Fri, Jun 14
Artwork is attached and located here:
Only thing about the blue screws are they aren't going to match the blue from the lago. They will be the blue screws that we currently use to attach the Mini 2 and TAZ Pro tool heads.
Lets see if we can get the blue and white screws in for visual comparison. We have the black screws on hand, we know what they look like, and is our current fall back option.
Thu, Jun 13
We will for sure on the Certfications stickers on the back.. and from what I understood will do it for the Fresh cert as well.
Here you go Tyler!
@jperry any updates on this.
as soon as i get part numbers i can get the drawings updated and we can get a PO rolling through JMT to get these for alpha builds
Designs are all complete. I just need to know a final decision on if we're using stickers for any of the elements on the printer.
All of the printed parts will be in black, so the black screws should match with that. My concern about the blue screws is that it won't match the blue silk screen and we will have the issues with the color coming off as they are installed.
@DRobertson was working on this and is pretty close.. if not done.
Could we see if Specialty hardware can find the screws in blue dye. I think the only screws we are looking for are M3x6 FHCS and M3x8 BHCS
Tue, Jun 11
@jperry can you create the part numbers for Tyler please?
Mon, Jun 10
Fri, Jun 7
Thu, Jun 6
current profile settings
One thing we can consider to address the different petri dishes, is to make this a quick option in recommended settings.
also under hot end settings
Note the machine changes for build plate size were set based on the small petri dish i have been testing with and these values may need to be changed later depending on the desired petri dish size
I built the machine off of the Mini2 SL, but you could use SE or whatever
@tutley can you please put the current start and end gcode you are using and any other machine profile changes that are different from the Mini 2?
Wed, Jun 5
Tue, Jun 4
Mon, Jun 3
Wed, May 29
This printer has been delivered to creative for artwork, closing this guy down.
@karrad is working on putting together a frame of the white sheet metal we go in from PMM.
@Steven I think this ticket is good to close
Tue, May 28
nope, it should be good
So then there shouldnt be any change to the x extruder harness?
it is actually using the gladiola xmax wires