=Release Notes= ===Cura 2.6.63=== (Release Date: 12/22/17) Firmware - 1.1.5.64 * Re-ordered probe sequence to match legacy Cura * Updated probing locations on washers * Prevents v3 dual extruder from re-homing x/y during print * Change filament function added for E1 and E2 on dual extruders * Raise head during homing to prevent crash on v3 dual extruder and Mini * Estep settings now increment by a full step * Fixed resume bug after pausing through LCD Start Gcode Changes * TAZ 6 start gcode modified so wiping does not trigger endstop -- Fixes need to power cycle between prints * Mini start gcode adjusted to account for shorter travel distance in X of previous versions -- Fixes mid air printing -- Fixes the need to power cycle between prints * Dual v3 Start Gcode has been updated to take into account Marlin Coordinate Shift Filament Profiles * Push Plastics HIPS added * PC+PBT Push Plastics Added CuraLE Repo * Added adhesion information box to allow for material specific notes * Added start gcode to allow softening temperature before wipe, along with temperatures used for testing * Added machine warning when firmware on printer does not match what is included within Cura LE * Fixed custom material bugs -- No longer duplicates every quality profile when adding new material -- Can now edit custom materials after creation Cura Engine - Added first layer initial flow rate to compensate for various filament die swell CuraLE Post Processing * Added plug in for user written post processing scripts Uranium * Fixed rotation issue with reset button * Fixed issue with OpenGL 4.1 shaders * Fixed issue with Dual Extruder slicing pulling incorrect temperature * Added extruder selection for pre-heat on dual extruder machines ===Cura 2.6.52=== * Initial Release of Cura LulzBot Edition * https://www.lulzbot.com/learn/tutorials/cura-lulzbot-edition-whats-new

=Release Notes= ===Cura 3.6.21 || Release Date: 10/11/19=== New Printers * LulzBot Bio ** Profiles for Collagen and Sodium Alginate ** 2.0.0.174 Firmware ** Adjusted recommended settings for ease of use New Materials * IC3D PLA for Workhorse, Pro, and Mini 2 Profile Updates * Improved Workhorse PLA Profiles * Improved Pro PLA Profiles Bug Fixes * Improved reliability of serial USB Connection * Fixed brim setting for nGen on TAZ Pro * Fixed input field size causing issues on some monitor resolutions ===Cura 3.6.20 || Release Date: 9/20/19=== Profile Updates * TAZ Pro ** CSL ABS, IC3D ABS, 910, Bridge, NinjaFlex, PA-CF, Polymax PC, IC3D PETg, Polycast, Polylite, nGen, Polydissolve, PVA, Polyflex * TAZ Workhorse ** CSL ABS, IC3D ABS, Alloy 910, Bridge Nylon, NinjaFlex, PA-CF, Polymx PC, PETg, Polycast, Polylite, nGen Material Updates * TAZ Pro and Workhorse ** Added Polymaker CoPA, PA6-GF, PA6-CF * Mini 2 ** IC3D PLA Bug Fixes * Fixed issue where profile changes were not saved when creating/exporting ** Prime tower location, Birdge Detection * Updated links to correct products * Fixed bed compensation stack up for TAZ 6 FlexyDually v2 * Fixed rounding error displaying layer height **_________________________________________________________________________** ===Cura 3.6.18 || Release Date: 7/31/19=== Profile Updates * TAZ Workhorse ** NinjaFlex - High Detail update to reduce stringing and improve quality ** ABS - Update to improve strength while maintaining improved overhangs ** PETg - Improvements to both overhangs and strength * TAZ 6 ** Updated dual v3 prime tower positions to be within build area by default Other * Update EEPROM check box disabled by default for TAZ Pro and TAZ Workhorse to maintain calibration data between firmware updates * "Print one at a time" now available on dual machines when only using one extruder for the print and "no material" in the other Bug Fixes * Fixed firmware flashing issue with 32bit archim boards causing Cura to crash after updating firmware on Windows 10 * Fixed firmware naming mismatch causing Workhorse printers to throw a warning while connecting * Fixed Cura crash when selecting "wipe nozzle" button without a model loaded * Fixed Cura crash when unplugging USB from the computer while connected **_________________________________________________________________________** ===Cura 3.6.15 || Release Date: 7/22/19=== New Printers * TAZ Workhorse ** SL, HE, HS, HS+, Dual v3 Profiles and Materials added Profile Updates * TAZ Pro No Material Update ** All settings from "No Material" are ignored. This option should activated on the inactive extruder when only using one extruder for printing * IC3D ABS Profile Updates * Polylite PLA Profile Updates * CSL ABS Updates Firmware Update * TAZ Pro and Workhorse updated to marlin 2.0.0.144 Bug Fixes: * Fixed machine addition bug making it possible to select an incompatible tool head combination * Fixed TAZ Pro Wipe Nozzle Button ===Cura 3.6.13 || Release Date: 7/1/19=== Profile Updates * TAZ Pro ** Fixed incorrect layer height setting for standard Polylite PLA **_________________________________________________________________________** ===Cura 3.6.12 || Release Date: 6/25/19=== Profile Updates * TAZ Pro ** Updates to: PA-CF, PolyLite PLA, NinjaFlex, eSUN PVA, PolyFlex, Alloy 920GF, Alloy 910 Material Updates * IC3D PLA added to TAZ 6 SE Tool head * PA-CF density updated Firmware Update * TAZ Pro firmware set to 2.0.0.135 * Fixed issue with automatic offset calibration Features * Added extruder selection when adding brim and raft in dual-headed machines Bug Fixes * Fixed bug with first layer flow rate not returning to set flow rate after first layer * Fixed issue with incorrect variable in start GCODE for bed temperature initial layer * Fixed support infill layer height mismatch during dual extrusion * Fixed display issue showing overly large buttons * Fixed issue where tool head travel limits are not taken into account when using E2 as support (Pro) * Movement and hot end settings no longer revert when moving from monitor to prepare screen Printer Updates * TAZ Workhorse Edition added for all compatible tool head combinations and initial profiles for testing **_________________________________________________________________________** ===Cura 3.6.8 || Release Date: 5/2/19=== New Printers * LulzBot TAZ Pro and associated profiles ** TAZ Pro firmware = Marlin 2.0.0.110 New Features * Updated extruder switch mechanics for dual headed machines * Flashing of 32 bit boards using bin files * Manual control movements are now remembered when switching to and from prepare screen * Can now load multiple STL files at once Bug fixes * Fixed the improper display of layer heights while using dual extrusion * Fixed issue where machine buttons were not consistent between machines **_________________________________________________________________________** ===Cura 3.6.3 || Release Date: 2/20/19=== * Merged 3.6 cura engine from upstream New Features * Bridging detection included in experimental settings ** Control your fan speed, flow rate, movement speed, and more for bridging moves only * Custom Support Plugin ** Point and click to select support locations. (Must disable automatically drop to build plate in preferences.) * Support Blocker Plugin ** Point and click to select locations that will not be supported. (Must disable automatically drop to build plate in preferences.) * Circular prime tower will help prevent failure mid print * Retractions can now be turned off on support moves * Gyroid Infill * Brim now has option to print only on the outer edge of object New Materials * PolyCast Profiles added for all printers User Interface Changes * Added LulzBot Dark Theme ** Preferences > Configure Cura > Theme > LulzBot Dark > Restart Cura * Fixed extruder 2 progress bar color in monitor tab Firmware updated to 1.1.9.34 for all LulzBot Printers * Updated motor current for adapter tool heads to prevent clicking * Enabled Z backlash compensation for all TAZ 6, Mini 1, Mini 2 ** Define fading distance in quality, if set to 0 it is not enabled * Updated heating temperatures during re-wipe sequence Start Gcode * Removed superfluous G21 commands from start gcode ** This is no longer required with the 1.1.9.xx version of marlin Bug Fixes * Retraction now enabled on initial travel moves * Conical and tree supports are now limited to build volume ===Cura 3.2.32 || Release Date: 11/19/2018=== Machines and Tool Heads * Added support for Small Layer (SL) Tool Head (0.25mm) to Mini 1, TAZ 5, TAZ 6 * Added Support for Single Extruder (SE) Tool Head (0.5mm) to Mini 1, TAZ 5, TAZ 6 * Added Support for High Speed (HS) Tool Head (0.8mm) to Mini 1, Mini 2, TAZ 5, TAZ 6 * Added Support for High Speed Plus (HS+) Tool Head (1.2mm) to Mini 1, Mini 2, TAZ 5, TAZ 6 ** Renamed Aerostruder v2 Micro to Small Layer (SL) | 0.25mm (Micro) for Mini 2 Profiles and Materials * Added Dual V2 PVA profile * Added/Updated TAZ 5 Dual V2 profiles for: ** CSL ABS, IC3D ABS, Alloy 910, Silk, Linen, Bridge, Coffee, Conductive PLA, HIPS, HTPLA, Inova 1800, Magnetic Iron, PC-ABS, PC-Max, PCTPE, PC, VP PLA, PVA, Polylite PLA, Stainless Steel PLA * Added PA-CF for HS and HS+ tool heads * Added Xtrand to experimental for HS and HS+ * Updated Alloy 910 temperatures to 255 Firmware * All LulzBot Printers to 1.1.9.28 FW ** Renamed Aerostruder v2 Micro to Small Layer (SL) | 0.25mm (Micro) ** Enabled Marlin Keep Host Alive feature to improve Octoprint Communication ** Reduced Mini 1 and Mini 2 acceleration from 2000 to 1000 to help print quality ** Updated re-wipe temperature to better coincide with filament variety ** Linear advanced enabled for all printers, but not activated *** Must enter M900 K<float> in start gcode to activate. See more info here: http://marlinfw.org/docs/gcode/M900.html ** Updated Customer Facing Names in M115 response Bug Fixes: * Fixed USB print pausing that was caused by a failed error recovery between Marlin and Cura LE * Disabled "AppNap" feature on MacOS that would interrupt USB printing when Cura LE was minimized * Fixed typo in TAZ 5 Dual v2 start gcode that prevented a nozzle from heating before printing **_________________________________________________________________________** ===Cura 3.2.27 || Release Date: 9/12/2018=== Features * New machine and tool head selection menu for LulzBot 3D printers * Made it easier to share custom materials and custom profiles based on those materials Machines and Tool Heads * Added LulzBot Mini 2 Aerostruder Micro (0.25mm nozzle) tool head * Added experimental Banded Tiger and Dingy Cutworm tool heads Profiles * Added LulzBot Mini 2 Aerostruder Micro tool head profiles * Organized Twool Head profiles and naming * Added experimental filament profiles for Banded Tiger and Dingy Cutworm tool heads Firmware * All LulzBot 3D printers and tool heads updated to Marlin 1.1.9.16 firmware. This is a major firmware update that fixes numerous issues found in 1.1.8. Please report any issues on the [[ https://code.alephobjects.com/project/board/6/ | Marlin project work board ]] * Marlin 1.1.9 requires a start gcode change to prevent compensation stack up with bed leveling. M420 S0 before wiping/probing has been added, and M420 S1 after G29 to prevent this issue. Bug Fixes * Fixed issue that duplicates model when loading T3049 * Corrected build volume for V2 dual extruders T2960 * Fixed small increment rotation bug T3240 * Fixed wipe nozzle button for TAZ 6 T3148 **_________________________________________________________________________** ===Cura 3.2.23 || Release Date: 7/23/2018 === Features * Z-axis backlash compensation has been included within cura-engine * Improved pause at layer plugin (Big thanks to b-morgan) * Added "bottom view" quick glance button * Duplicated materials will now include copies of the original slicing profiles Machines * Added Mini 2 Achemon (0.25mm nozzle) Profiles * Fixed TAZ 6 MatterHackers PRO PLA profiles * Added Mini 2 Achemon profiles * Z-axis backlash fading turned on by default for all Mini 2 profiles * Improved Mini 2 PolyFlex Profiles * Standardized profile naming * IC3D PETG profiles moved out of Experimental to Intermediate * Added all rigid material profiles to V2 Flexy Dualies under Experimental Firmware * All machines updated to Marlin 1.1.8.62. This firmware is identical to version 1.1.8.59 and adds license information for Arduino Add-ons Bug Fixes * Fixed positioning issue which would cause objects to move relatively when positioning on the platform * Fixed TAZ 6 start gcode which was ignoring initial layer temperature setting * Fixed beginning purge on Dual Extruder v3 Extruder 2 * Fixed location of post processing button when these scripts are activated **_________________________________________________________________________** ===Cura 3.2.21 || Release Date: 6/4/2018 === Features * Merge upstream 3.2 from Ultimaker: https://ultimaker.com/en/products/cura-software/release-notes * New Features: -- Note: Experimental features and functionality may not be optimized, and may require setting changes for ideal results -- Experimental: Tree Support uses "branches" for improved support performance and efficiency -- Moved out of Experimental: Adaptive layers allows for variable thickness for details where you want it and speed when you don't -- Improvements to Ironing, for smoother top-surface layers * Faster start up times compared to 2.6 version * LulzBot Mini 2 3D Printer point and click operation * Enables timer display on Graphical LCD Controller while printing through USB * Added support for community developed LulzBot TAZ 6 Twoolhead machine, materials, and profiles (LulzBot TAZ 5 coming soon) Materials and Profiles * Improved custom material profile creation for easier sharing * New Material Support for LulzBot TAZ 6 and LulzBot Mini: -- Experimental: MatterHackers PRO series PLA -- Experimental: MatterHackers Build series PLA Firmware * All LulzBot 3D printers updated to Marlin version 1.1.8.59 Bug Fixes * Fixed issue with OctoPrint plugin (Big thanks to fieldOfView) * Improved USB reliability * Added scroll bar to machine settings for ease of use * Fixed re-load all models * Fixed selectable baud rate and port, it will no longer revert after changing * Fixed duplication issue when updating material costs * Fixed a crash when updating material density * Fixed LulzBot TAZ 5 MOARstruder profile causing poor performance **_________________________________________________________________________** ===Cura 2.6.69 || Release Date: 2/13/2018 === Firmware - Marlin 1.1.5.71 * Fixed dual extruder timeout while using OctoPrint Bug Fixes * Blurry text fixed on recommended infill percentages * Fixed crash when loading binary STL with "solid" string in the header Features * Automatically update EEPROM after flashing by default (can be disabled via check box) * Re-prime added to end gcode for Aerostruders and v3 Dual Extruder Material and Filament Profiles * Update to INOVA-1800 MOARstruder profiles * Added vendor name to PC+PBT (Push Plastics) * PolyDissolve S1 added to v2 Dual Extruders * Increased Verbatim PLA bed temps from 45 -> 60 * Increased NinjaFlex printing temp for high output profiles * Added PETg Experimental Profiles -- IC3D PETg -- Chroma Strand Labs PETg -- Polymaker PETg **_________________________________________________________________________** ===Cura 2.6.66 || Release Date: 1/15/2018 === Cura LulzBot Edition version 2.6.66 contains firmware standardized for use with all LulzBot Mini 3D Printers, and contains important bug fixes. However, once your firmware has been updated to 1.1.5.70, GCode files sliced with earlier versions of Cura LE will no longer be compatible and will have to be re-sliced using the latest version of Cura LE. We recommend using the latest firmware included within Cura LulzBot Edition to maximize long-term compatibility. Users that need to use existing GCode files can restore compatible firmware (1.1.5.64 or below) through Legacy Cura LulzBot Edition v21.08. Firmware - 1.1.5.70 * Adjusted wipe height for LulzBot Minis * Increase tx buffer * Adjusted PID settings for Aerostruders to increase stability * Change Baud Rate to 250000 for Minis for better communication -- If using a different host, be sure to update your settings * Update probe positioning to avoid end stop collision Start/End Gcode * Adjusted wipe location for Mini * Added re-prime end gcode to Aerostruders to prevent die swell Material and Filament Profiles * Added experimental material category -- These included base profiles are not refined, but are a good starting point * Fixed new profiles being associated to incorrect material * Adjusted flow rate for flexible materials on Aerostruders Display * Added final print timer **_________________________________________________________________________** ===Cura 2.6.63 || Release Date: 12/22/17=== Firmware - 1.1.5.64 * Re-ordered probe sequence to match legacy Cura * Updated probing locations on washers * Prevents v3 dual extruder from re-homing x/y during print * Change filament function added for E1 and E2 on dual extruders * Raise head during homing to prevent crash on v3 dual extruder and Mini * Estep settings now increment by a full step * Fixed resume bug after pausing through LCD Start Gcode Changes * TAZ 6 start gcode modified so wiping does not trigger endstop -- Fixes need to power cycle between prints * Mini start gcode adjusted to account for shorter travel distance in X of previous versions -- Fixes mid air printing -- Fixes the need to power cycle between prints * Dual v3 Start Gcode has been updated to take into account Marlin Coordinate Shift Filament Profiles * Push Plastics HIPS added * PC+PBT Push Plastics Added CuraLE Repo * Added adhesion information box to allow for material specific notes * Added start gcode to allow softening temperature before wipe, along with temperatures used for testing * Added machine warning when firmware on printer does not match what is included within Cura LE * Fixed custom material bugs -- No longer duplicates every quality profile when adding new material -- Can now edit custom materials after creation Cura Engine - Added first layer initial flow rate to compensate for various filament die swell CuraLE Post Processing * Added plug in for user written post processing scripts (Submitted by FieldOfView) Uranium * Fixed rotation issue with reset button * Fixed issue with OpenGL 4.1 shaders * Fixed issue with Dual Extruder slicing pulling incorrect temperature * Added extruder selection for pre-heat on dual extruder machines **_________________________________________________________________________** ===Cura 2.6.52=== * Initial Release of Cura LulzBot Edition * https://www.lulzbot.com/learn/tutorials/cura-lulzbot-edition-whats-new

=Release Notes= ===Cura 2.6.63=== (Release Date: 12/22/17) Firmware - 1.1.5.64 * Re-ordered probe sequence to match legacy Cura * Updated probing locations on washers * Prevents v3 dual extruder from re-homing x/y during print * Change filament function added for E1 and E2 on dual extruders * Raise head during homing to prevent crash on v3 dual extruder and Mini * Estep settings now increment by a full step * Fixed resume bug after pausing through LCD Start Gcode Changes * TAZ 6 start gcode modified so wiping does not trigger endstop -- Fixes need to power cycle between prints * Mini start gcode adjusted to account for shorter travel distance in X of previous versions -- Fixes mid air printing -- Fixes the need to power cycle between prints * Dual v3 Start Gcode has been updated to take into account Marlin Coordinate Shift Filament Profiles * Push Plastics HIPS added * PC+PBT Push Plastics Added CuraLE Repo * Added adhesion information box to allow for material specific notes * Added start gcode to allow softening temperature before wipe, along with temperatures used for testing * Added machine warning when firmware on printer does not match what is included within Cura LE * Fixed custom material bugs -- No longer duplicates every quality profile when adding new material -- Can now edit custom materials after creation Cura Engine - Added first layer initial flow rate to compensate for various filament die swell CuraLE Post Processing * Added plug in for user written post processing scripts Uranium * Fixed rotation issue with reset button * Fixed issue with OpenGL 4.1 shaders * Fixed issue with Dual Extruder slicing pulling incorrect temperature * Added extruder selection for pre-heat on dual extruder machines ===Cura 3.6.21 || Release Date: 10/11/19=== New Printers * LulzBot Bio ** Profiles for Collagen and Sodium Alginate ** 2.0.0.174 Firmware ** Adjusted recommended settings for ease of use New Materials * IC3D PLA for Workhorse, Pro, and Mini 2 Profile Updates * Improved Workhorse PLA Profiles * Improved Pro PLA Profiles Bug Fixes * Improved reliability of serial USB Connection * Fixed brim setting for nGen on TAZ Pro * Fixed input field size causing issues on some monitor resolutions ===Cura 3.6.20 || Release Date: 9/20/19=== Profile Updates * TAZ Pro ** CSL ABS, IC3D ABS, 910, Bridge, NinjaFlex, PA-CF, Polymax PC, IC3D PETg, Polycast, Polylite, nGen, Polydissolve, PVA, Polyflex * TAZ Workhorse ** CSL ABS, IC3D ABS, Alloy 910, Bridge Nylon, NinjaFlex, PA-CF, Polymx PC, PETg, Polycast, Polylite, nGen Material Updates * TAZ Pro and Workhorse ** Added Polymaker CoPA, PA6-GF, PA6-CF * Mini 2 ** IC3D PLA Bug Fixes * Fixed issue where profile changes were not saved when creating/exporting ** Prime tower location, Birdge Detection * Updated links to correct products * Fixed bed compensation stack up for TAZ 6 FlexyDually v2 * Fixed rounding error displaying layer height **_________________________________________________________________________** ===Cura 3.6.18 || Release Date: 7/31/19=== Profile Updates * TAZ Workhorse ** NinjaFlex - High Detail update to reduce stringing and improve quality ** ABS - Update to improve strength while maintaining improved overhangs ** PETg - Improvements to both overhangs and strength * TAZ 6 ** Updated dual v3 prime tower positions to be within build area by default Other * Update EEPROM check box disabled by default for TAZ Pro and TAZ Workhorse to maintain calibration data between firmware updates * "Print one at a time" now available on dual machines when only using one extruder for the print and "no material" in the other Bug Fixes * Fixed firmware flashing issue with 32bit archim boards causing Cura to crash after updating firmware on Windows 10 * Fixed firmware naming mismatch causing Workhorse printers to throw a warning while connecting * Fixed Cura crash when selecting "wipe nozzle" button without a model loaded * Fixed Cura crash when unplugging USB from the computer while connected **_________________________________________________________________________** ===Cura 3.6.15 || Release Date: 7/22/19=== New Printers * TAZ Workhorse ** SL, HE, HS, HS+, Dual v3 Profiles and Materials added Profile Updates * TAZ Pro No Material Update ** All settings from "No Material" are ignored. This option should activated on the inactive extruder when only using one extruder for printing * IC3D ABS Profile Updates * Polylite PLA Profile Updates * CSL ABS Updates Firmware Update * TAZ Pro and Workhorse updated to marlin 2.0.0.144 Bug Fixes: * Fixed machine addition bug making it possible to select an incompatible tool head combination * Fixed TAZ Pro Wipe Nozzle Button ===Cura 3.6.13 || Release Date: 7/1/19=== Profile Updates * TAZ Pro ** Fixed incorrect layer height setting for standard Polylite PLA **_________________________________________________________________________** ===Cura 3.6.12 || Release Date: 6/25/19=== Profile Updates * TAZ Pro ** Updates to: PA-CF, PolyLite PLA, NinjaFlex, eSUN PVA, PolyFlex, Alloy 920GF, Alloy 910 Material Updates * IC3D PLA added to TAZ 6 SE Tool head * PA-CF density updated Firmware Update * TAZ Pro firmware set to 2.0.0.135 * Fixed issue with automatic offset calibration Features * Added extruder selection when adding brim and raft in dual-headed machines Bug Fixes * Fixed bug with first layer flow rate not returning to set flow rate after first layer * Fixed issue with incorrect variable in start GCODE for bed temperature initial layer * Fixed support infill layer height mismatch during dual extrusion * Fixed display issue showing overly large buttons * Fixed issue where tool head travel limits are not taken into account when using E2 as support (Pro) * Movement and hot end settings no longer revert when moving from monitor to prepare screen Printer Updates * TAZ Workhorse Edition added for all compatible tool head combinations and initial profiles for testing **_________________________________________________________________________** ===Cura 3.6.8 || Release Date: 5/2/19=== New Printers * LulzBot TAZ Pro and associated profiles ** TAZ Pro firmware = Marlin 2.0.0.110 New Features * Updated extruder switch mechanics for dual headed machines * Flashing of 32 bit boards using bin files * Manual control movements are now remembered when switching to and from prepare screen * Can now load multiple STL files at once Bug fixes * Fixed the improper display of layer heights while using dual extrusion * Fixed issue where machine buttons were not consistent between machines **_________________________________________________________________________** ===Cura 3.6.3 || Release Date: 2/20/19=== * Merged 3.6 cura engine from upstream New Features * Bridging detection included in experimental settings ** Control your fan speed, flow rate, movement speed, and more for bridging moves only * Custom Support Plugin ** Point and click to select support locations. (Must disable automatically drop to build plate in preferences.) * Support Blocker Plugin ** Point and click to select locations that will not be supported. (Must disable automatically drop to build plate in preferences.) * Circular prime tower will help prevent failure mid print * Retractions can now be turned off on support moves * Gyroid Infill * Brim now has option to print only on the outer edge of object New Materials * PolyCast Profiles added for all printers User Interface Changes * Added LulzBot Dark Theme ** Preferences > Configure Cura > Theme > LulzBot Dark > Restart Cura * Fixed extruder 2 progress bar color in monitor tab Firmware updated to 1.1.9.34 for all LulzBot Printers * Updated motor current for adapter tool heads to prevent clicking * Enabled Z backlash compensation for all TAZ 6, Mini 1, Mini 2 ** Define fading distance in quality, if set to 0 it is not enabled * Updated heating temperatures during re-wipe sequence Start Gcode * Removed superfluous G21 commands from start gcode ** This is no longer required with the 1.1.9.xx version of marlin Bug Fixes * Retraction now enabled on initial travel moves * Conical and tree supports are now limited to build volume ===Cura 3.2.32 || Release Date: 11/19/2018=== Machines and Tool Heads * Added support for Small Layer (SL) Tool Head (0.25mm) to Mini 1, TAZ 5, TAZ 6 * Added Support for Single Extruder (SE) Tool Head (0.5mm) to Mini 1, TAZ 5, TAZ 6 * Added Support for High Speed (HS) Tool Head (0.8mm) to Mini 1, Mini 2, TAZ 5, TAZ 6 * Added Support for High Speed Plus (HS+) Tool Head (1.2mm) to Mini 1, Mini 2, TAZ 5, TAZ 6 ** Renamed Aerostruder v2 Micro to Small Layer (SL) | 0.25mm (Micro) for Mini 2 Profiles and Materials * Added Dual V2 PVA profile * Added/Updated TAZ 5 Dual V2 profiles for: ** CSL ABS, IC3D ABS, Alloy 910, Silk, Linen, Bridge, Coffee, Conductive PLA, HIPS, HTPLA, Inova 1800, Magnetic Iron, PC-ABS, PC-Max, PCTPE, PC, VP PLA, PVA, Polylite PLA, Stainless Steel PLA * Added PA-CF for HS and HS+ tool heads * Added Xtrand to experimental for HS and HS+ * Updated Alloy 910 temperatures to 255 Firmware * All LulzBot Printers to 1.1.9.28 FW ** Renamed Aerostruder v2 Micro to Small Layer (SL) | 0.25mm (Micro) ** Enabled Marlin Keep Host Alive feature to improve Octoprint Communication ** Reduced Mini 1 and Mini 2 acceleration from 2000 to 1000 to help print quality ** Updated re-wipe temperature to better coincide with filament variety ** Linear advanced enabled for all printers, but not activated *** Must enter M900 K<float> in start gcode to activate. See more info here: http://marlinfw.org/docs/gcode/M900.html ** Updated Customer Facing Names in M115 response Bug Fixes: * Fixed USB print pausing that was caused by a failed error recovery between Marlin and Cura LE * Disabled "AppNap" feature on MacOS that would interrupt USB printing when Cura LE was minimized * Fixed typo in TAZ 5 Dual v2 start gcode that prevented a nozzle from heating before printing **_________________________________________________________________________** ===Cura 3.2.27 || Release Date: 9/12/2018=== Features * New machine and tool head selection menu for LulzBot 3D printers * Made it easier to share custom materials and custom profiles based on those materials Machines and Tool Heads * Added LulzBot Mini 2 Aerostruder Micro (0.25mm nozzle) tool head * Added experimental Banded Tiger and Dingy Cutworm tool heads Profiles * Added LulzBot Mini 2 Aerostruder Micro tool head profiles * Organized Twool Head profiles and naming * Added experimental filament profiles for Banded Tiger and Dingy Cutworm tool heads Firmware * All LulzBot 3D printers and tool heads updated to Marlin 1.1.9.16 firmware. This is a major firmware update that fixes numerous issues found in 1.1.8. Please report any issues on the [[ https://code.alephobjects.com/project/board/6/ | Marlin project work board ]] * Marlin 1.1.9 requires a start gcode change to prevent compensation stack up with bed leveling. M420 S0 before wiping/probing has been added, and M420 S1 after G29 to prevent this issue. Bug Fixes * Fixed issue that duplicates model when loading T3049 * Corrected build volume for V2 dual extruders T2960 * Fixed small increment rotation bug T3240 * Fixed wipe nozzle button for TAZ 6 T3148 **_________________________________________________________________________** ===Cura 3.2.23 || Release Date: 7/23/2018 === Features * Z-axis backlash compensation has been included within cura-engine * Improved pause at layer plugin (Big thanks to b-morgan) * Added "bottom view" quick glance button * Duplicated materials will now include copies of the original slicing profiles Machines * Added Mini 2 Achemon (0.25mm nozzle) Profiles * Fixed TAZ 6 MatterHackers PRO PLA profiles * Added Mini 2 Achemon profiles * Z-axis backlash fading turned on by default for all Mini 2 profiles * Improved Mini 2 PolyFlex Profiles * Standardized profile naming * IC3D PETG profiles moved out of Experimental to Intermediate * Added all rigid material profiles to V2 Flexy Dualies under Experimental Firmware * All machines updated to Marlin 1.1.8.62. This firmware is identical to version 1.1.8.59 and adds license information for Arduino Add-ons Bug Fixes * Fixed positioning issue which would cause objects to move relatively when positioning on the platform * Fixed TAZ 6 start gcode which was ignoring initial layer temperature setting * Fixed beginning purge on Dual Extruder v3 Extruder 2 * Fixed location of post processing button when these scripts are activated **_________________________________________________________________________** ===Cura 3.2.21 || Release Date: 6/4/2018 === Features * Merge upstream 3.2 from Ultimaker: https://ultimaker.com/en/products/cura-software/release-notes * New Features: -- Note: Experimental features and functionality may not be optimized, and may require setting changes for ideal results -- Experimental: Tree Support uses "branches" for improved support performance and efficiency -- Moved out of Experimental: Adaptive layers allows for variable thickness for details where you want it and speed when you don't -- Improvements to Ironing, for smoother top-surface layers * Faster start up times compared to 2.6 version * LulzBot Mini 2 3D Printer point and click operation * Enables timer display on Graphical LCD Controller while printing through USB * Added support for community developed LulzBot TAZ 6 Twoolhead machine, materials, and profiles (LulzBot TAZ 5 coming soon) Materials and Profiles * Improved custom material profile creation for easier sharing * New Material Support for LulzBot TAZ 6 and LulzBot Mini: -- Experimental: MatterHackers PRO series PLA -- Experimental: MatterHackers Build series PLA Firmware * All LulzBot 3D printers updated to Marlin version 1.1.8.59 Bug Fixes * Fixed issue with OctoPrint plugin (Big thanks to fieldOfView) * Improved USB reliability * Added scroll bar to machine settings for ease of use * Fixed re-load all models * Fixed selectable baud rate and port, it will no longer revert after changing * Fixed duplication issue when updating material costs * Fixed a crash when updating material density * Fixed LulzBot TAZ 5 MOARstruder profile causing poor performance **_________________________________________________________________________** ===Cura 2.6.69 || Release Date: 2/13/2018 === Firmware - Marlin 1.1.5.71 * Fixed dual extruder timeout while using OctoPrint Bug Fixes * Blurry text fixed on recommended infill percentages * Fixed crash when loading binary STL with "solid" string in the header Features * Automatically update EEPROM after flashing by default (can be disabled via check box) * Re-prime added to end gcode for Aerostruders and v3 Dual Extruder Material and Filament Profiles * Update to INOVA-1800 MOARstruder profiles * Added vendor name to PC+PBT (Push Plastics) * PolyDissolve S1 added to v2 Dual Extruders * Increased Verbatim PLA bed temps from 45 -> 60 * Increased NinjaFlex printing temp for high output profiles * Added PETg Experimental Profiles -- IC3D PETg -- Chroma Strand Labs PETg -- Polymaker PETg **_________________________________________________________________________** ===Cura 2.6.66 || Release Date: 1/15/2018 === Cura LulzBot Edition version 2.6.66 contains firmware standardized for use with all LulzBot Mini 3D Printers, and contains important bug fixes. However, once your firmware has been updated to 1.1.5.70, GCode files sliced with earlier versions of Cura LE will no longer be compatible and will have to be re-sliced using the latest version of Cura LE. We recommend using the latest firmware included within Cura LulzBot Edition to maximize long-term compatibility. Users that need to use existing GCode files can restore compatible firmware (1.1.5.64 or below) through Legacy Cura LulzBot Edition v21.08. Firmware - 1.1.5.70 * Adjusted wipe height for LulzBot Minis * Increase tx buffer * Adjusted PID settings for Aerostruders to increase stability * Change Baud Rate to 250000 for Minis for better communication -- If using a different host, be sure to update your settings * Update probe positioning to avoid end stop collision Start/End Gcode * Adjusted wipe location for Mini * Added re-prime end gcode to Aerostruders to prevent die swell Material and Filament Profiles * Added experimental material category -- These included base profiles are not refined, but are a good starting point * Fixed new profiles being associated to incorrect material * Adjusted flow rate for flexible materials on Aerostruders Display * Added final print timer **_________________________________________________________________________** ===Cura 2.6.63 || Release Date: 12/22/17=== Firmware - 1.1.5.64 * Re-ordered probe sequence to match legacy Cura * Updated probing locations on washers * Prevents v3 dual extruder from re-homing x/y during print * Change filament function added for E1 and E2 on dual extruders * Raise head during homing to prevent crash on v3 dual extruder and Mini * Estep settings now increment by a full step * Fixed resume bug after pausing through LCD Start Gcode Changes * TAZ 6 start gcode modified so wiping does not trigger endstop -- Fixes need to power cycle between prints * Mini start gcode adjusted to account for shorter travel distance in X of previous versions -- Fixes mid air printing -- Fixes the need to power cycle between prints * Dual v3 Start Gcode has been updated to take into account Marlin Coordinate Shift Filament Profiles * Push Plastics HIPS added * PC+PBT Push Plastics Added CuraLE Repo * Added adhesion information box to allow for material specific notes * Added start gcode to allow softening temperature before wipe, along with temperatures used for testing * Added machine warning when firmware on printer does not match what is included within Cura LE * Fixed custom material bugs -- No longer duplicates every quality profile when adding new material -- Can now edit custom materials after creation Cura Engine - Added first layer initial flow rate to compensate for various filament die swell CuraLE Post Processing * Added plug in for user written post processing scripts (Submitted by FieldOfView) Uranium * Fixed rotation issue with reset button * Fixed issue with OpenGL 4.1 shaders * Fixed issue with Dual Extruder slicing pulling incorrect temperature * Added extruder selection for pre-heat on dual extruder machines **_________________________________________________________________________** ===Cura 2.6.52=== * Initial Release of Cura LulzBot Edition * https://www.lulzbot.com/learn/tutorials/cura-lulzbot-edition-whats-new