AngelfishProject
ActivePublic

Details

Description

Report any issues or suggestions for Angelfish here

Recent Activity

Thu, Dec 6

karrad added a comment to T2039: Aerostruder Thermal Runaway Post Thermistor Fix.

@anolen We can do a mass update, but not sure on testing.

Thu, Dec 6, 1:43 PM · Finch, Angelfish
anolen added a comment to T2039: Aerostruder Thermal Runaway Post Thermistor Fix.

I have been taking this into consideration for all new profiles and for all edits coming my way, as far as making a mass change I am unsure, @karrad, any thoughts? I don't anticipate major issues if we approve this change for all profiles but as for a quick fix it might be an issue, each profile will have a different layer height and thus a different layer to activate the fan.

Thu, Dec 6, 1:39 PM · Finch, Angelfish
lansky added a comment to T2039: Aerostruder Thermal Runaway Post Thermistor Fix.

@anolen Is there a plan to change our existing profiles to activate the fan higher up?

Thu, Dec 6, 9:52 AM · Finch, Angelfish
anolen closed T2039: Aerostruder Thermal Runaway Post Thermistor Fix as Resolved.
Thu, Dec 6, 8:54 AM · Finch, Angelfish
anolen added a comment to T2039: Aerostruder Thermal Runaway Post Thermistor Fix.

We determined that the main culprit of drastic temp drops was low layer fan activation, this causes the air from the fan to hit the bed and reflect back up onto the heater block, after a few more layers there is a large enough gap between toolhead and bed that the air will flow outward. To fix you can increase your "Regular Fan Speed At Layer", this will give the printer a longer time for the fan to ramp up to the regular fan speed setting.

Thu, Dec 6, 8:54 AM · Finch, Angelfish

Jun 19 2018

alexei added a watcher for Angelfish: alexei.
Jun 19 2018, 10:01 AM

Jun 1 2018

karrad reassigned T2039: Aerostruder Thermal Runaway Post Thermistor Fix from karrad to anolen.

@anolen Here we have reports of temperature drop issues on the Aerostruder add-on tool heads. These are reports after a known thermistor fix, so hardware should not be an issue. Can you please try to duplicate these, and see if profile tweaks will help prevent the temperature drops.

Jun 1 2018, 11:21 AM · Finch, Angelfish

Apr 8 2018

bigmansas added a comment to T2039: Aerostruder Thermal Runaway Post Thermistor Fix.

Helpdesk ID: 161776

Apr 8 2018, 7:46 AM · Finch, Angelfish

Apr 6 2018

lansky added a comment to T2039: Aerostruder Thermal Runaway Post Thermistor Fix.

-What Cura version you are using: 2.6.69
-What Firmware version you are using: 1.1.5.71
-What filament profile you are using: multiple, see below
-What filament you are using, multiple
This is a Mini Aerostruder. RMA10661, previous case RMA10483. We soldered connections in previous RMA and user is still getting issues, we are replacing toolhead. User gave us a lot of great testing info below:
"Polylite PLA - No Modifications

Apr 6 2018, 2:02 PM · Finch, Angelfish

Mar 27 2018

lansky added a comment to T2039: Aerostruder Thermal Runaway Post Thermistor Fix.

-What Cura version you are using: 2.6.69
-What Firmware version you are using: 1.1.5.71
-What filament profile you are using: ABS Village Plastic, tried both standard and high detail
-What filament you are using ABS from Village plastic
Previous case RMA10234, replacement under RMA10588

Mar 27 2018, 12:53 PM · Finch, Angelfish
karrad closed T2223: Retract filament at the end of a print as Wontfix.

We have a retract before the tool head moves to parking position at the end of the print. We re-prime the Aerostruders and V3 Dual extruders to prevent a die swell jam that was reported early on. See T1724 for more details.

Mar 27 2018, 7:12 AM · Mini-Hibiscus, Finch, Angelfish

Mar 26 2018

logan added a comment to T2223: Retract filament at the end of a print.

How far would we want to retract? Past the heatbreak or all the way out?
What if a user just wants to restart? If we back up and the filament cant get back into the heatbreak could make matters worse maybe?

Mar 26 2018, 2:08 PM · Mini-Hibiscus, Finch, Angelfish
DaniAO triaged T2223: Retract filament at the end of a print as Normal priority.
Mar 26 2018, 1:12 PM · Mini-Hibiscus, Finch, Angelfish

Mar 23 2018

johnson added a comment to T2039: Aerostruder Thermal Runaway Post Thermistor Fix.

Ticket 160530

Mar 23 2018, 4:51 PM · Finch, Angelfish

Mar 20 2018

karrad closed T1860: Polylite PLA, Cura LE settings as Resolved.

@MikeR Going to close this one down. If you are still having issues after flashing with Cura 3.2.13 pleas re-open

Mar 20 2018, 8:27 AM · Angelfish

Mar 15 2018

nickp closed T1990: Packaging Label Location Change as Resolved.

This has been completed

Mar 15 2018, 2:16 PM · Angelfish, Finch
karrad added a comment to T1990: Packaging Label Location Change.

@nickp How is the progress on this guy?

Mar 15 2018, 1:58 PM · Angelfish, Finch

Feb 28 2018

karrad updated the task description for T2039: Aerostruder Thermal Runaway Post Thermistor Fix.
Feb 28 2018, 8:12 AM · Finch, Angelfish
karrad updated subscribers of T2039: Aerostruder Thermal Runaway Post Thermistor Fix.
Feb 28 2018, 7:44 AM · Finch, Angelfish
karrad triaged T2039: Aerostruder Thermal Runaway Post Thermistor Fix as Normal priority.
Feb 28 2018, 7:41 AM · Finch, Angelfish

Feb 21 2018

karrad removed a project from T1990: Packaging Label Location Change: Yellowfin.
Feb 21 2018, 2:25 PM · Angelfish, Finch
karrad triaged T1990: Packaging Label Location Change as Normal priority.
Feb 21 2018, 2:25 PM · Angelfish, Finch

Feb 12 2018

tutley added a comment to T1860: Polylite PLA, Cura LE settings.

@MikeR when you flashed aero firmware did you then do an M502 to restore default settings and M500 to save it. The PID that is attached to the firmware will not be stored in the EEPROM unless you do this. So you might have been running the wrong PID. check out T1750. Im currently verifying with another TAZ aerostruder that i am getting good temp recovery with these settings.

Feb 12 2018, 10:46 AM · Angelfish
west updated subscribers of T1860: Polylite PLA, Cura LE settings.

@MikeR , we are looking into this now. The fan turning on 2 layers above the bed is necessary from what ive seen. We found a PID that seemed to work for mini aerostruder with the fan that close. We should be able to find one for TAZ
@tutley

Feb 12 2018, 9:10 AM · Angelfish

Feb 7 2018

DaniAO added a comment to T1860: Polylite PLA, Cura LE settings.

This is something we are aware of and a fix is in the works with firmware. We will keep you updated once there is more info.

Feb 7 2018, 10:45 AM · Angelfish
karrad assigned T1860: Polylite PLA, Cura LE settings to DaniAO.
Feb 7 2018, 7:40 AM · Angelfish

Feb 6 2018

MikeR updated subscribers of T1860: Polylite PLA, Cura LE settings.
Feb 6 2018, 11:27 AM · Angelfish
MikeR created T1860: Polylite PLA, Cura LE settings.
Feb 6 2018, 11:25 AM · Angelfish

Jan 30 2018

alexei changed the edit policy for Angelfish.
Jan 30 2018, 10:34 AM
alexei added a member for Angelfish: DaniAO.
Jan 30 2018, 10:33 AM
alexei added a member for Angelfish: alexei.
Jan 30 2018, 10:33 AM

Jan 16 2018

glatti closed T1416: Customer no longer need up update esteps as Resolved.
Jan 16 2018, 3:36 PM · Angelfish

Jan 2 2018

DaniAO added a watcher for Angelfish: DaniAO.
Jan 2 2018, 11:06 AM

Dec 4 2017

DaniAO renamed T1416: Customer no longer need up update esteps from Customer no longer need up update esteps forum post to Customer no longer need up update esteps.
Dec 4 2017, 11:28 AM · Angelfish
DaniAO created T1416: Customer no longer need up update esteps.
Dec 4 2017, 11:27 AM · Angelfish

Nov 10 2017

karrad created Angelfish.
Nov 10 2017, 10:19 AM