=Release Notes= ===Cura 2.6.66 || Release Date: TBD === Firmware - 1.1.5.70 * Adjusted wipe height for LulzBot Minis * Increase tx buffer * Adjusted PID settings for Aerostruders to increase stability * Change Baud Rate to 250000 for Minis for better communication * Update probe positioning to avoid end stop collision Start/End Gcode * Adjusted wipe location for Mini * Added re-prime end gcode to Aerostruders to prevent die swell Material and Filament Profiles * Added experimental material category -- These included base profiles are not refined, but are a good starting point * Fixed new profiles being associated to different material * Adjusted flow rate for flexible materials on Aerostruders Display * Added final print timer **_________________________________________________________________________** ===Cura 2.6.63 || Release Date: 12/22/17=== Firmware - 1.1.5.64 * Re-ordered probe sequence to match legacy Cura * Updated probing locations on washers * Prevents v3 dual extruder from re-homing x/y during print * Change filament function added for E1 and E2 on dual extruders * Raise head during homing to prevent crash on v3 dual extruder and Mini * Estep settings now increment by a full step * Fixed resume bug after pausing through LCD Start Gcode Changes * TAZ 6 start gcode modified so wiping does not trigger endstop -- Fixes need to power cycle between prints * Mini start gcode adjusted to account for shorter travel distance in X of previous versions -- Fixes mid air printing -- Fixes the need to power cycle between prints * Dual v3 Start Gcode has been updated to take into account Marlin Coordinate Shift Filament Profiles * Push Plastics HIPS added * PC+PBT Push Plastics Added CuraLE Repo * Added adhesion information box to allow for material specific notes * Added start gcode to allow softening temperature before wipe, along with temperatures used for testing * Added machine warning when firmware on printer does not match what is included within Cura LE * Fixed custom material bugs -- No longer duplicates every quality profile when adding new material -- Can now edit custom materials after creation Cura Engine - Added first layer initial flow rate to compensate for various filament die swell CuraLE Post Processing * Added plug in for user written post processing scripts (Submitted by FieldOfView) Uranium * Fixed rotation issue with reset button * Fixed issue with OpenGL 4.1 shaders * Fixed issue with Dual Extruder slicing pulling incorrect temperature * Added extruder selection for pre-heat on dual extruder machines **_________________________________________________________________________** ===Cura 2.6.52=== * Initial Release of Cura LulzBot Edition * https://www.lulzbot.com/learn/tutorials/cura-lulzbot-edition-whats-new

=Release Notes= ===Cura 2.6.66 || Release Date: TBD === Firmware - 1.1.5.70 * Adjusted wipe height for LulzBot Minis * Increase tx buffer * Adjusted PID settings for Aerostruders to increase stability * Change Baud Rate to 250000 for Minis for better communication * Update probe positioning to avoid end stop collision Start/End Gcode * Adjusted wipe location for Mini * Added re-prime end gcode to Aerostruders to prevent die swell Material and Filament Profiles * Added experimental material category -- These included base profiles are not refined, but are a good starting point * Fixed new profiles being associated to incorrect material * Adjusted flow rate for flexible materials on Aerostruders Display * Added final print timer **_________________________________________________________________________** ===Cura 2.6.63 || Release Date: 12/22/17=== Firmware - 1.1.5.64 * Re-ordered probe sequence to match legacy Cura * Updated probing locations on washers * Prevents v3 dual extruder from re-homing x/y during print * Change filament function added for E1 and E2 on dual extruders * Raise head during homing to prevent crash on v3 dual extruder and Mini * Estep settings now increment by a full step * Fixed resume bug after pausing through LCD Start Gcode Changes * TAZ 6 start gcode modified so wiping does not trigger endstop -- Fixes need to power cycle between prints * Mini start gcode adjusted to account for shorter travel distance in X of previous versions -- Fixes mid air printing -- Fixes the need to power cycle between prints * Dual v3 Start Gcode has been updated to take into account Marlin Coordinate Shift Filament Profiles * Push Plastics HIPS added * PC+PBT Push Plastics Added CuraLE Repo * Added adhesion information box to allow for material specific notes * Added start gcode to allow softening temperature before wipe, along with temperatures used for testing * Added machine warning when firmware on printer does not match what is included within Cura LE * Fixed custom material bugs -- No longer duplicates every quality profile when adding new material -- Can now edit custom materials after creation Cura Engine - Added first layer initial flow rate to compensate for various filament die swell CuraLE Post Processing * Added plug in for user written post processing scripts (Submitted by FieldOfView) Uranium * Fixed rotation issue with reset button * Fixed issue with OpenGL 4.1 shaders * Fixed issue with Dual Extruder slicing pulling incorrect temperature * Added extruder selection for pre-heat on dual extruder machines **_________________________________________________________________________** ===Cura 2.6.52=== * Initial Release of Cura LulzBot Edition * https://www.lulzbot.com/learn/tutorials/cura-lulzbot-edition-whats-new

=Release Notes= ===Cura 2.6.66 || Release Date: TBD === Firmware - 1.1.5.70 * Adjusted wipe height for LulzBot Minis * Increase tx buffer * Adjusted PID settings for Aerostruders to increase stability * Change Baud Rate to 250000 for Minis for better communication * Update probe positioning to avoid end stop collision Start/End Gcode * Adjusted wipe location for Mini * Added re-prime end gcode to Aerostruders to prevent die swell Material and Filament Profiles * Added experimental material category -- These included base profiles are not refined, but are a good starting point * Fixed new profiles being associated to differenincorrect material * Adjusted flow rate for flexible materials on Aerostruders Display * Added final print timer **_________________________________________________________________________** ===Cura 2.6.63 || Release Date: 12/22/17=== Firmware - 1.1.5.64 * Re-ordered probe sequence to match legacy Cura * Updated probing locations on washers * Prevents v3 dual extruder from re-homing x/y during print * Change filament function added for E1 and E2 on dual extruders * Raise head during homing to prevent crash on v3 dual extruder and Mini * Estep settings now increment by a full step * Fixed resume bug after pausing through LCD Start Gcode Changes * TAZ 6 start gcode modified so wiping does not trigger endstop -- Fixes need to power cycle between prints * Mini start gcode adjusted to account for shorter travel distance in X of previous versions -- Fixes mid air printing -- Fixes the need to power cycle between prints * Dual v3 Start Gcode has been updated to take into account Marlin Coordinate Shift Filament Profiles * Push Plastics HIPS added * PC+PBT Push Plastics Added CuraLE Repo * Added adhesion information box to allow for material specific notes * Added start gcode to allow softening temperature before wipe, along with temperatures used for testing * Added machine warning when firmware on printer does not match what is included within Cura LE * Fixed custom material bugs -- No longer duplicates every quality profile when adding new material -- Can now edit custom materials after creation Cura Engine - Added first layer initial flow rate to compensate for various filament die swell CuraLE Post Processing * Added plug in for user written post processing scripts (Submitted by FieldOfView) Uranium * Fixed rotation issue with reset button * Fixed issue with OpenGL 4.1 shaders * Fixed issue with Dual Extruder slicing pulling incorrect temperature * Added extruder selection for pre-heat on dual extruder machines **_________________________________________________________________________** ===Cura 2.6.52=== * Initial Release of Cura LulzBot Edition * https://www.lulzbot.com/learn/tutorials/cura-lulzbot-edition-whats-new