Waterjet, will start with one week for First Article samples, prior to manufacturing full 1,000 pcs.
Lead time for First Article is approximately 1 week.

Feb 14 2018, 3:14 PM · Mini-Hibiscus

Feb 13 2018

kim added a comment to T1790: Quote and receive heatsinks.

Quote pending, should receive it today

Feb 13 2018, 12:30 PM · Mini-Hibiscus